Woodworking Machinery

For Craft & Supercraft chucks.

Hegner Blade Clamp 0.5mm and Screw Used for blades Grade no.5 or smaller

Hegner Blade Clamp 0.7mm and square head screw General purpose gap width of 0.7mm - will accept ALL our blades including Machine Coping Blades.

Has a larger gap width than our standard blade clamps. The larger gap makes installing blades grade no.9 or above easier and improves clamping force

Weight 13kg Height 880mm - effective table working height for Multicut-1 1040mm, Multicut-2S/SEV 1080mm. Suitable for: Multicut-1, Multicut-2S, Multicut-SE, Multicut-QUICK. Not suitable for the Hegner Polycut-3 and Multicut-2 scrollsaws Bolts used to fix multicut to stand are incuded with the machine and also with the stand. They are 3 x M8x16mm hex head & M8 sprung washer. Height 880mm - effective table working height for Multicut 1 1040mm, Multicut 2S 1080mm. Top size (triangular 450 x 445 x 445 mm)

The standard tilting table is 226 x 278mm and indexed 135-90°. The integral dust extraction system significantly improves performance and combined with cassette collection and disposal enhances easy, convenient waste handling. Fully compliant with UK COSHH regulations, the European Machinery Directive and also with the BS4163:2014 Health and Safety in Workshops of Schools and Similar Establishments” Regulations. Supplied and fitted with a medium grade, grit belt. KEY FEATURES • Dust extraction mounted • Quick action calibrated tilting table for operating positions between 90 and 135 degrees • Adjustable protractor guide • Thumb screws for belt adjustment • Supplied with 150 x 1090mm aluminium oxide abrasive belt

The standard tilting table is 226 x 278mm and indexed 135-90°. The bench machine has dust extraction takeoff points and requires a non-latching footswitch (530-795). KEY FEATURES • Bench mounted • Quick action calibrated tilting table for operating positions between 90° and 135° • Adjustable protractor guide • Thumb screws for belt adjustment • Supplied with 15mm x 1090mm aluminium oxide abrasive belt

It has a large cast iron tilting fence for accuracy and timber support, front and rear cutterblock guards, shaw guards for rebating and features an enclosed drive mechanism. A no-volt release starter with thermal overload, key switch, footswitch and anti-kick back fingers for thicknesser are fitted as standard. KEY FEATURES • Two Knife Cutter block • Cast Iron table • Cast Iron fence • 180 x 255mm thicknessing capacity • 255mm surfacing width • Footstop and key switch included • UK Manufactured

The standard tilting table is 226 x 278mm and indexed 135-90°. The bench machine has dust extraction takeoff points and requires a non-latching footswitch (530-795). KEY FEATURES • Bench mounted • Quick action calibrated tilting table for operating positions between 90° and 135° • Adjustable protractor guide • Thumb screws for belt adjustment • Supplied with 15mm x 1090mm aluminium oxide abrasive belt

The standard tilting table is 226 x 278mm and indexed 135-90°. The integral dust extraction system significantly improves performance and combined with cassette collection and disposal enhances easy, convenient waste handling. Fully compliant with UK COSHH regulations, the European Machinery Directive and also with the BS4163:2014 Health and Safety in Workshops of Schools and Similar Establishments” Regulations. Supplied and fitted with a medium grade, grit belt. KEY FEATURES • Dust extraction mounted • Quick action calibrated tilting table for operating positions between 90 and 135 degrees • Adjustable protractor guide • Thumb screws for belt adjustment • Supplied with 150 x 1090mm aluminium oxide abrasive belt

With a cast iron table at the heart of this compact machine it is designed to offer those with limited space or budgets a real bandsaw with sensible capacity and performance, as an alternative to lightweight hobby machines. It shares the same essential build qualities as its larger cousins, strong steel frames, dynamically balanced bandwheels, cast iron tables and an induction motor. It has been designed to offer the user with space restrictions a serious machine in compact form. Key Features: • Blade Guides - Simple to set and easily adjustable • Sealed for life bearings - Require no maintenance during the life of your machine • Capacity - Large 120 mm depth of cut and 240 mm throat depth make this a compact machine capable of serious work • Strong Fence - With cam action lock for ease of use and simple tension adjustment for clamping strength (clamps at rear of table) • Table - A solid, finely ground cast iron table provides an ideal and low friction work support • Trunnion - Table tilts from 0 - 45º on a solid trunnion with easy to read scale Specification: Maximum Depth of Cut: 120mm Throat Depth: 240mm Table Size: 315 x 350 mm Table Height from Floor: 370 mm Motor Power: 1/2 hp Blade Length: 70 1/2"" Blade Width Capacity: 1/4 - 1/2"" Blade Speed: 740 M / minute Extraction Port Diameter: 58 mm (100 mm with supplied adaptor) Height: 860mm Width: 550mm Depth: 480mm Weight: 30kg

The machine can be supplied for left or right handed operation and for a small surcharge it can be supplied with the necessary parts for easy conversion in the workshop. TECHNICAL DATA • Drilling capacity in mild steel 13mm • Motor 0.25kW Single phase • Throat depth 194mm • Speed range 500-4000rpm • No. of speeds 5 • Table size 235 x 409mm • Dimensions 815 x 372 x 627mm • Weight 46Kg KEY FEATURES • Made in the UK • Bench mounted • Easy to use • Front mounted controls • Head raising mechanism

The machine can be supplied for left or right handed operation and for a small surcharge it can be supplied with the necessary parts for easy conversion in the workshop. TECHNICAL DATA • Drilling capacity in mild steel 13mm • Motor 0.25kW Single phase • Throat depth 194mm • Speed range 500-4000rpm • No. of speeds 5 • Table size 235 x 409mm • Dimensions 815 x 372 x 627mm KEY FEATURES • Made in the UK • Bench mounted • Easy to use • Front mounted controls • Head raising mechanism • Latching footswitch

Jacobs No.6 internal taper and K3 key.

For Craft & Supercraft chucks, 13mm & 16mm.

For processing wider boards on the Sedwick TA315 Circular Sawbench.

It has a large cast iron tilting fence for accuracy and timber support, front and rear cutterblock guards, shaw guards for rebating and features an enclosed drive mechanism. A no-volt release starter with thermal overload, key switch, footswitch and anti-kick back fingers for thicknesser are fitted as standard. KEY FEATURES • Two Knife Cutter block • Cast Iron table • Cast Iron fence • 180 x 255mm thicknessing capacity • 255mm surfacing width • Footstop and key switch included • UK Manufactured

Whether deep ripping or cutting the most intricate shapes, the design features of this machine ensure it is done precisely and effortlessly. • Two speeds 800 and 1200 m/min for the most varying materials • Sturdy cast-iron table tiltable from -20° to +47° • 3-roller precision guiding above and below the table • Upper saw blade guiding by toothed rack, adjustable in its height • Balanced and polished band wheels with rubber facing • Quick-clamping lever for saw blade • Maximum cutting height: 300 mm • Throat 440 mm • Precision rip fence with magnified scale which can be set both left and right of saw blade • 3phase HxWxD: 1930 x 800 x 1140mm Weight: 214kg

The rip fence is aluminium section allowing for two working positions (ripping and angled ripping). It is fixed to a cast iron mounting bracket for rigidity and has integral micro adjustment. A telescopic extension arm is fitted to the cross cut fence for setting the timber stop. The 620mm Cross Cut Table is designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming. It has a maximum depth of cut 105mm @ 90° and 76mm @ 45°, double sided saw guard with dust extraction outlet, enclosed drive mechanism. Supplied with an anti kick saw blade. Thermal overload, no-volt release switch, lock off emergency stop switch and foot operated foot switch are fitted as standard. Fitted with keyswitch.

The guarding covers the upward travelling quadrant of the spinning disc and also a unique fully height adjustable guard for the downward sanding side of the disc. Key Features: • High quality machine • Comprehensive guarding system • Large sanding table • Sanding angle range 0-45° • Velcro backed sanding discs • Robust adjustable fence • Safety brake

Key features: • Robust cast iron construction • Belt and pulley Drive - 4 speeds • Rack and pinion table raising mechanism • Integral easy to use depth stop • High quality induction motor • T slot table with centre hole • Slotted base • Tilting table • Integral high intensity LED work light • CE Approved Specification: Drilling Capacity: 3-16mm Spindle: 2MT Spindle Speed: 480,820, 1390, 2300rpm at 50Hz Spindle Travel: 110mm Column Diameter: 75mm Table Size (DxW): 225mm x 235mm Power reqirements: Single phase (230V) Power consumption: 0.375kW Dimensions: Height: 900mm Width: 345mm Depth: 670mm Weight: 94kg

The TS1B bench drill has a 13mm drilling capacity, 2 MT spindle and 4 speed operation. It is supplied with a Silverflame BT2 telescopic chuck guard. Key features: • Requires a single phase supply and 10A type C breaker at board • Integral footstop • Robust cast iron construction • Belt and pulley Drive - 4 speeds • Rack and pinion table raising mechanism • Integral easy to use depth stop • High quality induction motor • T slot table with centre hole • Slotted base • Tilting table • Integral high intensity LED work light • CE Approved

The TS440 delivers consistently accurate results with its ceramic guide system, which is fully guarded (adjustments are made through the guard). When installed with the interlocked TSFL Bandsaw Dust Extractor (998-036 only) wood dust is removed from the cutting blade and from the machines dust port below the table. Key features: • Space Age Laguna Ceramic Upper And Lower Roller Blade Guides • Self Releasing Kick Stop • Blade Tension Indicator • Key Locked Security System On Doors And Isolator • Manufactured In Italy For Consistency And Quality • Electro-Mechanical Motor Brake • 240 Volt Single Phase Specification: Wheel dia.: 440mm Blade Speed: 1600 m/min Motor hp: 2hp Cutting Height: 320mm Cutting Width: 410mm Table Size: 420 x 580mm Blade Width: Min:3650mm Max:3700mm Overall Dimensions (W x D x H): 830 x 560 x 1860mm Net Weight: 200kg Dust Extraction Outlet: Two 120mm Diameter ports

The TS540 delivers consistently accurate results with its ceramic guide system, which is fully guarded (adjustments are made through the guard). When installed with the interlocked TSFL Bandsaw Dust Extractor (998-036 only) wood dust is removed from the cutting blade and from the machines dust port below the table. Key features: • Space Age Laguna Ceramic Upper And Lower Roller Blade Guides • Self Releasing Kick Stop • Blade Tension Indicator • Key Locked Security System On Doors And Isolator • Manufactured In Italy For Consistency And Quality • Electro-Mechanical Motor Brake • 240 Volt Single Phase Specification: Wheel dia.: 540mm Blade Speed: 1600 m/min Motor hp: 3hp Cutting Height: 350mm Cutting Width: 520mm Table Size: 520 x 720mm Blade Width: Min: 4190mm Max: 4270mm Overall Dimensions (W x D x H): 870 x 620 x 1970mm Net Weight: 240kg Dust Extraction Outlet: Two 120mm Diameter ports

These drills have dedicated push button controls and all pedestal drills are fitted with a suitable foot operated emergency stop. The Woodpecker complies fully with the European Machinery Directive and also with BS 4163:2014 “Health and Safety for Design and Technology in schools and similar establishments"". Key features: • Aluminium drive pulleys • Wide range of spindle speeds • Motor power transmitted through two V-Belts • Depth stop and scale indicator • Fitted with keyless chuck for hand operation • Precision chuck arbor • Rack and pinion table raising mechanism • Cast Iron control handle with soft grips • Thick wall drill column • Working table with T-Grooves and full 360 degree rotation • Cast iron base with T-Grooves Safety features: • Microswitch on belt guard • No-volt overload push-button starter • Dedicated Push Button Controls • Emergency stop • Large adjustable telescopic chuck guards • All pedestal drills fitted with foot emergency stop • Ratchet table adjustment • Lockable table • Low noise level

The Hegner Multicut 2S is a our popular mid range scrollsaw with an aluminium table which can tilt up to 45° (right hand side) and 12° (left hand side). It has an impressive throat depth of 460mm and Hegner's qucik tension release. All of our Hegner scrollsaws have these key features & benefits: Superior build quality The superior build quality means that Hegner scrollsaws will survive the rigours of school use providing many years of running. Expertly engineered to reduce vibrations, causing less stress on moving parts. Quick blade changes The quick clamp blade system makes it very easy to change a blade when required. The real benefit comes when doing piercing work. The blade can be quickly released, fed through another part of the workpiece and clamped up again. 3-Year warranty Hegner’s quality is backed up by a 3-year warranty for complete peace of mind. Mobile options Hegner scrollsaws are perfect for a mobile bench setup using our Akira™ solution, meaning easy installation and fully integrated extraction. This is the variable speed version of the Multicut 2S which allows you more control when cutting different material types and thicknesses. A fixed speed version is also availabe (HM-2S). Hegner EDU saws are fitted with No-volt overload release switches and hold down arm & guards as standard. Each Hegner Multicut 2S Scrollsaw is supplied with the following: 1 x Pack of blades with 1 doz each grades 1,5,9 for wood cutting, 1,5,9 for metal cutting and 4 machine coping saw blades 1 x Clock key for blade changing 2 x Blade Clamps fitted in machine 2 x Blade Clamps spare 1 x Quick change blade clamp for quick blade change when pierceworking 1 x Plastic table insert for fine cutting 1 x Toolkit including 2 x Hex (Allen) keys and 1x Tommy Bar

It has the heaviest construction and the fastest, most powerful cutting action of any HEGNER model. The Polycut has a heavy Cast Iron base and frame for smooth, vibration free running; a throat depth of 500mm and a four speed belt drive system (700, 1100, 1270, 1600 strokes per min.), and two stoke lengths (9/16"" and 15/16""), giving eight possible operating permutations for all types and thicknesses of material; Cast Iron 475 x 305mm, 45º tilting table: Industrial quality Phosphor Bronze sleeve bearings with oiling nipples and heavy cast arms for maximum precision; self-contained dust extraction ducting or sawdust blower; under table guard. Fitted with our most powerful 180 watt motor and No-Volt / Overload Switchgear. Weight 39 Kg. The ideal machine for heavy duty professional and industrial use. (Quick tension release is not fitted to this machine). Standard Equipment: 1 x Pack of blades with 1 doz each grades 1,5,9 for wood cutting, 1,5,9 for metal cutting and 4 machine coping saw blades. 1 x Clock key for blade changing. 2 x Blade Clamps fitted in machine. 2 x Blade Clamps spare. 1 x Quick change blade clamp for quick blade change when pierce-working. 1 x Plastic table insert for fine cutting. 1 x Toolkit including 2 x Hex (Allen) keys 1x Tommy Bar.

The Hegner Multicut 1 is a our entry level scrollsaw with a strong practical design and powerful motor. It has an aluminium table which can tilt up to 45 (right hand side) and a throat depth of 355mm All of our Hegner scrollsaws have these key features & benefits: Superior build quality The superior build quality means that Hegner scrollsaws will survive the rigours of school use providing many years of running. Expertly engineered to reduce vibrations, causing less stress on moving parts. Quick blade changes The quick clamp blade system makes it very easy to change a blade when required. The real benefit comes when doing piercing work. The blade can be quickly released, fed through another part of the workpiece and clamped up again. 3-Year warranty Hegner’s quality is backed up by a 3-year warranty for complete peace of mind. Mobile options Hegner scrollsaws are perfect for a mobile bench setup using our Akira™ solution, meaning easy installation and fully integrated extraction. This is the fixed speed version of the Multicut 1. A variable speed version is also availabe (HM-1V) which allows you more control when cutting different material types and thicknesses. Hegner EDU saws are fitted with No-volt overload release switches and hold down arm & guards as standard. Each Hegner Multicut 1 Scrollsaw is supplied with the following: 1 x Pack of blades with 1 doz each grades 1,3,5,7,9 for wood cutting 1 x Clock key for blade changing 2 x Blade Clamps fitted in machine 1 x Plastic table insert for fine cutting 1 x Toolkit including 2 x Hex (Allen) keys 1 x Tommy Bar

The Hegner Multicut 2S is a our popular mid range scrollsaw with an aluminium table which can tilt up to 45° (right hand side) and 12° (left hand side). It has an impressive throat depth of 460mm and Hegner's qucik tension release. All of our Hegner scrollsaws have these key features & benefits: Superior build quality The superior build quality means that Hegner scrollsaws will survive the rigours of school use providing many years of running. Expertly engineered to reduce vibrations, causing less stress on moving parts. Quick blade changes The quick clamp blade system makes it very easy to change a blade when required. The real benefit comes when doing piercing work. The blade can be quickly released, fed through another part of the workpiece and clamped up again. 3-Year warranty Hegner’s quality is backed up by a 3-year warranty for complete peace of mind. Mobile options Hegner scrollsaws are perfect for a mobile bench setup using our Akira™ solution, meaning easy installation and fully integrated extraction. This is the fixed speed version of the Multicut 2S. A variable speed version is also availabe (HM-2SV) which allows you more control when cutting different material types and thicknesses. Hegner EDU saws are fitted with No-volt overload release switches and hold down arm & guards as standard. Each Hegner Multicut 2S Scrollsaw is supplied with the following: 1 x Pack of blades with 1 doz each grades 1,5,9 for wood cutting, 1,5,9 for metal cutting and 4 machine coping saw blades 1 x Clock key for blade changing 2 x Blade Clamps fitted in machine 2 x Blade Clamps spare 1 x Quick change blade clamp for quick blade change when pierceworking 1 x Plastic table insert for fine cutting 1 x Toolkit including 2 x Hex (Allen) keys and 1x Tommy Bar

The Hegner Multicut 1 is a our entry level scrollsaw with a strong practical design and powerful motor. It has an aluminium table which can tilt up to 45 (right hand side) and a throat depth of 355mm All of our Hegner scrollsaws have these key features & benefits: Superior build quality The superior build quality means that Hegner scrollsaws will survive the rigours of school use providing many years of running. Expertly engineered to reduce vibrations, causing less stress on moving parts. Quick blade changes The quick clamp blade system makes it very easy to change a blade when required. The real benefit comes when doing piercing work. The blade can be quickly released, fed through another part of the workpiece and clamped up again. 3-Year warranty Hegner’s quality is backed up by a 3-year warranty for complete peace of mind. Mobile options Hegner scrollsaws are perfect for a mobile bench setup using our Akira™ solution, meaning easy installation and fully integrated extraction. This is the variable speed version of the Multicut 1 which allows you more control when cutting different material types and thicknesses. A fixed speed version is also availabe (HM-1). Hegner EDU saws are fitted with No-volt overload release switches and hold down arm & guards as standard. Each Hegner Multicut 1 Scrollsaw is supplied with the following: 1 x Pack of blades with 1 doz each grades 1,3,5,7,9 for wood cutting 1 x Clock key for blade changing 2 x Blade Clamps fitted in machine 1 x Plastic table insert for fine cutting 1 x Toolkit including 2 x Hex (Allen) keys 1 x Tommy Bar

As standard 0.7mm blade clamp but supplied with additional socket head machine screw to replace the clock screw should you prefer the old Hex (Allen) key method to tighten the clamps

The rip fence is aluminium section allowing for two working positions (ripping and angled ripping). It is fixed to a cast iron mounting bracket for rigidity and has integral micro adjustment. A telescopic extension arm is fitted to the cross cut fence for setting the timber stop. The 620mm Cross Cut Table is designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming. It has a maximum depth of cut 105mm @ 90° and 76mm @ 45°, double sided saw guard with dust extraction outlet, enclosed drive mechanism. Supplied with an anti kick saw blade. Thermal overload, no-volt release switch, lock off emergency stop switch and foot operated foot switch are fitted as standard. Fitted with keyswitch.

The hand-wheel is made from an ergonomically designed one piece casting for comfort of use whilst also providing additional weight to the headstock. These models come with 12 speeds making them ideal for drilling metal as well as wood. MT2 arbor No volt release switch Complete with 16mm chuck We strongly recommend footstop switches are added to these machines to comply with BS4163:2007.

The head itself is counterbalanced by a weight, giving fingertip control to the rise and fall and eliminating the breakages associated with spring type mechanisms. Its 1.1kw industrial fan cooled motor provides ample power for continuous duties and is fitted with a fully guarded adjustable chuck. Unlike a collet type system the chuck holds the auger firmly round its circumference, true to the centre line of the chisel, securing longer tool life and better cutting capability. The table has longitudinal and lateral movement on a single handwheel, not only for ease of operation, but also for more precise positioning: lateral adjustment of the table being better controlled by a central screw. The angled timber clamp is adjustable on a tee slot, to give a maximum timber width of 200mm. Coupled with the height adjustable chisel head which can give a maximum timber height of 255mm underneath the chisel, the Sedgwick 571 has exceptional capability. For repetition work there are longitudinal stops along the front of the table, a marking out rail complete with turnover stop along the rear; and 2 position depth stop for haunching. The switchgear has no volt release, thermal overload protection, and a mushroom headed stop button.

It has many unique features you find in more expensive bandsaws, including steel and die-cast alloy construction, solid ripping fence for straight cuts, a 100 / 195 mm cutting capacity, and powerful 300 watt motor. A variety of different blade sizes (3.0 – 12 mm) will give you the versatility to perform all types of straight, bevel, and intricate curved cuts in a variety of materials including wood, plastics, and alloy metal. Multi angle cuts are easy to perform with the standard mitre guide. • 3-roller precision guiding above and below the table • Upper saw blade guiding by toothed rack, adjustable in its height • Balanced band wheels with rubber facing • Sturdy cast-iron table, tiltable from 0° to 45° • Maximum cutting height: 100 mm • Throat: 195 mm • Precision ripping fence with magnifying glass, to be used at the left, as well as on the right side of the saw blade