Water Purification

Replacement Cartridge for Deioniser, Vision 125

A compact all glass still, which can be wall or bench mounted. Produces up to 4 litres per hour of single distilled water. Consisting of horizontal boiler with 3 kW heating element and double coil condenser which cools the distillate to around 30 °C. The boiler can be drained via a stopclock and cleaned without dismantling. Two independent, automatic safety thermostats are fitted to prevent overheating. Supplied with level control device which turns the heater off when the reservoir is full. Requires minimum flow of1 l/minute. Dimensions 540 x 160 x 410 mm (W x D x H)

Spare boiler for the Distinction water still, WA17601.

Spare heater for the Distinction water still, WA17601.

An economically priced, wall mountable, all-glass water still, producing 4 litres per hour single distillate. With two independent safety thermostats, condenser, boiler, 3 kW sheathed heater and screw thread connections. Includes acid addition port and drain cock system for descaling the boiler. Dimensions 500 x 150 x 450 mm(W x D x H).

This water still produces ready-to-use cold, distilled water. The high quality borosilicate glassware coupled with silica sheathed heaters gives pyrogen-free distillate of the highest purity from virtually any raw water supply. The boiler feed is pre-heated to increase efficiency. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time ensuring maximum energy transfer. All-glass construction allows rapid descaling using strong mineral acids. built- in ""clean"" function and integral acid addition funnel make the cleaning operation simple and safe with no need to dismantle any of the glassware. large bore stopcock with PTFE key is fitted for easy draining of chemicals after cleaning. A flow sensing device prevents overheating, and allows the unit to run on water supplies with pressure as low as psi (20 kPa). Requires a minimum flow of 1 litre per minute. There is an over-temperature thermostat mounted in the boiling chamber as an additional fail-safe. The acrylic safety screen and the cabinet lid are removable giving easy access to the glassware components. Screw threads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The control is simple and effective system which can be fitted to virtually any type of reservoir vessel. It will turn the still off when the reservoir is full, and restart it when the level in the reservoir drops, making it fully automatic. • 4 litres per hour output • Highly efficient • Fully automatic • Built-in ""clean"" function • Wall mounting bracket included

The ultimate in water filtration. Crystal clear pure refreshing water on tap. Using a five-stage water filtration system the RO5D150 reverse osmosis delivers unrivalled quality in water filtration. 1st Stage - 5-micron Polypropylene filter (life Span 6 months Approx) •Removes all particles above 5 microns from the water supply this includes metals and general water sediment. 2nd Stage - carbon water filter (life Span 6 months Approx) •Removes herbicides, pesticides, trihalomethanes, chlorine, organic chemicals, lead and aluminium. 3rd Stage - 1-micron Polypropylene water filter (life Span 6 months Approx) •Removes all particles above 1 micron from the water supply this includes any remaining water sediment. 4th Stage - Membrane 0.001 m rating (life Span 24 months Approx) •The membrane creates the finest filtration, the treated water is forced through the membrane minimum pressure 1 bar required and any un-pure water is discarded this is generally around 75 – 80% allowing through just pure filtered water to enter the pressurised holding tank. 5th Stage - Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It can give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm. Typical % removal rates: Sodium 99% Calcium 99% Magnesium 99% Potassium 98% Iron 99% Manganese 99% Aluminium 99% Ammonium 97% Copper 99% Nickel 99% Zinc 99% Strontium 99% Cadmium 99% Silver 98% Mercury 98% Barium 99% Chromium 99% Lead 99% Chloride 99% Bicarbonate 98% Nitrate 97% Fluoride 98% Silicate 98% Phosphate 99% Chromate 99% Cyanide 95% Sulphate 99% Thiosulfate 99% Ferro cyanide 97% Bromide 98% Borate 50% Arsenic 99% Selenium 99% Bacteria 99% Protozoa 99% Amoebic Cysts 99% Giardia 99% Asbestos 99% Oestrogen 99% Sediment/Turbidity 99% Perfluoro octane Sulphonate (PFOS) 99% Easy DIY install no plumbing experience required. 12 month manufacturers warranty. Comes complete with 15 litre pressurised tank (at 7 psi). With internal Medical grade bladder for Water storage. •Width 350 mm, depth 175 mm, height 480 mm •Tank width 275 mm, depth 275 mm, height 350 mm •Operating pressure 45-100 psi gross volume 15 litre approx nett 9 litre

6 Month replacement filter pack for Reverse Osmosis System WA220000. Pack contains 1 x 5 Micron Sediment Filter 1 x Carbon Block Filter 1 x 1 Micron Sediment Filter 1 De I Post Filter ** Please note filters may look different to the image but the contents are still the same.

This water still gives high quality distilled water with low conductivity and is pyrogen-free. The unit has built-in safety features like gate valve, flow switch, thermostat and fuse. The distilled output is cool, ensured by a high efficiency coiled condenser. The temperature of the distillate is 25 - 40°C tested at an ambient room temperature of 30° C. •Output 4 L/hour •PH 5.5 - 6.0 •Cooling Water Required 1-2 L/min •Minimum Pressure 3 p.s.i. •Net Weight 6 Kg