Centrifuges

A low-cost centrifuge, with fixed speed, quiet operation, and simple-to-use controls. The unit accelerates and brakes in seconds. The included rotors can be changed easily without tools. •Max Speed: 7000 rpm •Max. RFC: 2680 kg •Rotor Capacity: 0.2/0.5/1.5/2.0 mL x 8; 0.2 mL x 16 PCR strips or 0.2 mL x 2 PCR strips • Dimensions (D x W x H): 160 x 170 x 122 mm •Noise level: 45 dB (A) •Weight: 0.5 kg

The Targa Centrifuge (model NE 010G) from Clifton spins at up to 4000 rpm, with an acceleration/deceleration time of approx. 20 seconds. Complete with lid lock safety and lid drop protection. The motor is fitted with a safety cut out device. The lid automatically releases on completion of spinning down samples and includes a visual/audible end alarm. The rotor can only be energised when the lid is correctly closed and locked. A viewing window in the lid enables the rotor motion to be observed. Fitted with non-slip rubber feet for safety. Built to the latest safety standards and supplied with comprehensive operating instructions. •Noise Level: <52 dB •Dimensions (W x D x H): 296 x 412 x 206 mm •3-year warranty

A competitively priced centrifuge to suit education budgets but designed to be used in medical and university research laboratories. With speed range of 300-4500 rpm and maximum rotor capability of x 15 ml tubes the clinical centrifuge allows precise control of time and speed ensuring an efficient separation process. The stable design and noise level of less than 56 dB allows the centrifuge to work without becoming disturbance. The centrifuge's CPU controls all operating parameters including speed and time settings. Operation of the centrifuge can be timed from 30 seconds to 99 minutes or can be run in continuous mode. Timing will only commence when the set speed is reached ensuring that the separation time is highly accurate. The centrifuge breaks gently to preserve separation and not damage samples. The large, user-friendly LCD screen displays all information including RPM and Force. Parameters of the centrifuge can be set and modified after the set speed is reached. quick spin mode is also available which is activated by pressing and holding the 'PULSE' button. The centrifuge can be accelerated to the required speed and held for as long as the button is held down and also has an automatic lid release. When the process is finished this saves time and protects samples from heat build-up. •Max. Speed [rpm]: 300-4500, increment: 100 •Speed Accuracy [rpm]: ±20 •Rotor Capacity: 12 x 10 ml/7 ml/5 ml; 8 x 15 ml •Run Time: 30 sec - 99 min-HOLD (Continuous operation) •Driving Motor: Brushless DC motor •Safety Devices: Autolock lid when centrifuge is spinning •Detailed instruction manual included

A very economical centrifuge that clamps directly to any bench top. It features a table clamp, hand crank and 4 buckets holding tubes up to 15 mL in capacity.

The OHAUS Frontier 5306 is small but powerful mini centrifuge for simple and quick liquid separation. With an 8-place 1.5 mL or 2 mL tube rotor as well as 4 place PCR 8-strip tube rotor, the Frontier™ 5306 can accommodate 0.2 mL strip tubes or 32 individual PCR tubes. With the included adapter, 0.2 mL and 0.5 mL tubes can also be accommodated in the place tube rotor. This centrifuge provides quiet, safe, and easy operation for your everyday quick spin-down applications. With low voltage power input, quiet brushless motor and rubber base that absorbs vibrations, the Frontier 5306 minimizes operational noise and reduces disruptions in the classroom. It is designed with operator safety in mind, and includes rotor imbalance sensor and two safety switches which immediately stop the rotors should the lid open during use. It is also very easy to use simply place your sample in the centrifuge, close the lid, and it will begin to rotate without the press of button. • Speed: - 6,000 rpm • Max. relative centrifuge force: 2,000 g • Max. capacity: x 1.5 mL/2 mL tubes

The Piccolo™ microcentrifuge is easy to use (and clean), economical, and is suitable for most teaching applications, including quick spin-downs, micro-filter separations and cell pelleting. It takes only a small footprint and offers quiet operation. The palm shaped lid, suitable for left or right-handed users, allows quick extraction of tubes and the weighted rubberised base eliminates potential movement and further dampens vibration and noise •Ideal for microcentrifuge tubes •Maximum speed 6,000 rpm •Maximum RFC: 2,000 x g •Included is an 8-place rotor for 1.5 or 2.0 mL tubes •Dimensions: 153 x 128 x 104 mm

Rimless, conical, soda glass. 15 mL capacity, 17 mm diameter. Dimensions: 111 x 17 mm.

Round bottom, graduated at 2.5, & 10 mL. To fit TARGA centrifuge CE03900. Dimensions: 95 x 16 mm.

Round bottom, plain. To fit NE010G/I NE010GT/i centrifuges CE03902 CE03903. Dimensions: 100 x 16mm.