Search
All Categories
    Menu Close

    Enamelling & Pottery

    View as Grid List
    Sort by
    Display per page
    910-205.jpg

    Kiln Front Loading and MP3300-2 Controller

    Firing capacity: 135 litres (4.77 cu ft). Maximum Temperature: 1320°C Chamber dimensions mm: 420 wide x 480 deep x 680 high External dimensions mm:;730 wide x 940 deep x 1560 high Weight: 270kg Power: 7.5 kW Supply required: Single Phase-40 amps or 3 phase-15amps per phase Installation Note: Please be aware that although we need to specify a 16 Amp three phase supply, the commando socket needs to be a 32amp socket as it is dimensionally bigger. The 910-007 plug is five pin (ThreePhaseNeutral+Earth).
    24767.50 AED
    910-240.jpg

    Pugmill G49E

    The Gladstone E range of pugmills has been specifically designed for the studio and classroom environment. These machines being both compact and lightweight make them easily transportable. The G49E is fitted with a hopper safety grid and thermal overload safety switch as standard. Available in single or 3 phase. Specification: Extrusion outlet: 500mm dia Clay output: 190 - 200kg of clay per hour (approx) Dimensions (HxWxD) : 470 x 280 x 800mm Weight: 36.5kg
    19256.58 AED
    910-106.jpg

    Key Ring Snake Leash

    Nickel plated. Pk/50
    83.00 AED
    950-740.jpg

    Key Rings 25mm Diameter

    High-quality nickel-plated steel split rings. Packs of 100.
    67.19 AED
    910-257.jpg

    Potters Wheel Cowley Double Drive

    • Cone driven • Low maintenance wheel • Reliable mechanism • Ideal for large pots • Forward and reverse switch • 1/2hp motor • Aluminium wheelhead • Weight 40Kg
    11593.47 AED
    910-270.jpg

    ENA110 Enamel Kiln

    Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1000°C External dimensions HxWxD: 250 x 200 x 210mm. Internal dimensions HxWxD: 130 x 120 x 70mm. 0.9KW Weight: 4.5kg Supplied with a batt (ceramic shelf)
    3670.29 AED
    910-243-1-en_GB.jpg

    Clay Bin Fibreglass

    Fibre glass clay bin. Holds up to 250kg of clay.
    4273.44 AED
    910-247.jpg

    Metal Damp Cabinet

    Keep your clay stored safely and usable for longer. Height - 1220mm Width - 920mm Depth - 640mm
    7575.36 AED
    910-278.jpg

    ST221/2 Kiln Temperature Programmer

    • Easy to retro-fit to kilns without controls • Ideal for enamelling & jewellery • Single program • Heats at full power then soaks • Soak temperature & soak time can be reviewed or altered while firing • Delayed start facility • Power failure recovery • Selectable thermocouple types • Extensive kiln safety monitoring with alarm buzzer
    3801.51 AED
    910-287.jpg

    Bailey Potters Wheel

    The Gladstone Bailey wheel offers the studio and professional potter a wheel of unparalleled performance and versatility in a compact and user friendly design. The Bailey wheel has been designed to complement a European style of throwing with the wheel head set at a greater height than most wheels of this style allowing a more comfortable throwing position. The wheel powered by a super smooth 1/2 Hp drive that is controlled by a computer enhanced VF drive that due to its unique design can generate up to the peak equivalent of 1 Hp under heavy loads this enables the wheel to give constant smooth power throughout the speed range and is extremely quiet in operation. This wheel meets all current CE requirements and BSEN standards for electrical and mechanical safety. Technical Data Motor 0.37Kw (1/2Hp) AC industrial constant rated motor Operation Remote pedal speed control operation Speed 0 - 280 rpm Wheel Head 12"" dia Aluminium Alloy Splash Tray Large Capacity Moulded Plastic Width 470 mm approximately Height 680 mm approximately Length 630 mm approximately Weight approximately 37 Kgs Centering Weight 25 Kg of Clay Construction of Cabinet Precision laser steel chassis with powder coated finish
    14149.95 AED
    910-272.jpg

    ENA150 Enamel Kiln

    Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 380 x 260 x 300mm Internal dimensions HxWxD: 200 x 160 x 90mm 1.2kW Weight: 8kg Supplied with a batt (ceramic shelf) We strongly recommend the enamelling kilns are used with a controller/programmer to prevent over-firing.
    5863.14 AED
    910-273.jpg

    ENA180 Enamel Kiln

    Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 410 x 300 x 320mm Internal dimensions HxWxD: 230 x 190 x 120mm 2KW Weight: 14.5kg Supplied with a batt (ceramic shelf)
    7127.94 AED
    910-006.jpg

    Front Loader Auto Damper & Heat Lock

    Front Loader Auto Damper & Heat Lock
    14363.39 AED
    910-238-1-en_GB.jpg

    Kiln Furniture Set P5841

    Kiln furniture set (P5841)
    1801.55 AED
    910-242.jpg

    Wedging Bench

    Wedging bench with a soft wood frame sanded and polished to a high finish and a 20 mm Formica top. HxWxD: 760mm x 1200mm x 860mm Approximate weight: 50kg
    9146.09 AED
    910-208-1-en_GB.jpg

    Pugmill G50E Compact 75mm Single Phase

    Designed to meet the needs of the busy studio where both space and finance is limited. The compact Pugmill has an exceptional output for a machine of this size. An electronic overload starter and stop button is fitted as standard.
    17862.20 AED
    910-236.jpg

    Kiln P5941 with MP3300 - 2 Controller

    • Type R thermocouples fitted as standard on UK kilns • Adjustable clasp door locks fitted • Stainlesssteel surround • Brick to brick door seal • All kilns are fitted with a Harting socket for easy controller connection • Mains power indicator • Wired for singleor three phase connection • Roof and door vent asstandard for ventingof the kiln during firing and to aid cooling • Energy efficient • Furniture set available
    27125.00 AED
    560-123.jpg

    Waxed Thonging Black 100m

    Reel of 100m black waxed thonging
    112.25 AED
    950-742.jpg

    Key rings 30mm Diameter

    High-quality nickel-plated steel split rings. Packs of 100.
    83.00 AED
    950-741.jpg

    Key Rings 20mm Diameter

    High-quality nickel-plated steel split rings. Packs of 100.
    55.34 AED
    Refine