TSL - Technology

Sheet size is 500 x 500mm, with a thickness of 02swg (0.9mm)

Sheet size is 1000 x 500mm, with a thickness of 20swg (0.9mm)

Sheet size is 500 x 500mm, with a thickness of 22swg (0.7mm)

Sheet size is 1000 x 500mm, with a thickness of 22swg (0.7mm)

The resins used in bonding Medite Exterior MDF contain no formaldehyde. This results in very low emission rates due only to the natural wood itself. Suitable for use on a laser cutter. You may need to tape the sheet down for acurate cutting. Pack 0f 6 600 x 400 x 9mm sheets. PLEASE NOTE: While every effort is made to ensure that all sheets are completely flat, due to the manufactured size and thickness, some sheets may be slightly bowed. To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion.

Grade E1 low formaldehyde content. Less than or equal to 8mg to100g of product. Pack of 6 sheets. Approximate sheet size 600 x 400 x 4mm To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion. Not recommended for use on a laser cutter.

Sheet size is 500 x 500mm, with a thickness of 22swg (0.7mm)

The resins used in bonding Medite Exterior MDF contain no formaldehyde. This results in very low emission rates due only to the natural wood itself. Suitable for use on a laser cutter. You may need to tape the sheet down for acurate cutting. Pack 0f 6 600 x 400 x 6mm sheets. PLEASE NOTE: While every effort is made to ensure that all sheets are completely flat, due to the manufactured size and thickness, some sheets may be slightly bowed. To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion.

Score before bending to produce a plastic hinge that can be folded millions of times. It is virtually impossible to tear, resistant to water, oil, most chemicals and high temperatures. Translucent finish.

Sheet size is 1000 x 500mm, with a thickness of 22swg (0.7mm)

Score before bending to produce a plastic hinge that can be folded millions of times. It is virtually impossible to tear, resistant to water, oil, most chemicals and high temperatures. Translucent finish.

Score before bending to produce a plastic hinge that can be folded millions of times. It is virtually impossible to tear, resistant to water, oil, most chemicals and high temperatures. Translucent finish.

Sheet size is 500 x 500mm, with a thickness of 22swg (0.7mm)

Sheet size is 1000 x 500mm, with a thickness of 20swg (0.9mm)

Sheet size is 1000 x 500mm, with a thickness of 18swg (1.2mm)

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Pack contains 2 each of white, red, green & blue, 1 each of yellow & black in 3mm thickness. This material is Not suitable for use on a laser cutter.

Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Pack contains assorted 5 sheets of 1220 x 610 x 5mm thick sheets. This material is Not suitable for use on a laser cutter.

Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.

• Quality reprocessed grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.

Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 6mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 10mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

This is a very high density material with a close structure. Suitable for prototyping, modelling, patterns and CNC milling & cutting. It is strong and provides good surface detail and can also be used as a mould for vacuum forming. Modelling board can be both painted and glued. Sheet size: 250 x 250 x 30mm

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

Blue in colour and is completely non-toxic. For general prototype work and for lost wax casting. Dimensionally accurate, has a good surface finish it can be turned, drilled, milled, threaded, sawn, moulded, carved and polished. However, because it is self-lubricating and has plenty of give, it will not damage machine tools or their operators. Plastic Wax is recyclable. Details of how to do this are provided with the product.

Aluminium tubing in 300mm lengths 6mm outside dia. 5mm inside dia. Pack of 2

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality reprocessed grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

• Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour

Cabinet rasp 250mm

Second Cut 200mm

Impact resistant, high-quality ABS plastic body. Rear body removes for access to blade carrier and snapping slot. Secure multi-position slide button. Pocket clip. 9mm blade.

The curved claw head is made from forged, heat treated steel and the oval tubular steel shaft combines strength with a lightweight feel. The flock filled vinyl grips are impervious to heat, oil and most solvents.

Needle Files No.2 Cut

Plastic file handles. Sold in packs of 10.

Second Cut 250mm