Components

Low cost momentary (non-locking) action panel mounting push to make switches. Supplied with fixing nut & washer 7mm cut out. External Diameter:10mm External Length / Height:28mm

These LED's are sold singly.

This power supply unit plugs directly in to a standard13A mains socket. Maximum power rating 24W, suitable for use with the 24 volt versions of the Antex C, M, CS or XS irons.

Low cost miniature transistor oscillator buzzers with flying leads. Ideal for educational projects and general purpose use. Frequency: 400Hz Sound Output: 75dB @ 30cm. Current: 30mA Dims: 23L x 17W x 15H Fixing Centres: 27.5mm Lead Length: 100mm

Solid state. Sound output 75dB @ 30cm. Frequency 400Hz. Fixing centres 27.5m.

Current Rating 10A Voltage Rating 250V(ac) Length 3m Colour Black Overview C13 to BS1363 Economy 10A Power cords suitable for office and light use environments. The BS 1363/A 13A fused mains plug has a riveted/welded construction and is non-rewireable. Cable fully tested and approved by ASTA and strain relieved at both ends. Range Overview IEC to BS1363 Plugs A range of electrical appliance connecting leads, the majority of which are terminated with connectors that conform to IEC 60320. The IEC (International Electrotechnical Commission) is the international standards and conformity assessment body. The 'odd' 'C' numbers refer to a socket type connector - mains input - and the 'even' 'C' numbers refer to a plug type connector - the appliance inlet.

Ultra slim, pre-mounted e-textile LEDs run off a 3V coin cell battery and are illuminated continuously when powered. They have connections to which the conductive thread can be connected. These are clearly marked with '+' and '-' to indicate which is the positive and which is the negative connection.

Miniature low-cost toggle switches.

Mains Fuse 13 amp 240 volt

This sewable slide switch allows LEDs to be turned on or off in your E-Textiles project. It has 2 connection points to which the conductive thread is connected.

A red lead with stackable 4mm plug at each end, 500mm long, extra flexible wire. Max current 0.5A continue.

A black lead with stackable 4mm plug at each end, 500mm long, extra flexible wire. Max current 0.5A continue.

Solid state. Sound output 75dB @ 30cm. Frequency 400Hz. Fixing centres 27.5m.

10 leads in 5 assorted colours, typically 457mm length, with PVC insulated miniature crocodile clips at each end. Max current 0.5A continuous. Pack of 10

A range of low-cost wirewound controls, ideal for loudspeaker volume controls, miniature motor speed controllers, etc. Rated at 5 watts. Body Diameter: 24mm, Body Depth: 11mm, Spindle Diameter: 6mm, Spindle Length: 6.5mm (17 inc bush)

Lens ended MES bulb 2.2V 250mA.

250g reel of uninsulated Bare Copper Wire Dia. 1.626mm

Dimensions (HxWxD): 10.2 x 19.8 x 6.4mm. These include switch body and contacts but not roller and long lever.

British made 4mm stackable plugs. A 4mm socket is incorporated in the rear for in line stacking. Screw connection for wire. Rated 10A.

LED CLIPS Packs of 10 - 5mm clip single part.

Standard commercial quality 12 way terminal blocks. Polythene construction, easily subdivided, rated 380 V rms.

British made 4mm stackable plugs. A 4mm socket is incorporated in the rear for in line stacking. Screw connection for wire. Rated 10A.

With solder connection.

BS 1363. Fused, insulated pins.

With solder connection.

The Professional breadboard has contact positions identified by alphanumeric grids. The Professional also have colour coded polarity indicators. Size: 80 x 54mm with 400 tie points. Contact life: over 10,000 insertions.

Panel mounting SPST 10 amp 250V AC. panel cutout 19.3 x 13mm Terminals 4.8 x 0.8 crimp (D250-694)

Panel mounting with solder tag terminals. Supplied with On-Off indicator plate.

DPDT slide switch 22 x 13 x 12mm.

Single pole push-on/off press switch with screw terminal connections. Specifications: Rating: 2A @ 250VAC Panel cutout: 10mm. Max panel thickness: 3mm

11mm Round - 1.5 V 200mA

(4 Amps RMS, plastic case type TO126)

White plastic screw connections 30mm dia 19mm high.

DPDT 15 x 8 x 7mm.

The BC548B and BC639 are low cost alternatives to the BC108 and BFY51/2N3053 respectively. They match specification of the originalsalmost exactly. The pinouts are different but they can be made to fit existing circuits by bending the legs.

High quality LED's for PCB or panel mounting. Standard brightness.

High luminous output, Red/Pure Green/Blue flashing LEDs. White diffused and water clear types available.

DPCO has a centre off position.

A photoconductive cadmium sulphide LDR housed in TO-18 package 4.5mm dia. Cell resistance 20KW at 10 lux, 5KW at 100 lux. Dark resistance minimum 20MW Max dissipation 50mW, maximum voltage 100V dc.

Mild Steel Modelling wire. 1mm dia. 1/2 kg coil. Galvanized to resist corrosion - suitable for use outdoors.

4mm black stackable plugs pack of 5

4mm red stackable plugs pack of 5

5mm ultrabright white LED, pack of 10

5mm ultrabright Red LED, pack of 10

Pack of 10 minature LDRs

Simple push to make switch - pack of 10

Lever toggle switch SPST, pack of 10

Pack of 10 buzzers with leads 6V

Carbon film resistors pack 1000

Pack of 10 mains fuses