Dust Extraction

The TSCS (ATEX compliant) alleviates the need for a Run-Off table behind the saw (a legal requirement) and maximises the floor space. The Extractor is simple to install and is fitted with an ATEX Compliant Explosion Relief Panel for use with fine dusts dependant upon the requirements of the local authority or the HSE. A range of Circular Saw Extraction Kits are available for installation by Technology Supplies engineers. Please specify saw model number at time of order placement if this service is required. These products require specialist installation & training. Please contact us for further information.

The TSCS alleviates the need for a Run-Off table behind the saw (a legal requirement) and maximises the floor space. The Extractor is simple to install and a range of Circular Saw Extraction Kits are available for installation by Technology Supplies engineers. Please specify saw model number at time of order placement if this service is required. These products require specialist installation & training. Please contact us for further information.

The TSUB may also be used for other similar applications including portable benches and small individual machines. The TSUB has exceptionally low noise characteristics for use within the classroom and is designed for use with fi ne dusts. Warm air is returned to the classroom being sympathetic to environmental issues. A complete installation service is available by our engineers. Inlet sizes: 1 x 80mm & 1 x 63mm diameter ports, one either side OR 2 x 63mm diameter ports, one either side. Please specify inlet port diameters and locations (LHS/RHS) at time of order placement. These products require specialist installation & training. Please contact us for further information.

The TSFL has exceptionally low noise characteristics for use within the classroom and is designed for use with fine dusts. Warm air is returned to the classroom being sympathetic to environmental issues. The Top Extraction Kit is available for installation by our engineers. Inlet sizes (left and/or right side: 1 x 100mm & 1 x 80mm diameter ports OR 2 x 80mm diameter ports OR 1 x 120mm port on one side only. Please specify inlet port diameters and saw model number at time of order placement. These products require specialist installation & training. Please contact us for further information. Airflow: Approx. 600m3/hr at 1000 pascals.

The TSFLA has exceptionally low noise characteristics for use within the classroom and is designed for use with fine dusts. Warm air is returned to the classroom being sympathetic to environmental issues. A certified explosion vent relief panel is supplied to meet local authority or HSE requirements. The Top Extraction Kit is available from Technology Supplies for installation by our engineers. Please specify inlet port diameters and saw model number at time of order placement. These products require specialist installation & training. Please contact us for further information.

The TSHS has a primary dust separator in the form of a cyclone, which removes the bulk of the extracted dust, leaving relatively clean air to pass through a secondary cartridge fi lter, thus extending fi lter life. The TSHS has exceptionally low noise characteristics for use within the classroom and is designed for use with fi ne dusts. Warm air is returned to the classroom being sympathetic to environmental issues. A complete installation service is available from our engineers. These products require specialist installation & training. Please contact us for further information.

The TSPL may also be used for other similar applications and offers the designer a realisticn alternative to a Centralised Ducted System. The TSPL has exceptionally low noise characteristics for use within the classroom and is designed for use with coarse dusts, hence the large collection bin capacity and the comparatively low footprint area of the machine. Warm air is returned to the classroom being sympathetic to environmental issues. Extraction Kits for Planers and Wood Lathes are available from Technology Supplies for installation by our engineers. Please specify inlet port diameters, locations (LHS/RHS) and lathe/planer model at time of order placement. These products require specialist installation & training. Please contact us for further information.

The TSPL may also be used for other similar applications and offers the designer a realisticn alternative to a Centralised Ducted System. The TSPL has exceptionally low noise characteristics for use within the classroom and is designed for use with coarse dusts, hence the large collection bin capacity and the comparatively low footprint area of the machine. Warm air is returned to the classroom being sympathetic to environmental issues. A cerfified explosion vent relief panel is supplied if required to meet local authority or HSE requirements. Extraction Kits for Planers and Wood Lathes are available from Technology Supplies for installation by our engineers. Please specify inlet port diameters, locations (LHS/RHS) and lathe/planer model at time of order placement. These products require specialist installation & training. Please contact us for further information.

The Hegner MAXIMUS 13E dust extractor is extremely quiet, only 62 dB (A), has enormous suction power with 290 mbar vacuum at 60 l / sec., Large operating range 7.5 m power cable and 2.5 m suction hose, rotary unions on the suction hose for non-return working, power regulation for optimal adjustment to every covering, dust-free dirt removal through lockable fleece filter bag, upright working by foot control, switch and parking position, suction harness, working with fleece filter basket also possible without fleece filter bag, suitable for allergy sufferers by optional HEPA H12 filter cassette, with socket and automatic switch-on for power tool - max. 2000 Watt. Accessories supplied: 1 x suction hose 2.5m with handpiece 2 x extension tubes 1 x floor nozzle 1 x upholstery nozzle 1 x connection piece 36 mm 1 x fleece filter basket 1 x fleece filter bag dust class M. NOTE - Suitable for use with a single Hegner fretsaw

Pre-Filter for the BOFA AD-400 extractor.

Wood lathe extraction kit containing everything required to connect a wood lathe to our extraction system including scoop hood, frame assembly, ducting and fixings.

A range of accessories for use with any extractor. Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc. BZP Size 5 Adjustment . 90 - 120mm Adjustment. 3.1/2 - 4.3/4in

A cartridge filter for the Woodvac TS100.

Filter bags for WV150 Pack of 6

Pack of 5 standard poly waste bags. Size 915mm x 812mm (36"" x 32"").

Used for Hegner Multicut scrollsaw and extraction installations to connect a Multicut to a dust extraction system for optimum dust removal.

Replacement filter for the TSFL dust extractor.

Replacement filter set for the TSCS dust extractor.

Replacement filter (spring type set) for the TSUB dust extractor.

Replacement main filter for the TSMB dust extractor.

Replacement after filter for the TSMB dust extractor.

Replacement filter for the TSPL dust extractor.

Replacement filter for the TSHS dust extractor.

Includes filter moitoring system to help identify when filters need replacing. Large dust collection tray and filter shaking mechanism.

Suitable for small power tools. • Single motor • Two stage filtration • Supplied with hose

Clear Flexi Hose 102mm 3m