Workbenches

Lino - 30mm overall with a 28mm particle board core with a 2mm linoleum surface complete with durable plastic edgebanding. An easy clean, general duty top ideal for office, assembly and storage areas. • Robost steel section framework with corner bracing • Height adjustable frame • 30mm worktop • Optional storage units available • Comprehensive self assembly instructions included • Powdercoat RAL7035 grey finish • Built to last 10 years guarantee HxWxD: 780 - 930 x 1500 x 600mm

Hexagonal six pupil premium workbench, including 7inch fitted quick release wood vices. Each heavy duty steel foot is adjustable to cope with the most uneven of floors. The frame is made up from only five components and 8 bolts and takes 5 minutes to assemble with the Allen keys provided.

Hexagonal six pupil premium workbench, including 7inch fitted quick release wood vices, under storage cupboard and shelves. Each heavy duty steel foot is adjustable to cope with the most uneven of floors. The frame is made up from only five components and 8 bolts and takes 5 minutes to assemble with the Allen keys provided.

Heavy duty Record No. 1 vice 3inch (75mm) with a jaw opening to 90mm. Must be ordered with a bench for fitting.

Octagonal bench, fully versitile for use as an academic or practicle workstation. • Can accommodate 8 pupils and 8 vices. • Birch plywood carcase. • 4 point access provides the opportunity for tool management and work piece storage. • Woodwork vices and bench hold-fasts are optional extras. • Standard sizes (mm) width 1830 across flats of top. height 810 option.

Square rail, solid beech timber frame with full length cupboard. Fitted with a beech well top with a flip over centre panel. • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Dimensions: 1200 x 1200mm • Heights available 810mm or 860mm please state when ordering

Square rail, solid beech timber frame with full lenth cupboard. Fitted with a solid beech cleated and drawbolted flush top.Fitted vices need to be specified separately and ordered at the same time as the bench. • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Dimensions: 1200 x 1200mm • Heights available 810mm or 860mm please state when ordering

Octagonal Steel Frame Workbench with Solid Beech Top Type Z.

Octagonal bench, fully versitile for use as an academic or practicle workstation. • Can accommodate 8 pupils and 8 vices. • Birch plywood carcase. • 4 point access provides the opportunity for tool management and work piece storage. • Woodwork vices and bench hold-fasts are optional extras. • 6mm MDF cover tops available - 530-631 • Standard sizes (mm) width 1830 across flats of top. height 810 option. Vices not included.

Increasingly popular in bench design, fully versatile for use as an academic or practical workstation. • Can accommodate 8 pupils and 8 woodwork vices. • Steel frame available in a choice of colours to suit individual classroom layouts. • Woodwork vices and bench hold-fasts are optional extras. • Standard sizes (mm) width 1830 across flats of top, height 810mm or 860mm. Choice of tops: 530-672W - MDF 530-672Z - Beech (Solid)

This is a fitted vice and must be ordered with a bench for fitting.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Optional 6mm reversible loose cover tops available - (530-673). • Standard sizes (mm) 1220 square tops x height 810mm. Vices not included.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Standard sizes (mm) 1220 square tops x height 810mm.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Optional 6mm reversible loose cover tops available - (530-673). • Standard sizes (mm) 1220 square tops x height 810mm. All benches exclude vices (sold separately).

1200mm2 heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Heavy duty steel frame. • MDF top. • 2 door cupboards. • Can be fitted with 4 xwoodwork vices. • 1220 square tops, 860mm high.

1200mm2 heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted • Choice of tops • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm² heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted* • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm² heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Steel frame available in a wide choice colours. • Solid beech top with flip over central well illustrated • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Optional 6mm reversable loose cover tops available • Standard sizes (mm) 1220 square tops, height 810 option.

1200mm2 heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Steel frame available in a wide choice colours. • Solid beech top with flip over central well illustrated • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Optional 6mm reversable loose cover tops available • Standard sizes (mm) 1220 square tops, height 810 option.

1200mm² heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted • Choice of tops • Choice of frame colours • Standard sizes 1220mm square *Vices not included

Record No.1 3inch jaw, opening to 3¼inch with replaceable serrated jaws. This vice is fitted to a catchment tray, for use in a woodwork vice.

1200mm2 heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted* • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm squared heavy duty powder coated diagonal steel frame. A maximum of 4 x woodwork or 4 x metal work vices can be fitted. • Beech well top. • Cross stretcher design provide ample leg room for seated users and wheelchair access. • Standard sizes 1220mm square and 860mm high.

Birch multi plywood cupboard unit has a single lockable door dimensions 620mm square, 490mm height Cupboard unit provides storage also allowing legroom for seated users Standard size 1220mm square, height option of 810 or 860mm

The Craftwork 2000 is the premium workbench for the educational workshop environment. Featuring a solid beech top with reversible tool well and a fully welded powder coated steel frame. Available with a variety of vice configurations but normally specified with 4 x 7inch woodwork vices with hardwood jaws and quick release mechanism as standard. For multi-media use piggy-back metal vices can be specified. These allow the students to work at this bench with a wide range of materials and provides the most versatile workshop bench solution. Dimensions: 1200 x 1200 x 825mm.

Record heavy duty vices with 8inch opening, complete with coverplate and cheek pieces. Plain screw or quick release.

Record heavy duty vices with 8inch opening, complete with coverplate and cheek pieces. Quick release.

Rigid and robust, the body and sliding jaw are cast from close grained grey iron which is machined on all friction surfaces for a smooth, reliable action. Fitted with hardened steel jaws for extended life, they can be replaced when worn. The main steel screw has a two-start rolled thread for faster and smoother operation. It has a fused steel handle that will bend before the vice can be overstressed. A safety stop prevents the slide from being separated from the body. The most popular and widely used general purpose vice for light to medium-duty applications.

British made from high quality cast iron. They have hardened steel replaceable jaw plates.

• Three accurately ground mounting surfaces for drilling holes at 90° • Made from cast iron • Precision ground jaws • Jaw width: 100mm • Jaw opening: 85mm

Cast iron frame with hardened steel jaw plates and swivel base. Grey iron casting resists distortion under high pressure. Chrome-plated handle and lead screw. Clamp travel - 125mm (8kg vice) and 140mm (16kg vice).

The built-in clamp allows it to be easily and quickly attached to a bench, table or work surface up to 1.5/8in deep. Pipe grips are incorporated below the parallel jaws. A useful anvil is included on the rear of the body. Jaw Width. 75mm (3in).

• Quality cast iron body with curved jaws. • 40mm capacity bench clamping screw

Please specify the choice of frame colour when ordering. • Moisture resistant MDF top with solid beech lippings • Cabinet, 330mm wide x 430mm deep x 510mm high. Made from genuine birch multiply, with solid back panel available in red, blue, green or yellow. • 4 removable trays, available in a range of colours • Optional multi functional anti vibration/locking castors • Maximum of 4 woodwork/metalwork vice fitted (vice details 75mm) •Optional multi functional anti vibration/locking castors

Special fibre more durable than lead or copper. Supplied in pairs. Size. 100mm (4 in).

Portable vices with built-in clamp allows quick and easy attachment to a bench, table or work surface. Woodwork vices, 150mm jaw, 120mm opening. Max table thickness 55mm.

The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism. Fitted with front dog. Jaw Width. 175mm (7in). Jaw opening: 200mm (8in)

Fixing kit for 9inch vices.

Record Irwin V175B Woodcraft Vice is designed for the user who requires a more robust vice which is permanently fixed. The main screw has a rolled 2-start acme thread which ensures a smooth strong action with the integral nut in the vice body. A top quality vice at an economical price. Boxed. Jaw Width: 175mm (7in). Jaw opening: 165mm (6.1/2in).

Vice fixing kit suitable for Record 52PD vice (210-107).

Phenolic steel frame workbench fitted with 4 x 7inch Eclipse quick release woodworking vices. Phenolic resin is contructed of saturated malamine resins and layers of phenolic impregnated kraft paper. The melamine resin produces a very durable thermoset plastic and is a nonabsorbant counter top providing a unique apperarance that is highly resistant to graffiti.

Its primary usage is to provide a stable, reliable, configurable bench solution in a mobile format that facilitates flexible environments in technical settings. Designed alongside educators, the Akira™ Machinery WorkBench offers education-specific features in a modular format and includes pre-installed machinery configurations. Coupled with other products in the Akira™ family, the modular solutions provide consistent work stations across a wide variety of practical education applications in colour themes to suit your school setting. The Akira™ WorkBench is built to last. Its load-bearing structure is fabricated from heavy-gauge steel, providing unparalleled rigidity and stability - and therefore safety in use. The timber worktops, panelling and storage units are environmentally sourced and precisely engineered in Germany. Power unit options are designed and manufactured across Europe, providing a safe, reliable, and user-friendly power solution for teachers and students. The WorkBench is, overall, a highly sustainable solution - the steel frame's considerable lifespan, coupled with the replaceable nature of modular components such as panels, worktops, storage and power units, result in a product solution that will stand the test of time under heavy educational usage. Installed with 2 x Hegner scrollsaws and extraction.

Its primary usage is to provide a stable, reliable, configurable bench solution in a mobile format that facilitates flexible environments in technical settings. Designed alongside educators, the Akira™ Machinery WorkBench offers education-specific features in a modular format and includes pre-installed machinery configurations. Coupled with other products in the Akira™ family, the modular solutions provide consistent work stations across a wide variety of practical education applications in colour themes to suit your school setting. The Akira™ WorkBench is built to last. Its load-bearing structure is fabricated from heavy-gauge steel, providing unparalleled rigidity and stability - and therefore safety in use. The timber worktops, panelling and storage units are environmentally sourced and precisely engineered in Germany. Power unit options are designed and manufactured across Europe, providing a safe, reliable, and user-friendly power solution for teachers and students. The WorkBench is, overall, a highly sustainable solution - the steel frame's considerable lifespan, coupled with the replaceable nature of modular components such as panels, worktops, storage and power units, result in a product solution that will stand the test of time under heavy educational usage. Installed with 1 x Hegner scrollsaw, 1 x Hegner disc sander and extraction.

Its primary usage is to provide a stable, reliable, configurable bench solution in a mobile format that facilitates flexible environments in technical settings. Designed alongside educators, the Akira™ Machinery WorkBench offers education-specific features in a modular format and includes pre-installed machinery configurations. Coupled with other products in the Akira™ family, the modular solutions provide consistent work stations across a wide variety of practical education applications in colour themes to suit your school setting. The Akira™ WorkBench is built to last. Its load-bearing structure is fabricated from heavy-gauge steel, providing unparalleled rigidity and stability - and therefore safety in use. The timber worktops, panelling and storage units are environmentally sourced and precisely engineered in Germany. Power unit options are designed and manufactured across Europe, providing a safe, reliable, and user-friendly power solution for teachers and students. The WorkBench is, overall, a highly sustainable solution - the steel frame's considerable lifespan, coupled with the replaceable nature of modular components such as panels, worktops, storage and power units, result in a product solution that will stand the test of time under heavy educational usage. Installed with 2 x Meddings bench drills.

Fixing kit for 7inch vices.

This bench is fitted with a beech top. Standard sizes 1800mm long, 760, 810 or 910mm wide and 810 or 860mm high. A maximum of 4 metalwork vices can be fitted (sold separately).

Metal framed bench with a beech top and fitted cupboards underneath, a maximum of 4 metalwork vices can be fitted (not included). HxWxD: 860 x 810 x 1800mm.

Flush top with cupboards.

Its primary usage is to provide a stable, reliable, configurable bench solution in a mobile format that facilitates flexible environments in technical settings. Designed alongside educators, the Akira™ Machinery WorkBench offers education-specific features in a modular format and includes pre-installed machinery configurations. Coupled with other products in the Akira™ family, the modular solutions provide consistent work stations across a wide variety of practical education applications in colour themes to suit your school setting. The Akira™ WorkBench is built to last. Its load-bearing structure is fabricated from heavy-gauge steel, providing unparalleled rigidity and stability - and therefore safety in use. The timber worktops, panelling and storage units are environmentally sourced and precisely engineered in Germany. Power unit options are designed and manufactured across Europe, providing a safe, reliable, and user-friendly power solution for teachers and students. The WorkBench is, overall, a highly sustainable solution - the steel frame's considerable lifespan, coupled with the replaceable nature of modular components such as panels, worktops, storage and power units, result in a product solution that will stand the test of time under heavy educational usage. Installed with 1 x Hegner scrollsaw, 1 x RJH bandfacer and extraction.