TSL - Technology

General-purpose drill, to drill steels with tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Size: 5mm Flute length: 52mm Length: 86mm

Latching emergency stop switch, red with yellow body, for foot/knee/palm.

Designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions, they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. • 1/4in Shank • Cutting Diameter: 6.0 mm 15/64in. • Cutting Length: 16 mm. • Shank Diameter: 1/4in.

Spare inserts for lathe tool 1/2inch

Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Dovetail: 12.7 x 13mm 1 x Straight: 6 x 20mm 1 x Straight: 12 x 20mm 1 x Straight: 16 x 20mm 1 x Flush Trim: 12.7 x 13mm 1 x Rounding Over: R7.9mm, 25 x 14mm 1 x Rounding Over: R9.5mm, 28 x 14mm 1 x Roman Ogee: R4mm, 25 x 12mm 1 x Core Box: R6.3mm, 12.7 x 10mm 1 x Cove: R6.3mm, 22 x 12mm 1 x 45° Chamfer: 32 x 13mm 1 x 90° V-Groove: 12.7 x 9mm

General-purpose drill, to drill steels with tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Size: 6mm Flute length: 57mm Length: 93mm

A strong rigid plastic push stick suitable for use with many machines. An essential safety aid for use on any machine with an exposed cutting blade. Length 420mm Height 70mm (At highest point) Width (At widest point) 10mm Weight 150g

• 5 piece set • Available in a range of different sizes - 6mm, 8mm, 10mm, 12mm or 16mm • Lathe tools complete with replaceable tips • Also included are tip removal tools and spare screws to replace tips • Supplied in wooden storage case

A choice of bar type or precision adjustment hardened sliding jaw type.

The use of Trefolex will increase the life of taps and dies. It will also improve the quality of threads and reduce the effort required to cut them.

Circular die stock for 13/16inch O.D dies.

Fire Brick measuring 9 x 4.5 x 3inch

Mitre block 9inch long beech construction with accurate slots. RST.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

As a box pan folder, a unique feature of this model for forming box ends is the use of standard steel angle cut as required for work clamping rather than conventional segments. A narrow bed assures that return bends are made with the workpiece suspended insude the folder. • Interrupted folds • Return bends • Box ends • Brackets and channels • Scrolls and cylindrical shapes

Floor stand for Gabro BF620.

13/16inch O.D.

13/16inch O.D.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

13/16inch O.D.

Optional stand for the Puma 60 vinyl cutter. Supports the II, III and IV versions.

Fit most Hewlett Packard 7000 series plotters and Roland CAM1, DXY, DPX & GRX 300, 400 series and Bobcat, Puma, Lynx Bengal, and Jaguar Cutter/Plotters. Plastic-tipped disposable cartridges filled with water soluble, non-permanent ink for use on plotter paper and film.

Pack of 5 cutters for CAMM-1

Pre-Filter for the BOFA AD-400 extractor.

Combined filter for BOFA AD-400 extractor.

Tape is applied to face of vinyl using pressure by rubbing. Tape and selected vinyl is carefully peeled away from backing and placed onto material. Pressure by rubbing is applied over the tape. Tape is then peeled away leaving vinyl on material. Supplied in 100 metre rolls. Store application tape in a cool, dark place.

Lens Cleaner is specifically formulated (Alcohol, Ammonia and Detergent Free) to safely remove Finger Prints and Water/Oil based contamination from optical surfaces without streaking. Most Lens cleaning Solutions are alcohol based and Alcohol by itself is not suitable to remove stains/spots and always leave streaks behind. Use Lens Cleanâ„¢ with VisibleDust Ultra-Fine Micro fibre Cleaning Cloth or soft lint-free cloth. This 30ml size lens cleaner is small and portable.

Pre-Filter labyrinth F8/F9 for Purex 400i fume extractor

Replacement grid style cutting bed for Mercury & X252 Laser Cutters. Replace when your existing grid bed is heavily discoloured and dirty from general use.

Replacement auto focus probe for the following laser cutters: LaserPro Mercury LaserPro Explorer LaserPro X252 LaserPro Venus

Pack of 100 lint free lens cleaning papers for cleaning your Laser mirrors.

Pack of 100 cotton buds for Laser cleaning.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 6mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 9.5mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2362 x 9.5mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2362 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

This blade can be supplied in lengths up to 2743mm (9ft) and 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3580 x 12mm (6tpi) 6tpi - skip teeth & are best for cutting timber

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 9.5mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2895 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2895 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

3675mm x 1/2inch (4tpi). For TS440.

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

Selection of saw blades (60pcs) For wood, plastic and metal