Machinery

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2895 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2895 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

3675mm x 1/2inch (4tpi). For TS440.

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

Selection of saw blades (60pcs) For wood, plastic and metal

Wood lathe extraction kit containing everything required to connect a wood lathe to our extraction system including scoop hood, frame assembly, ducting and fixings.

This blade can be supplied in lengths between 3656mm - 3962mm (12-13ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

This blade can be supplied in lengths between 3656mm - 3962mm (12-13ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• Fully hardened high carbon steel bit • Precision ground tri-point bit for a clean cut and reduced splintering • Sizes: 10, 16, 20, 22, 25 and 32mm bits • For drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass • For use with drills, drivers and hand braces Pack of 6.

• Machine Type - Medium /Bench or Pedestal • Method of attachment - Secures around depth stop collar using fixing top to suit configuration • Positive Manual latch • Flip up with spring retention • Construction - Aluminium/Nylon with Polycarbonate Vizor which encloses the work area • Operation - Telescopes on contact with work piece, length adjustable vizor Please state collar size when ordering. Maximum chuck dia. for the MT is 63mm / MTS is 70mm.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area Collar size: 62.5mm

Meddings drill guard to fit Meddings Driltru: L1 L2 M2 M4 & MV4. Clamp diameter for Drill guard 64mm.

• Machine Type - Medium /Bench or Pedestal • Method of attachment - Secures around depth stop collar using fixing top to suit configuration • Positive Manual latch • Flip up with spring retention • Construction - Aluminium/Nylon with Polycarbonate Vizor which encloses the work area • Operation - Telescopes on contact with work piece, length adjustable vizor Please state collar size when ordering. Maximum chuck dia. for the MT is 63mm / MTS is 70mm.

M2 Min-Max Vertical height: 250-450mm Overall length - enclosed: 475-800mm Overall length - extended: 925-1250mm Please note: We require T-slot size to match this product to your machine.

Spare vizor for BT Drill guard (590-204 & 590-204X). Constructed from scratch resistant polycarbonate.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area The maximum collar size for the BT is 70mm (minimum 40mm). Please state collar size when ordering.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area Collar size: 64mm

A range of accessories for use with any extractor. Jubilee clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc. BZP Size 5 Adjustment . 90 - 120mm Adjustment. 3.1/2 - 4.3/4in

A cartridge filter for the Woodvac TS100.

Filter bags for WV150 Pack of 6

Pack of 5 standard poly waste bags. Size 915mm x 812mm (36"" x 32"").

Used for Hegner Multicut scrollsaw and extraction installations to connect a Multicut to a dust extraction system for optimum dust removal.

Contents: LH Turning Tool 12mm Shank RH Turning Tool 12mm Shank Pack of 10 Inserts for LH/RH Turning Tools Parting Off Tool 12mm Shank with 10 Inserts External Threading Tool 12mm Shank with 10 Inserts Boring Bar 8mm Shank with 10 Inserts 5mm Centre Drill 2 Stub Drills (5mm & 10mm) 4 Turret Bushes (2 x 5mm, 8mm & 10mm)

These switches can be mounted conveniently as foot / knee / palm switches and wired into the machine by a competent electrician. • Ingress protection to Ip67 • 1 N/O, 1 N/C contacts (10A) • 5 x PG13 cable entries (1 threaded) • IEC418 tamperproof, UL and CSA approved Dimensions: 94mm x 94mm

Programmable spindle speeds and feedrates make the Turn 270 Pro ideal for cutting a range of resistant materials such as wax, plastic, acrylic, free cutting alloys, aluminum and steel. THE TURN 270 PRO COMES AS STANDARD WITH: • VR CNC Turning Operating Software (PC not included) • QuickTURN 2D Design Software (1 seat) • Quick Change Toolpost and Holder • Manual Self Centring 100mm 3 Jaw Chuck • Installation and Instruction Manuals • USB Connection

• Machine Type - Light /Bench or Pedestal (dedicated to machine make) • Method of attachment - Clips to back pillar • Positive Manual latch or interlock • Side opening • Construction - Mild steel with 4 mm polycarbonate vizor • Operation - Remains stationary allowing depth stop collar and chuck to pass through length adjustable vizor

These holesaws cut perfect holes in a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills. Supplied in a sturdy case for safe and secure storage. Contains: 12 x Varipitch Holesaws: 16, 20, 22, 25, 32, 35, 38, 44, 51, 64, 70, and 76mm. 1 x 3/8in Arbor (14-30mm). 1 x 7/16in Arbor (32-152mm). 1 x Arbor Adaptor. 1 x 300mm Extension Bar. 1 x Aluminium Case.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (6tpi) 6tpi - skip teeth & are best for cutting timber

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 6mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 9.5mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• Machine Type - Light/ Bench or Pedestal • Method of attachment - Side fixing or clips to back pillar • Positive Manual latch or interlocked • Side opening • Construction - Moulded 5mm polycarbonate body, with 4 mm polycarbonate vizor, adjustable to suit machine depth stop bracket • Operation - Remains stationary allowing depth stop collar and chuck to pass through length adjustable vizor

• Machine Type - Light to medium centre lathes • Method of attachment - Secures to face or top of lathe headstock • Manually adjusted to cover work area. Interlocked • Construction L6 - Cast aluminium and 4 mm polycarbonate visors • Construction L12 & L18 - Mild steel, P.V.C. skirt, 6.6 nylon pivot bushes and 4mm polycarbonate visors • Operation - Hinges to allow access to chuck and work area

315mm Dia, 30mm bore. For accurate sizing and trimming timber and manmade boards. Supplied with standard pinholes including Sedgwick and Scheppach.

315mm Dia, 30mm bore, 14mm pinhole. General purpose giving superior finish for both ripping and crosscutting applications. Supplied with standard pinholes including Sedgwick and Scheppach.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3580 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

For Craft & Supercraft chucks.

This set enabls the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Tungsten Carbide tips ensure long life and the sturdy aluminium storage case provides a safe place to store the bits when they are not being used. Contents: One of each Dia Depth Straight Cutter 5.0mm 12mm Straight Cutter 6.0mm 20mm Straight Cutter 8.0mm 20mm Straight Cutter 10.0mm 20mm Straight Cutter 12.0mm 20mm Straight Cutter 14.0mm 20mm Straight Cutter 16.0mm 20mm Straight Cutter 18.0mm 20mm Straight Cutter 20.0mm 20mm Dovetail Cutter 12.7mm 13mm 90 deg V cutter 9.5mm 9mm 90 deg V cutter 12.7mm 9mm Core Box 3.2mm Rad 6.0mm 6mm Core Box 6.35mm Rad 12.7mm 10mm Classical Pannel 12.7mm 9mm Guided Flush Trimmer 12.7mm 13mm 25 deg Guided Chamfer 16.0mm 9mm 45 deg Guided Chamfer 32.0mm 13mm Roman Ogee 4mm Rad 25.0mm 12mm Guided Rabbeting Cutter 28.6mm 13mm Guided Cove 6.35mm 22.0mm 12mm Guided Cove 9.5mm 28.0mm 12mm Guided Rounding over 3.2mm Rad 15.0mm 7mm Guided Rounding over 6.35mm Rad 22.0mm 12mm Guided Rounding over 7.9mm Rad 25.0mm 14mm Guided Rounding over 9.5mm Rad 28.0mm 14mm Guided Beading 3.2mm Rad 16.0mm 8mm Guided Beading 6.5mm Rad 22.0mm 12mm Guided Beading 7.9mm Rad 25.0mm 14mm Guided Beading 9.5mm Rad 28.0mm 15mm

Bagpress MiniPressMkII - BPEL02 The level of vacuum achievable is 70% which equates to around 620kg per m2. Vacuum flow rate - 0.4m3 per hour Vacuum level - 85% - 8.5 tonnes per m2 Standard bag size - one bag @ 800mm x 1300mm Maximum bag size - 1300mm x 1300mm

A low temperature material which is very easy to mould and gives a slightly flexible moulding. Surface gloss is acceptable but not as good as Polystyrene. Melting temperatures: Elastic - 100°C / Plastic - 170°C / Degrade - 220°C

For use with vacuum press systems. Sheet Size: 488mm x 305mm Assorted species. Pack will contain 5 sheets of a selection of woods such as Ash, Cherry, Maple, Sapele & Walnut. Paper backed.

Polish for non-grained hard plastics, plexiglass or macrolon, polyester and acryl. 1 litre.

Bars are approximately 0.9kg unless otherwise stated. Specifically for plastic such as acrylic. 0.8kg bar.

For spindle polishing machines. Made from white cotton with 60 folds giving a mop approximately 1inch wide. Available either stitched for hard use or unstitched for finishing.

For spindle polishing machines. Made from white cotton with 60 folds giving a mop approximately 1inch wide. Available either stitched for hard use or unstitched for finishing.