Ph

A sturdy, compact pH meter which gives fast, accurate readings, displayed clearly on large LCD. The thin long-reach tube fits easily into test tube. Two-point calibration with automatic buffer recognition. Takes CR2032 cell (included). • Range: pH 0.00-14.00 • Resolution: 0.01 pH • Accuracy: ±0.2 pH • Battery life: 1000 hours • Dimensions: 71 x 50 x 21 mm (excluding probe) • Weight: 50 g

Replacement Electrode for PH180100

Compact, waterproof pocket meter with dual display showing pH and °C. • pH range 0.0-14.0 • Temperature range 0.0-60.0 °C • A.T.C. auto shut off (after mins) • Automatic or point calibration • Replaceable pH electrode • Dimensions (L x W x D): 163 x 40 x 26 mm

Replacement Electrode for pH Pocket Testers

This pocket pH meter is easy to use, giving fast, accurate and repeatable measurements of pH values. It has the unique feature of a retractable electrode. The LCD display has large digits making it easy to read and the protective cap allows the inclusion of a small sponge to keep the electrode moist to help prolong its life. Dimensions (L x W x D): 158 x 40 x 34 mm. • 0 to 14.0 pH 0.1pH (MPH-5011) • Impact-resistant ABS case • Splash-proof membrane keypad • Electrode can be extended up to 80 mm • Manual calibration via screw trim pot • Pocket clip moulded on the rear of the case • Supplied with electrode, protective cap, calibration screwdriver, 50 mL calibration solution and carry case • Powered by 9 V PP3 battery • Weight: 120 g • Warranty: 6 months

This pocket pH meter is easy to use, giving fast, accurate and repeatable measurements of pH values. It has the unique feature of a retractable electrode. The LCD display has large digits making it easy to read and the protective cap allows the inclusion of a small sponge to keep the electrode moist to help prolong its life. Dimensions (L x W x D): 158 x 40 x 34 mm. • 0 to 14.0 pH 0.01pH (MPH-5011A) • Impact-resistant ABS case • Splash-proof membrane keypad • Electrode can be extended up to 80 mm • Manual calibration via screw trim pot • Pocket clip moulded on the rear of the case • Supplied with electrode, protective cap, calibration screwdriver, 50 mL calibration solution and carry case • Powered by 9 V PP3 battery • Weight: 120 g • Warranty: 6 months

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

pH Electrode Cleaning Solution, 'Hanna'

Robust, double junction gel filled electrode with temperature range to 80°C. With free cleaning solution.

A high performance, single junction, refillable electrode with temperature range -5 to 100°C. With free cleaning solution.

pH Electrode Storage Solution, 'Hanna'

Plastic bottles, air-tight with gromit to stop pH electrodes from drying out.

The FiveEasy F20 meter has a large, well-structured display, intuitive button arrangement and simple menu which ensures that measurements can be performed in just a few clicks. •Compact design saves space; Through its compact design and the ability to remove the sensor holder and store it on the side of the meter, little bench space is needed. •Simple and secure data transfer; The FiveEasy meter allows data to be exported either directly to a printer or a PC for further processing using RS232 or USB ports. •Range: pH 0.00 – 14.00 x 0.01 •Temperature range: 0 °C – 100 °C •3-point calibration •Supplied with a LM438 general pH sensor •Dimensions: 227 x 147 x 70 mm •Weight: 630 g •4.3” LCD display

The 8000 pH meter features an easy to read, LCD display and is supplied with a budget pH electrode. The 8000 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and an accuracy of ±0.05 pH. The pH readings are manually temperature compensated over the range of 0 to 60 °C (default 25 °C). The unit will power off automatically after ten minutes, maximising battery life. At the touch of a button, the instrument will automatically re-calibrate itself when used in conjunction with pH buffer solutions. Features: •Easy to use re-calibration feature •±0.05 pH accuracy •2 year guarantee on meter, 6 months on electrode •Operating Temperature 0ºC to 50ºC

Budget pH electrode. •Ideal for pH measurement of liquids and semi-solids •Ideal for laboratory applications •Ø12 x 120 mm •Temperature operating range 0 to 60°C