Burettes & Pipettes

• Complies with ISO 648 and DIN 12691 • Calibrated for delivery • Markings in permanent amber stain • Class AS with +5s waiting time • Manufactured from soda-lime glass with robust tooled jets

One mark bulb pipettes for dispensing set volume of liquid. Accuracy 0.2% and manufactured to BS1583.

One mark bulb pipettes for dispensing set volume of liquid. Accuracy 0.2% and manufactured to BS1583.

One mark bulb pipettes for dispensing set volume of liquid. Accuracy 0.2% and manufactured to BS1583.

One mark bulb pipettes for dispensing set volume of liquid. Accuracy 0.2% and manufactured to BS1583.

High-quality, class borosilicate glass pipettes, bulb form, with blue graduations.

High-quality, class borosilicate glass pipettes, bulb form, with blue graduations.

High-quality, class borosilicate glass pipettes, bulb form, with blue graduations.

High-quality, class borosilicate glass pipettes, bulb form, with blue graduations.

Soda Glass. Class B. To BS700. Calibrated to deliver from zero at the top to any graduation mark (like burette).

Soda Glass. Class B. To BS700. Calibrated to deliver from zero at the top to any graduation mark (like burette).

Soda Glass. Class B. To BS700. Calibrated to deliver from zero at the top to any graduation mark (like burette).

Soda Glass. Class B. To BS700. Calibrated to deliver from zero at the top to any graduation mark (like burette).

Soda Glass. Class B. To BS700. Calibrated to deliver from zero at the top to any graduation mark (like burette).

Soda Glass. Class B. To BS700. Calibrated to deliver from any graduation mark to empty. Designed for educational use.

Soda Glass. Class B. To BS700. Calibrated to deliver from any graduation mark to empty. Designed for educational use.

Soda Glass. Class B. To BS700. Calibrated to deliver from any graduation mark to empty. Designed for educational use.

Soda Glass. Class B. To BS700. Calibrated to deliver from any graduation mark to empty. Designed for educational use.

Soda Glass. Class B. To BS700. Calibrated to deliver from any graduation mark to empty. Designed for educational use.

Graduated plastic pipette. LDPE.

Graduated plastic pipette. LDPE.

Pasteur pipette, graduated, plastic, sterile. Supplied in packs of 20.

This one-handed design is the simplest to use safety pipette filler. Manufactured in natural orange rubber, is operated by single hand use with only two operating points and evacuates via the automatic valve. This standard model accommodates all pipettes and has the useful ability to allow cleaning inside the bulb, by removing the patented valve and rinsing out.

The three control pads are within finger reach without removing the palm of the hand from the bulb. Aspiration and dispensing can be achieved quickly and with great accuracy. Ideal for pipetting noxious or offensive liquids and is resistant to attack from most chemicals.

The three control pads are within finger reach without removing the palm of the hand from the bulb. Aspiration and dispensing can be achieved quickly and with great accuracy. Ideal for pipetting noxious or offensive liquids and is resistant to attack from most chemicals.

A moulded rubber bulb with glass ball valves which can be controlled by finger pressure. There are no metal parts to corrode and the filler can be used with all liquids except those that attack rubber.

Pipette Filler, 'Pump-Type', 2 mL.

Pipette Filler, 'Pump-Type', 10 mL.

Pipette Filler, 'Pump-Type', 25 mL.

This useful washing/rinsing system allows pipettes and burettes to be automatically rinsed when connected to a tap and drain outlet. Particularly useful where unpleasant or hazardous liquids have been used, the apparatus holds pipettes and burettes up to 600 mm in length. For convenience and flexibility, the washing/rinsing system is available as separate components. 1. The polyethylene rinser/washer fills via the spray nozzle on the top rim. Contaminated water will syphon out totally, once the syphon point at the top of the rinser has been reached via the large diameter drain situated at the lowest point, before refilling automatically. 2. During washing the pipettes/burettes are housed in a specially designed basket, which minimise breakages as it buffers the glassware tips against the soft polyethylene base. 3. A soaking jar is available, which will hold pipette/burette basket, to allow the glassware to soak before rinsing. Low water flow rate is NOT problem, but it is better to adjust the flow for cycle of about 90 seconds.

This useful washing/rinsing system allows pipettes and burettes to be automatically rinsed when connected to a tap and drain outlet. Particularly useful where unpleasant or hazardous liquids have been used, the apparatus holds pipettes and burettes up to 600 mm in length. For convenience and flexibility, the washing/rinsing system is available as separate components. 1. The polyethylene rinser/washer fills via the spray nozzle on the top rim. Contaminated water will syphon out totally, once the syphon point at the top of the rinser has been reached via the large diameter drain situated at the lowest point, before refilling automatically. 2. During washing the pipettes/burettes are housed in a specially designed basket, which minimise breakages as it buffers the glassware tips against the soft polyethylene base. 3. A soaking jar is available, which will hold pipette/burette basket, to allow the glassware to soak before rinsing. Low water flow rate is NOT problem, but it is better to adjust the flow for cycle of about 90 seconds.

Soaking jar for BU120110 or BU120115.

Basket for BU120110 or BU120115.

Basket for BU120110 or BU120115.

Polypropylene. To hold 10 pipettes up to 15 mm diameter and further 18 up to 10 mm diameter vertically.

For dropping pipettes.

For dropping pipettes.

For dropping pipettes.

An economical semi-automatic bottle top dispenser with replaceable dispensing cartridges and valves. Suitable for use with aqueous solutions, alkalis, dilute acids and polar solvents. The ""BibbyPet"" has 45 mm thread and is supplied complete with 32 mm and 40 mm adapters

Economical clear acrylic burette, white graduations. TPX/Teflon stopcock.

Economical clear acrylic burette, white graduations. TPX/Teflon stopcock.

A clamp consisting of two plastic coated spring clips mounted 50 mm apart on stainless steel plate with rod. Dimensions 150 x 8 mm (L x Diameter).

Economical die cast metal burette holder with integral boss. Simple clamping action for use with one burette.

Economical die cast metal burette holder with integral boss. Simple clamping action for use with two burettes.

Strong burette holder with alloy cast jaws with plastic ends to clamp single burette. Suitable for burettes up to 100 mL.

Hardwood complete with base and rod. All parts are interchangeable. Burette clamps are cork lined.

A one piece clamp moulded from acetal homopolymer to hold a 50 mL burette. Suitable for 12 mm diameter retort rods only.

Polypropylene.

A pattern unit comprising high strength alloy casting with plastic jaws. Suitable for all burettes up to 100 mL capacity.

Glass stopcock Class A with blue graduations.