General Labware

Manufactured in nickel plated zinc alloy. Accepts tubing up to 30 mm diameter.

Spare wheel for GL0882, glass tubing cutter.

Epoxy-coated steel wire dual panel draining rack, it can be free standing or used as two wall mounted racks. Contains 122 pegs each peg is 70 mm long arranged as eight rows of ten pegs four each side) and six rows of seven pegs three each side). Dimensions 560 x 580 x 330 mm.

An easy-to-use meter that measures temperature and light. High accuracy, fast response Colour LCD with backlight Max/min recording function Auto power-off (can be disabled) Temperature -20 70°C Light 200 klux Takes 3 x AAA batteries

Iron wire with ceramic centre. Each pack has batch number, and UKAS asbestos certificate is available online. Supplied in packs of 10

Blue epoxy-coated, steel wire test tube rack, resistant to most solvents, weak acids and bases. Will withstand autoclaving up to 121°C

Blue epoxy-coated, steel wire test tube rack, resistant to most solvents, weak acids and bases. Will withstand autoclaving up to 121°C

Blue epoxy-coated, steel wire test tube rack, resistant to most solvents, weak acids and bases. Will withstand autoclaving up to 121°C

Borosilicate glass, with stopcock and disc

Recommended by CLEAPSS' guide GL240, a high-quality burner with refillable gas tank and thumb-operated electric ignition. It provides stable, controllable flame. The housing stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 70 minutes small flame on full tank • Can be refilled with GA130510 • Rekrow model RK4601 • Flame temperature up to 1,250 °C • Output 0.75 kW • 30 g tank capacity • Consumption: 56 g/hour • Base diameter: 79 mm • Width: 127 mm • Height: 75 mm • Weight: 410 g (without fuel) • CE marked

Recommended by CLEAPSS' guide GL240, a high-quality burner with refillable gas tank and thumb-operated electric ignition. It provides stable, controllable flame. The housing stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 70 minutes small flame on full tank • Can be refilled with GA130510 • Rekrow model RK4601 • Flame temperature up to 1,250 °C • Output 0.75 kW • 30 g tank capacity • Consumption: 56 g/hour • Base diameter: 79 mm • Width: 127 mm • Height: 75 mm • Weight: 410 g (without fuel) • CE marked

Recommended by CLEAPSS' guide GL240, a high-quality portable laboratory burner, with refillable gas tank and thumb-operated electric ignition. It provides an adjustable flame, similar to a Bunsen burner. The tank stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 80 minutes small flame on full tank • Can be refilled with GA130510 • Flame temperature up to 1,250 °C • 30 g tank capacity • Width: 115 mm • Height: 96 mm • Weight: 430 g (without fuel)

Recommended by CLEAPSS' guide GL240, a high-quality portable laboratory burner, with refillable gas tank and thumb-operated electric ignition. It provides an adjustable flame, similar to a Bunsen burner. The tank stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 80 minutes small flame on full tank • Can be refilled with GA130510 • Flame temperature up to 1,250 °C • 30 g tank capacity • Width: 115 mm • Height: 96 mm • Weight: 430 g (without fuel)

This tight fitting, quick disconnector is useful for joining tubing which may need to be quickly uncoupled. Made from Polyethylene.

Polypropylene connectors with rigid arms and ridges for better grip. Outer diameter 8 mm. Supplied in a pack of 5.

Simax borosilicate glass. Shoulder height is 50 mm below the height in the table. 29/32 socket.

Simax borosilicate glass. Shoulder height is 50 mm below the height in the table. 29/32 socket.

Simax borosilicate glass.

Polythene, to take 2.5 litre Winchester Bottles. Dimensions: 30 cm high, 16 cm diameter.

This burner is manufactured with a pressed die-cast base (80 mm diameter) and rifled gas inlet tube. The nickel-plated burner tube comes with a rotatable air regulator. Chimney diameter 11 mm, height 120 mm, weight 260 g.

This burner is manufactured with a pressed die-cast base (80 mm diameter) and rifled gas inlet tube. The nickel-plated burner tube comes with a rotatable air regulator. Chimney diameter 11 mm, height 120 mm, weight 260 g.

This burner is manufactured with a pressed die-cast base (80 mm diameter) and rifled gas inlet tube. The nickel-plated burner tube comes with a rotatable air regulator.Chimney diameter 13 mm, height 142 mm, weight 280 g.

This burner is manufactured with a pressed die-cast base (80 mm diameter) and rifled gas inlet tube. The nickel-plated burner tube comes with a rotatable air regulator.Chimney diameter 13 mm, height 142 mm, weight 280 g.

This burner is manufactured with a pressed die-cast base (80 mm diameter) and rifled gas inlet tube. The nickel-plated burner tube comes with a rotatable air regulator. Chimney diameter 13 mm, height 142 mm, weight 280 g.

This burner is manufactured with a pressed die-cast base (80 mm diameter) and rifled gas inlet tube. The nickel-plated burner tube comes with a rotatable air regulator. Chimney diameter 13 mm, height 142 mm, weight 280 g.

Pressed steel powder coated base.

Stove enamelled cast base with steel tube. Air regulator and rifled gas inlet tube. Overall height 124 mm, chimney OD 11 mm, Inlet OD 9.25 mm, Outlet ID 7 mm.

Stove enamelled cast base with steel tube. Air regulator and rifled gas inlet tube. Overall height 145 mm, chimney OD 13 mm, Inlet OD 9.25 mm, Outlet ID 9 mm.

Stove enamelled cast base with steel tube. Air regulator and rifled gas inlet tube. Overall height 145 mm, chimney OD 13 mm, Inlet OD 9.25 mm, Outlet ID 9 mm.

The Becelec Electric Burner offers unique replacement option to conventional gas Bunsen burners. The high power heater combined with reflective internal stainless steel bowl produces concentrated stream of heat comparable with that of existing gas-powered Bunsen burners. Dimensions (L x W x H): 310 x 200 x 110 mm Flame gel to create flame is available separately. Features: Power: 500 W • Temperature Range: 37 to 720 °C Weight: 1.7 kg Diameter of heating area: 130 mm Set also contains: Stainless Steel Plate, Support Rod, Boss Head, Clamp.

Comprising of steel holder with adjustable shielded flint and striking plate. Supplied with one flint.

Spare flints for GA08650.

Micro burner, Natural gas.

A simple, metal stand for enabling safe experimentation. Supplied in a pack of 5.

Ideal for convection in air apparatus or as an indicator for fume cupboard operation. Supplied in a pack of 25.

Glass body with wick, screw on top and push on cap.

Spare wick for spirit burners. 4 mm diameter, 1 m length.

Spare wick for spirit burners. 7 mm diameter, 125 mm length.

More robust spirit burner, made from stainless steel, with wick adjustment and cap. 100 mL capacity, uses 12.5 mm wick.

Spare wick, 12.5 diameter, 80 mm long. Pack of 10.

Acetal resin, sterilisable, acid and alkali resistant. Hinged clip. Takes tubing up to 14 mm o.d. Supplied in packs of 5.

Compressed for supporting flasks etc.

Compressed for supporting flasks etc.

Dimensions 300 x 300 x 5 mm (L x W x D).

Conical shape. Suitable for use as simple, low thermal calorimeter. Supplied in pack of 100.

Clear, lightweight plastic drinking cups. Not suitable for use with vending machines or boiling water. Supplied in a pack of 50.

A stackable, clear, high impact polystyrene cabinet with an airtight door with foam rubber gasket. Supplied with sealed jar of silica gel. Dimensions (L x W x H): Internal 210 x 180 x 130 mm, External 225 x 200 x 168 mm. Door opening 168 x 110 mm.

Borosilicate glass. With knob lid and disc. Internal dimension 90 x 115 mm (H x dia.) inside lid/top of base.

Borosilicate glass. With knob lid and disc. Internal dimension 160 x 220 mm (H x dia.) inside lid/top of base.

Nuffield', Stainless steel. 200 mm length. Spoon diameter approx. 5 mm.