TSL - Technology

This blade can be supplied in lengths between 3656mm - 3962mm (12-13ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• Fully hardened high carbon steel bit • Precision ground tri-point bit for a clean cut and reduced splintering • Sizes: 10, 16, 20, 22, 25 and 32mm bits • For drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass • For use with drills, drivers and hand braces Pack of 6.

Suitable for use in chip forges and chip brazing hearths. 12.5kg

• Machine Type - Medium /Bench or Pedestal • Method of attachment - Secures around depth stop collar using fixing top to suit configuration • Positive Manual latch • Flip up with spring retention • Construction - Aluminium/Nylon with Polycarbonate Vizor which encloses the work area • Operation - Telescopes on contact with work piece, length adjustable vizor Please state collar size when ordering. Maximum chuck dia. for the MT is 63mm / MTS is 70mm.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area Collar size: 62.5mm

Meddings drill guard to fit Meddings Driltru: L1 L2 M2 M4 & MV4. Clamp diameter for Drill guard 64mm.

• Machine Type - Medium /Bench or Pedestal • Method of attachment - Secures around depth stop collar using fixing top to suit configuration • Positive Manual latch • Flip up with spring retention • Construction - Aluminium/Nylon with Polycarbonate Vizor which encloses the work area • Operation - Telescopes on contact with work piece, length adjustable vizor Please state collar size when ordering. Maximum chuck dia. for the MT is 63mm / MTS is 70mm.

M2 Min-Max Vertical height: 250-450mm Overall length - enclosed: 475-800mm Overall length - extended: 925-1250mm Please note: We require T-slot size to match this product to your machine.

Spare vizor for BT Drill guard (590-204 & 590-204X). Constructed from scratch resistant polycarbonate.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area The maximum collar size for the BT is 70mm (minimum 40mm). Please state collar size when ordering.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area Collar size: 64mm

A range of accessories for use with any extractor. Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc. BZP Size 5 Adjustment . 90 - 120mm Adjustment. 3.1/2 - 4.3/4in

A cartridge filter for the Woodvac TS100.

Filter bags for WV150 Pack of 6

Pack of 5 standard poly waste bags. Size 915mm x 812mm (36"" x 32"").

Used for Hegner Multicut scrollsaw and extraction installations to connect a Multicut to a dust extraction system for optimum dust removal.

Contents: LH Turning Tool 12mm Shank RH Turning Tool 12mm Shank Pack of 10 Inserts for LH/RH Turning Tools Parting Off Tool 12mm Shank with 10 Inserts External Threading Tool 12mm Shank with 10 Inserts Boring Bar 8mm Shank with 10 Inserts 5mm Centre Drill 2 Stub Drills (5mm & 10mm) 4 Turret Bushes (2 x 5mm, 8mm & 10mm)

These switches can be mounted conveniently as foot / knee / palm switches and wired into the machine by a competent electrician. • Ingress protection to Ip67 • 1 N/O, 1 N/C contacts (10A) • 5 x PG13 cable entries (1 threaded) • IEC418 tamperproof, UL and CSA approved Dimensions: 94mm x 94mm

Programmable spindle speeds and feedrates make the Turn 270 Pro ideal for cutting a range of resistant materials such as wax, plastic, acrylic, free cutting alloys, aluminum and steel. THE TURN 270 PRO COMES AS STANDARD WITH: • VR CNC Turning Operating Software (PC not included) • QuickTURN 2D Design Software (1 seat) • Quick Change Toolpost and Holder • Manual Self Centring 100mm 3 Jaw Chuck • Installation and Instruction Manuals • USB Connection

• Machine Type - Light /Bench or Pedestal (dedicated to machine make) • Method of attachment - Clips to back pillar • Positive Manual latch or interlock • Side opening • Construction - Mild steel with 4 mm polycarbonate vizor • Operation - Remains stationary allowing depth stop collar and chuck to pass through length adjustable vizor

These holesaws cut perfect holes in a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills. Supplied in a sturdy case for safe and secure storage. Contains: 12 x Varipitch Holesaws: 16, 20, 22, 25, 32, 35, 38, 44, 51, 64, 70, and 76mm. 1 x 3/8in Arbor (14-30mm). 1 x 7/16in Arbor (32-152mm). 1 x Arbor Adaptor. 1 x 300mm Extension Bar. 1 x Aluminium Case.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (6tpi) 6tpi - skip teeth & are best for cutting timber

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 6mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 9.5mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• Machine Type - Light/ Bench or Pedestal • Method of attachment - Side fixing or clips to back pillar • Positive Manual latch or interlocked • Side opening • Construction - Moulded 5mm polycarbonate body, with 4 mm polycarbonate vizor, adjustable to suit machine depth stop bracket • Operation - Remains stationary allowing depth stop collar and chuck to pass through length adjustable vizor

• Machine Type - Light to medium centre lathes • Method of attachment - Secures to face or top of lathe headstock • Manually adjusted to cover work area. Interlocked • Construction L6 - Cast aluminium and 4 mm polycarbonate visors • Construction L12 & L18 - Mild steel, P.V.C. skirt, 6.6 nylon pivot bushes and 4mm polycarbonate visors • Operation - Hinges to allow access to chuck and work area

315mm Dia, 30mm bore. For accurate sizing and trimming timber and manmade boards. Supplied with standard pinholes including Sedgwick and Scheppach.

315mm Dia, 30mm bore, 14mm pinhole. General purpose giving superior finish for both ripping and crosscutting applications. Supplied with standard pinholes including Sedgwick and Scheppach.

A smart easycare apron supplied in a range of colours without pockets. 100% cotton Size: 35"" x 24''

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3580 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

Red 2.85mm PLA 3D Printer Filament High quality 3D printer filament suitable for any Fused Filament Fabrication 3D printer that supports third party material.

Pack of 4 x Virtuoso HD Standard Cartridges: 1 x Cyan 29ml 1 x Yellow 29ml 1 x Magenta 29ml 1 x Black 42ml

Low cost momentary (non-locking) action panel mounting push to make switches. Supplied with fixing nut & washer 7mm cut out. External Diameter:10mm External Length / Height:28mm

Evo-Stik rapid set syringe application. 25ml.

Great roundness and consistency, PLA is Poly-Lactic-Acid, a biodegradable polymer that has a low melting point. It is an amazing material to print with and you can print at very high speeds when using this material.Ultimaker filaments have endlessly been tested to ensure they are up to the job: only the best make the grade. Prints come as intended time and time again.Ultimaker PLA is really easy to print with, it's reliable, gives good surface quality and it's made from renewable sources, so it's biodegradable too. It also works perfectly with Cura material profiles. • If you want to easily achieve high resolution prints • Printing concept models and prototypes when aesthetics and fine details are key • When you're casting metal parts through lost PLA casting • It's perfect for printing in education or in the office, thanks to low ultrafine particle emissions • A heated bed isn't necessary, it works with glue and blue tape as well • PLA isn't suitable for medium temperature applications (50°C +) or long term outdoor usage. ABS is a better material for high temperature applications and CPE for outdoor usage.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Twin-thread silver zinc-plated countersink PZD screws. Sizes: 5/8"" x 4, 3/4"" x 4, 1"" x 6, 1-1/4"" x 6, 1"" x 8, 1-1/4"" x 8, 1-1/2"" x 8, 1-1/2"" x 10, 2"" x 10, 2-1/2"" x 10, 3"" x 10. 780pce (approx).

Pan head self-tapping Pozidriv screws. Sizes: 3/8"" x 6, 1/2"" x 6, 3/4"" x 6, 5/8"" x 8, 3/4"" x 8, 1"" x 8, 1 1/4"" x 8, 1/2"" x 10, 3/4"" x 10, 1"" x 10 and 1 1/4"" x 10.

Specially made for dowel joints, the flutes allow air to escape and the glue to flow evenly. Specifications: Diameter - 6mm Length - 30mm

• Perfect way to get started with programming and hardware interaction • No soldering required • All parts are included to build 6 projects • Small prototype breadboard included • Projects: Dice, Buzzer, Theremin, Miniature Steady Hand Game, Fruit Keyboard, Traffic Lights Kit contains: 1 x micro:bit, 1 x piezo buzzer, 1 x 170 pin breadboard, 1 x 10mm red LED, 1 x 10mm yellow LED, 1 x 10mm green LED, 1 x battery case with AAA batteries, 1 x set of crocodile clip wires and 0.5mm micro USB cable