Tools

Robust cast-iron frame with steel threaded bar. Tommy bar handle for easy tightening. Swivel shoe allows for clamping irregular-shaped objects. Copper-plated thread prevents weld spatter from sticking. Reinforced shoulders provide greater strength. Corrosion-resistant frame finish.* *QGT - Quality Guaranteed Tools. Tools from a variety of sources which offer exceptional value for money.

Made from U section, extruded aluminium with cast head and foot. Spring-loaded rapid adjustment mechanism sets foot to correct position on bar. Deep-cut Acme thread enables final tightening and application of clamping pressure.

Wood chisel with a fully ground forged steel blade. Fitted with a polypropylene handle in carver style for comfort and durability. Shock absorbing washer between handle and blade. Comes with blade guard for safety. Set of 4 chisels 6mm, 12mm, 18mm, & 25mm. Type. Bevel Edge.

Bastard Cut 250mm

Smooth Cut 250mm

Bastard Cut 200mm

Second Cut 200mm

""A virtually unbreakable blade ideal for all material types, including sheet metals and hard steels. These blades are particularly useful when working in restricted access areas due to their thinness and flexibility, or on site where the workpiece cannot easily be secured

Quality heat treated steel with accurately set and shaped teeth. Supplied in standard 165mm size to fit most coping saws. 24TPI and pinned ends. Pack of 10

Quality heat treated steel with accurately set and shaped teeth. Supplied in standard 165mm size to fit most coping saws. 14TPI and pinned ends. Pack of 10.

Stanley 018 Interlock snap-off 18mm blade. These knives provide safer operation because the blade is clamped firmly in place. It can be locked in the extended or retracted positions. They accept standard craft knife blades.

QGT hammers have drop forged, hardened tool steel heads and lacquered ash handles. They comply with BS876.

For delicate, precision cutting, trimming and stripping. Shaft 120mm x 8mm dia.

Stanley Throwaway Knife Pack of 50

Stanley Knife Blades 1991 Pack of 5

Second Cut 250mm

Smooth Cut 200mm

Quick change bar clamp with a revolutionary design. A trigger releases the pressure instantly and a quickchange jaw converts the clamp to a spreader in seconds. Three sizes are available. 60mm Bite Depth

Marples 2inch capacity.

Robust cast-iron frame with steel threaded bar. Tommy bar handle for easy tightening. Swivel shoe allows for clamping irregular-shaped objects. Copper-plated thread prevents weld spatter from sticking. Reinforced shoulders provide greater strength. Corrosion-resistant frame finish.* *QGT - Quality Guaranteed Tools. Tools from a variety of sources which offer exceptional value for money.

Quick change bar clamp with a revolutionary design. Light weight, high tech clamps with a fast action grip operation allowing pressure to be applied precisely with one hand. A trigger releases the pressure instantly and a quickchange jaw converts the clamp to a spreader in seconds. Three sizes are available.

Quality professional sash clamp with fine thread and bend resistant bar.

The Faithfull G Clamp is built to resist distortion, the ribbed frame is manufactured from malleable SG iron making these clamps virtually unbreakable. The spindle has acme cut threads to provide a smooth operation and maximum clamping pressure. The frames have a powder coated finish for increased resistance to corrosion making them suitable for a wide variety of metalworking and woodworking applications. Specification: Capacity: 255mm (10"") Throat Depth: 102mm (4"")

Ideal wood chisels for schools and educational establishements. • Heat treated blades for maximised safety and strength • Soft feel ergonomic handle • Chrome vanadium steel • Built in striking cap

Fixed joint Jenny calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg.

From high grade steel. QGT

Manufactured from hardened stainless steel, this three function electronic digital caliper provides precision readings through a clear liquid crystal display. Its many features include a fine adjustment roller which allows precise measurements to be taken quickly and easily. The digital section button enables readings to be displayed in either metric, imperial (decimal) or imperial (fractional) format. The four-way measurement function provides a choice of readings in external, internal,depth and step modes. The strong plastic storage case enables the caliper to be kept in a dust and damp free environment, protected from direct sunlight and high temperatures. Capacity 150mm (6 in) Graduations: 0.01 mm, 0.0005 in and 1/64in increments

From high grade steel. QGT

Chrome vanadium round blade flared tip and unique two-plastic handle with superior grip and torque characteristics.

Chrome vanadium steel. Metric and imperial long series hex keys. Includes 12 x long arm metric & 13 x long arm imperial

Ratchet screwdriver handle, asst slotted, Phillips & Pozi bits, magnetic bit holder and 8 small sockets in a moulded display case.

Chrome vanadium round blade flared tip and unique two-plastic handle with superior grip and torque characteristics.

Made in Sheffield. An essential tool for all woodworkers. This Footprint Square is made from Walnut. Traditionally used for marking right angles and checking squareness between joints. The hardened steel blade has been chemically blued to prevent corrosion and provide a longer working life. The hardened steel blade is attached to the stock by three hard wearing brass rivets. To provide accuracy with the right angle the Walnut stock has been fitted with a thin brass plate, on the angle side of the stock. This maintains the right angle and also prolongs the life of the square.

Made in Sheffield The simple Bevel never grows old and is constantly in use for checking angles, marking joints or marking across boards. The Footprint Bevel stock is made from Walnut and the ends are protected by brass fittings to provide extra durability. The metal blade is parallel and held with a wing nut for easy adjustment. The blade has been chemically blued to prevent corrosion and provide a longer working life.

Stanley Bradawl with hardened, tempered and sharpened flat blade. Nickel Plated. The square bladed footprint bradawl has a beechwood handle and brass ferrule with a square section that tapers to a fine point.

Quality brass backed saw, 200mm. With beech handle. Made in Sheffield.

Spare blade for hand mitre saw 14 tpi (720-290)

This single pinion hand drill has an aluminium gear wheel. It has a 3-jaw self centring chuck 5/16in (8mm), a black japanned finish and is fitted with comfortable plastic handles.

A general purpose double pinion drill with a plastic back handle, with easy-grip feature and plated three jaw chuck. Chuck capacity 8mm - 3/8inch.

Forged from chrome alloy steel, jaws fully hardened and tempered polished and chrome plated.

GABRO guillotine notchers are suitable for bench and stand mounting. They completely eliminate the distortion of material associated with conventional guillotines. They do this by progressively blanking out a thin strip of material, leaving both sections entirely undistorted and free from sharp burrs and edges. Sheets of unlimited size can be cut and notched up to the maximum thickness rating for each machine. All machines are supplied with an angle guide/ backstop, line guide, side fence and nibbling steady. NOTE: Stand not included.

Chrome Vanadium. Both ends fit the same size nut, one is openended, the other ring. QGT.* Sizes - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17 & 19mm.

Includes 2 spark plug sockets, reversible ratchet, speed brace, sliding T-bar, universal joint, 2 extension bars: 125mm and 250mm; 2 adaptors 1/2"" (female) x 3/8"" (female) x 1.4"" (male); 17 metric sockets 10-27mm, 15 AF sockets 3/8"", 7/16"", 15/32"", 1/2"", 9/16"", 19/32"", 5/8"", 11/16"", 3/4"", 25/32"", 13/16"", 7/8"", 15/16"", 1"" and 1 1/8"".

Spring dividers have polished natural steel finish legs made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action. The polished natural steel finish legs are made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw, which gives a smooth and precise action Spring divider 100mm (4in)

Footprint, Gilbow and QGT* snips are designed to prevent the handle ends from nipping the user.

Footprint, Gilbow and QGT* snips are designed to prevent the handle ends from nipping the user.

Machinists scribers made from hardened and ground HSS. Single ended 4.1/2 long, double ended 7.1/2 long.

DRAPER 3x100mm Centre Punch -Tip Diameter: 3mm -Square Section Striking Head -Knurled Body with Polished Ends -Manufactured From Hardened and Tempered Carbon Steel

Priory 44 Square head knurled body 4inch, 5mm tip.

This is our best seller and offers outstanding value. They are graduated on two edges in mm and figured every 10mm.