Hotplates & Stirrers

Designed with microprocessor-controlled dual thermocouples, this stirring hot plate offers accurate temperature control and protection from overheating. The analogue models feature a coloured LED indicator which surrounds the heat control knob illuminating the actual surface temperature in real time. Powerful magnets and motor provide stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. This model includes an integral fitting for a retort rod and allows the retort base to slide underneath. Featuring a chemically resistant glass ceramic top plate that stays cool around the edges to help prevent burns. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.

Designed with microprocessor-controlled dual thermocouples, this stirring hot plate offers accurate temperature control and protection from overheating. The analogue models feature a coloured LED indicator which surrounds the heat control knob illuminating the actual surface temperature in real time. Powerful magnets and motor provide stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. This model includes an integral fitting for a retort rod and allows the retort base to slide underneath. Featuring a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.

A cost effective hotplate/stirrer, the 'MS-Series has the following features and specification: • Case construction: Steel, with chemical resistant coating • Stage area: 180 x 180 mm • Temperature: Up to 400 °C (max) • Speed range: 100 - 1500 rpm • Power Supply: 220 AC

Designed with microprocessor-controlled dual thermocouples, this stirring hot plate offers you accurate temperature control and protection from over-heating. Actual surface temperature is displayed in real time on an easy-to-read digital screen. Powerful magnets and motor provide stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The units also include BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Includes an integral fitting for a retort rod and allows the retort base to slide underneath. Features a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.

The SM5 mini stirrer is a powerful magnetic stirrer, capable of stirring up to 1 litre with an adjustable stirring speed up to 2,000 rpm. The unit is made from robust polypropylene with chemically resistant polycarbonate top. Features: • Lightweight stirrer • Capable of stirring up to 1 litre • Universal power adaptor • With BioCote antimicrobial protection • Dimensions (L x W x H): 143 x 143 x 64 mm

Constructed with powerful magnets and motor, this compact stirrer provides you with stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. For safety, this unit is designed to direct spills away from the user controls. The stirrer also features BioCote® antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Features a chemically resistant glass ceramic plate.

Constructed from chemically resistant ceramic coated steel, the MS-200 analogue magnetic stirrer delivers excellent reliability with reproducible results at a sensible price. A screwed 12.5 mm screwed thread is included for the addition of a retort rod (not included).

The HI-190M-0 is a compact and lightweight mini magnetic stirrer with plastic cover and can stir up to 1 litre. The compact size of this stirrer allows users to maximise bench space for efficiency and safety The internal Speedsafe™ mechanism ensures that the maximum speed of 1,000 rpm is never exceeded. The ABS housing will resist the most harmful chemicals in the classroom. Supplied with; •ABS cover •Micro stir bar •Instructions

An extremely good value compact magnetic stirrer, ideal for student use. The base is white to allow unaffected observation during experiments with colour indicators. The unit has adjustable feet to ensure stability on the bench. The speed is adjustable, and is controlled by the intuitive rotary knob on the front, which also controls power. Supplied with SELV (Safety Extra Low Voltage) AC adaptor, and magnetic stirrer bar.

An extremely good value compact magnetic stirrer, ideal for student use. The base is white to allow unaffected observation during experiments with colour indicators. The unit has adjustable feet to ensure stability on the bench. The speed is adjustable, and is controlled by the intuitive rotary knob on the front, which also controls power. Supplied with SELV (Safety Extra Low Voltage) AC adaptor, and magnetic stirrer bar.

Magnetic, encased in PTFE. With centre rim.

Magnetic, encased in PTFE. With centre rim.

Magnetic, encased in PTFE. With centre rim.

Magnetic, encased in PTFE. With centre rim.

Magnetic, PTFE coated stirring bar retriever. 35 cm in length.

The Tornado™ Vortexer is a general purpose mixer for applications that demand vigorous and uniform vortexing. • One mixing head does it all with this sleek, modern and compact design vortex mixer! • Control switch with three operation selections (intermittent, off, continuous). • Infinite position rotary speed control from Off up to approx. 3000 rpm • Made of durable, easy to clean ABS material and stable elastomer feet stabilize the unit and dampen vibration. Specifications Speed Range: From 0 to 3000 rpm (shaking to vortexing) Orbit: 3.7 mm Control: 3 position slider - (top) intermittent, (middle) off, (bottom) continuous Weight: 3.93 kg Dimensions: 171 W x 190 D x 197 H mm (with mixing head in place) Warranty: Five Years Mixing Head Holding Capacity • Centre pad area for hand held mixing • Assay Plate x 1 (to be used with retention cords) • 50 mL conical tubes x 2 (horizontally mounted) • 15 mL conical tubes x 2 (horizontally mounted) • 5 mL tubes x 2 (horizontally mounted in the same retention space as 15 mL) • 1.5/2 mL microfuge tubes x 4 (vertically mounted) • 0.5 mL microfuge tubes x 6 (vertically mounted) • 0.2 mL microfuge tubes (strip tubes) x 24 (vertically mounted)

The Medline 50 mL controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

The Medline 100ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

The Medline 250ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support. Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.

Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support. Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

Reaction heater block for round bottom flasks (one flask capacity), suitable for use with the hotplate stirrer ST150100. Made from solid aluminium, this block, when used with suitable hotplate, offer useful alternative to a heating mantle, making the hotplate/stirrer even more versatile. 100 mL flask size.

Compact, portable, solid plate design which is sealed against spillages with a durable easy to clean polished steel finish. Variable heat control from simmer to boil. •Cast iron hotplate •Variable heat settings •Overheat protection •Corrosion resistant •Power indicator •Easy clean finish •Non-slip rubber feet •Hotplate diameter: 185 mm •Power: 1500 W

This robust hotplate and magnetic stirrer is made of stainless steel with a ceramic to coating resist corrosion. It also has a separated safety circuit which will automatically stop heating when temperature reaches 350 degrees. The variable speed motor is designed to stay at a constant speed even during change in load. High magnetic adhesion ensures that the stirrer bar stays stable at the bottom of the container. It features an enclosed assembly with protection class IP42 and a DC brushless motor which guarantees long product life. A block heater, ST150115 is available as an accessory.

Designed with a microprocessor-controlled dual thermocouple, this hot plate offers accurate temperature control and protection from overheating. A coloured LED indicator surrounds the heat control knob illuminating the actual surface temperature in real time. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250-mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit also includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Includes an integral fitting for a retort rod and allows the retort base to slide underneath. This unit has a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.

This analogue hotplate offers a large heating area of 180 x 180 mm with safe controlled heating up to 400°C. Constructed from chemically resistant ceramic coated steel, this hotplate delivers excellent reliability with reproducible results at a sensible price. A screwed 12.5 mm screwed thread is included for the addition of a retort rod (not included).

Magnetic, encased in PTFE. With centre rim