TSL

Heavy duty belts for use on wood, plastics & fillers. Sold singly. Size - 1090 x 150mm

315mm Dia, 30mm bore, 14mm pinhole. For accurate sizing and trimming timber and manmade boards. Supplied with standard pinholes including Sedgwick and Scheppach.

Manufactured from high quality 1mm carbon steel, that's been correctly hardened and tempered to ensure the blades strength and straightness while the double ground set of the saw tooth delivers a faster saw cutting performance with optimal sawdust removal in both forward & reverse motions. The finely ground handsaw blade is coated with an ultra-tough lacquer protecting the saws blade from corrosion, whilst easing friction when sawing. The blade is ultrasonically welded to a bespoke ergonomic soft grip handle with a ridge free finger support achieving precise cutting and user comfort, even when used for prolonged periods.

Quality Hardwood Dowel from sustainable sources. Pack of 10, 4mm diameter, 600mm long. Nominal size ± ½ mm.

With 60 assorted rivets.

100 1/8 Long Grip Aluminium Pop Rivet

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole.

Extends the life of sanding belts, discs and sheets, and removes clogging simply and efficiently. 150 x 25 x 25mm.

Nickel plated. Pk/50

High-quality nickel-plated steel split rings. Packs of 100.

This pack contains:? A sample of Polymorph low temperature polymer? A length of smartwire (shape memory alloy) ? A sheet of thermochromic film (liquid crystal technology) ? A sample of lenticular sheet ? An IQ controller (self contained programmable controller)? A brief guide and suggestions for experiments

soLID core - Rated: 1.8A @ 1000V RMS max. size 1/0.6mm. 100 metre reel

For all Antex and most other brands of soldering iron. This stand is adjustable for the model of iron used. It is made from high grade phenolic, has slip resistant feet, and a ballast weight for stability.

soLID core - Rated: 1.8A @ 1000V RMS max.size 1/0.6mm. 100 metre reel

Supplied with a solid refractory hearth with robust side and rear heat shields, the DS400 complies with British Gas standards and is a fully failsafe system. All sequences are visually displayed using neon indicators. On start-up the gas train, hoses and torches are tested for escaping gas. Leaks from any component will result in a continuously illuminated red neon and the main flow of gas will be prevented from entering the system. • Perfect for use in school design technology workshops or industry use, i.e. jewellery workshops. • Easy-to-use RF80 brazing torch allows one-hand operation • A solid refractory hearth with robust side and rear heat shields • A fully fail safe system, compliant with British Standards • All sequences are visually displayed using neon indicators

The forge has a single phase whisper quiet integral fan to provide the air supply and takes only 15 minutes to reach a working temperature. It can reach a temperature of 1,500°C. It has a 340mm diameter working area and can work up to 50mm steel bar. The ceramic chip technology minimises surface scale formation. The forge has a single phase whisper quiet integral fan to provide the air supply with fail safe auto ignition for the gas supply. The forge has a cast iron base for a long maintenance free life. • Push-button no-volt release starter • Requires manual restart after power failure • Ceramic Hearth • Automatic safety check of controls and air fan • Full manual control of hearth conditions • Whisper quiet air blower fan • Indicator status lights • Gas non-return valve • 12.5kg of ceramic chippings • Operation / Instruction manual • Side and rear heat shields • Rake iron • Can be run on either Natural Gas or LPG bottled gas

The forge has a single phase whisper quiet integral fan to provide the air supply and takes only 15 minutes to reach working temperature. It can reach a temperature of 1,500°C. It has a 340mm diameter working area and can work up to 50mm steel bar. The ceramic chip technology minimises surface scale formation. The brazing hearths both have an area of 0.23 square metres with heavy duty refractory bases. One or both of the RF80 brazing torches, which deliver up to 80,000BTU of heat output, can be replaced by Flamefast RF10 jewellery torches for fine work. All Flamefast RF torches have a single hand-wheel control to give ease of flame control and a constant flame pattern over the range of flame sizes. The torches are ignited electronically. • Especially useful where space limitations are a consideration • Unit consists of a ceramic chip forge and two brazing hearth usually equipped with 2 Flamefast RF80 brazing torches • Can be run on either Natural Gas or LPG bottled gas • Shown with Varivac extraction canopy

Tilt & pour feature provides safer metal pouring and extended crucible life. Standard equipment: • Piezo ignition and flame failure device • Super efficient insulation • A10 capacity crucible pot • Crucible lid • Tilt handle • Pouring gauge • Degassing plunger • Skimming ladle/dross lifter • Safety burner • Cut-out prevents burner from operating when the drum is tilted • Operation/Instruction manual

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • Popular all round laser engraver with stable and satisfactory performance • Intuitive control panel allows easy operations • Low maintenance motion system • Emergency button and key-switch add an extra layer of safety WARRANTY INFORMATION 24 months machine and laser tube warranty. Additional 12 months warranty on machine and laser tube is available.

Polylactic acid (PLA) is a biodegradable thermoplastic derived from renewable resources.

Printer Compatibility • METHOD 3D Printer • METHOD X 3D Printer* • METHOD X Carbon Fiber 3D Printer Extruder Compatibility • Support 2 Extruder

Pre-Filter Labyrinth F6 for Purex 300i fume extractor.

Create eye-catching graphics at speeds of up to 1020mm/second (40.2 inches/second). It has 500g of cutting force a tracking ability of five metres (16.4 feet). Puma IV is powered by a digitally controlled servo system and the Accu-alignment system II which comes as standard allows for precise contour cutting of digitally printed graphics by detecting the registration marks. Enhanced AAS II Contour Cutting System The Puma IV series features a standard Automatic-Aligning System(AAS II) to guarantee precise contour cutting by detecting the registration marks on digitally produced images. Includes Great Cut software 1-year on-site warranty

The Cameo 4 has had a complete make over, new aesthetic, sliding lid and a compact design make it the prefect desktop cutting system for home or small business. The Cameo 4 provides the user with more cutting functions than ever before with inclusion of 3 brand new blade types: • Rotary Blade • Kraft Blade • Punch Tool With wireless Bluetooth connectivity and a familiar 12″ cut width the Cameo 4 is the perfect desktop cutting tool for the serious crafter, small business or model maker.

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • QSM (Quality Speed Mode) maintains 100% engraving quality while operating at maximum speed • Patented SmartACTTM motion control technology increases your productivity by reducing ramping process and job running time • Drag and engrave feature assures remarkably easy and fast set-ups • High speed DC motor runs up to 80ips for precise and rapid movement of the laser carriage • Reliable DuraGuide motion system with reinforced Kevlar belt delivers superb output quality • This machine is fi tted with the Smart Guard Fire Alarm and auto-cut out on extraction failure as standard WARRANTY INFORMATION 3 year machine warranty, 15 month tube warranty

Combined HEPA/Gas filter for BOFA AD1000/iQ

Deep pleat pre-filter for AD1000/iQ

PVA (Polyvinyl Alcohol) is a water soluble support material for multi-extrusion 3D printing. With a good thermal stability, Ultimaker PVA is ideal for printing complex models that require supports for large overhangs, deep internal cavities, and intricate geometries. Designed for a seamless 3D printing experience, our PVA provides good adhesion to both PLA and Nylon. • Good thermal stability resulting in better degradation resistance compared to other PVA filaments • Less moisture sensitive than other PVA filaments • Great adhesion to both PLA and Nylon • Safe dissolution in tap water (no harmful chemicals required) • Biodegradable with no hazardous by-products PVA allows to effortlessly create complex 3D prints by building water soluble support structures. 1. Submerge. Put your 3D print in cold or warm water depending on the build material. 2. Rinse. After PVA supports are dissolved, rinse the 3D print to remove any excess PVA solution. 3. Dry. Let the 3D print dry and apply additional post processing to the build material if necessary. As a water soluble support material, Ultimaker PVA empowers engineers and designers to create highly detailed surfaces and complex moving mechanical parts in just one run. Coupled with the right build materials and our proven material profiles in Cura for Ultimaker 3, our PVA opens up a whole new world of opportunities for intricate designs and versatile applications.

• A constant temperature to prevent warping (detachment of the part) and facilitate 3D prints that require difficult-to-print materials (ABS, PC) • The air is replaced using a professional fan and HEPA filter • No more draughts during printing • The cover can be installed and uninstalled easily without damaging the printer. No screws or drill needed; simply clip on the kit • A latch closes the door and protects prints from any outside access. This latch is particularly useful in an educational context to protect high-temperature parts • No odour or smoke escapes from the printer thanks to the HEPA filter which has a working life of between 600 and 1200 hours depending on the materials and print settings

The Ultimaker S3 is a complete production system you can depend on in the office or studio. With advanced features to ensure a reliable printing experience, it's still simple to use thanks to its award-winning touch interface and seamless software integration. • Dual extrusion with a build volume of 230 x 190 x 200 mm (9 x 7.4 x 7.9 inches) • Down to 20 micron (0.001 inch) layer resolution • Open filament system, compatible with glass and carbon fibre composites • Dual filament flow sensors notify you if material runs out • 4.7-inch touchscreen interface Winner of iF Design Award 2019

For high precision cutting of medium and heavy duty materials.

With snap connectors.

Low cost batteries with a shelf life of 2 years and are suitable for low drain applications. Pack of 2.

4mm black stackable plugs pack of 5

4mm red stackable plugs pack of 5

5mm ultrabright white LED, pack of 10

5mm ultrabright Red LED, pack of 10

Pack of 10 minature LDRs

Simple push to make switch - pack of 10

Lever toggle switch SPST, pack of 10

Pack of 10 buzzers with leads 6V

Carbon film resistors pack 1000

Pack of 10 mains fuses

This heavy duty A3 laminator features a double heating system utilising a hot roller and plate, providing high quality lamination. It also features clear instructions on the front of the product and a digital display for precise settings. With an operating speed of 465mm per minute, this product also features an anti-jam reverse function, helping to keep your workstation running smoothly.

Ideal for use with wood chisels. Size: 115mm

Reduces the standard forming area of the C R Clarke 750 vacuum former from 482 x 432mm to 228 x 216mm.

Pack of 10 assorted diameters, 2 each of 5, 6, 8, 10 and 20mm.

Nine speeds Vee belt drive Head tilts left to right, calibrated to 45° 360° rotation on horizontal axis One shot lubrication system to slideways and leadscrews to ensure prolonged machine life Choice of spindles - R8 or 3MT • Choice of either metric or imperial leadscrews • Traditional design with elevating knee, supported on double dovetail vee ways to ensure positive alignment • Tapered gibs to X, Y and Z axes • Rack and pinion feed and calibrated fine feed to quill • Locks to X, Y and Z axes • Interlock belt guard • Cabinet stand included. •New! LED lighting

The rip fence is aluminium section allowing for two working positions (ripping and angled ripping). It is fixed to a cast iron mounting bracket for rigidity and has integral micro adjustment. A telescopic extension arm is fitted to the cross cut fence for setting the timber stop. The 620mm Cross Cut Table is designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming. It has a maximum depth of cut 105mm @ 90° and 76mm @ 45°, double sided saw guard with dust extraction outlet, enclosed drive mechanism. Supplied with an anti kick saw blade. Thermal overload, no-volt release switch, lock off emergency stop switch and foot operated foot switch are fitted as standard. Fitted with keyswitch.

The hand-wheel is made from an ergonomically designed one piece casting for comfort of use whilst also providing additional weight to the headstock. These models come with 12 speeds making them ideal for drilling metal as well as wood. MT2 arbor No volt release switch Complete with 16mm chuck We strongly recommend footstop switches are added to these machines to comply with BS4163:2007.

It features 140rpm wheel speed, force-fed recirculatory coolant systems and a tool holder that accepts up to 60mm wide blades. The centre swivel arm has fine adjustment control to ensure that the tool edge and grinding wheel remain in perfectly flat contact. Safety features include a no-volt overload pushbutton starter, large foot stop switch and an automatic safety cut-out if the front door is opened whilst the machine is switched on. KEY FEATURES • Controlled 140rpm wheel speed • Force-fed recirculatory coolant system and anti-spill tray • Integral oil reservoir with filter • Tool holder for blades up to 60mm wide • Radius gouge attachment • Centre swivel arm with vernier adjustment

Fixing kit for 7inch vices.

The head itself is counterbalanced by a weight, giving fingertip control to the rise and fall and eliminating the breakages associated with spring type mechanisms. Its 1.1kw industrial fan cooled motor provides ample power for continuous duties and is fitted with a fully guarded adjustable chuck. Unlike a collet type system the chuck holds the auger firmly round its circumference, true to the centre line of the chisel, securing longer tool life and better cutting capability. The table has longitudinal and lateral movement on a single handwheel, not only for ease of operation, but also for more precise positioning: lateral adjustment of the table being better controlled by a central screw. The angled timber clamp is adjustable on a tee slot, to give a maximum timber width of 200mm. Coupled with the height adjustable chisel head which can give a maximum timber height of 255mm underneath the chisel, the Sedgwick 571 has exceptional capability. For repetition work there are longitudinal stops along the front of the table, a marking out rail complete with turnover stop along the rear; and 2 position depth stop for haunching. The switchgear has no volt release, thermal overload protection, and a mushroom headed stop button.

This bench is fitted with a beech top. Standard sizes 1800mm long, 760, 810 or 910mm wide and 810 or 860mm high. A maximum of 4 metalwork vices can be fitted (sold separately).

Replacement filter (spring type set) for the TSUB dust extractor.

Replacement main filter for the TSMB dust extractor.

Replacement after filter for the TSMB dust extractor.

Replacement filter for the TSPL dust extractor.

Replacement filter for the TSHS dust extractor.

Includes filter moitoring system to help identify when filters need replacing. Large dust collection tray and filter shaking mechanism.

Metal framed bench with a beech top and fitted cupboards underneath, a maximum of 4 metalwork vices can be fitted (not included). HxWxD: 860 x 810 x 1800mm.

The 6x 68mm deep drawers provide ample space for A1 size paper and slide on easy-glide runners to ensure smooth action even on when drawers are heavy with paper or card. Modern bow handles, finished in silver, stylishly complement each drawer providing a sturdy grab point on each drawer when sliding them out and back in. Steel legs, powder coated in a deep charcoal black, neatly frame the drawers beautifully and look superb and also match the black finish on the inside of the drawers. Available in grey, light oak or beech.

Suitable for small power tools. • Single motor • Two stage filtration • Supplied with hose

For use with your RICOH SG 3110DN

Black Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 42ml

Cyan Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Magenta Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Yellow Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 29ml

Black Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 75ml

Cyan Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Yellow Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Magenta Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Contains: • A4 Virtuoso SG500 Printer for Sublimation • 4 x Sublijet Virtuoso HD Standard Cartridge, Black 42ml, Cyan, Yellow, Magenta 29ml • Adkins HPD A4 Clam Heat Press • 2 packs of sublimation paper • 2 x rolls of Heat Tape The included True Pix paper is suitable for all standard sublimation printables, if you wish to sublimate onto soft plastic sheets such as the special vacuum forming sheets, please use the special sublimation paper available separately (535-114 & 535-115).

Sublijet Virtuoso HD Standard Cartridge 42ml Black

Sublijet Virtuoso HD Standard Cartridge 29ml Cyan

Sublijet Virtuoso HD Standard Cartridge 29ml Yellow

Sublijet Virtuoso HD Standard Cartridge 29ml Magenta

Sublijet Virtuoso HD Cartridge 75ml Black A3 Virtuoso Printer Only

Sublijet Virtuoso HD Cartridge 68ml Cyan A3 Virtuoso Printer Only

Sublijet Virtuoso HD Cartridge 68ml Yellow A3 Virtuoso Printer Only

Sublijet Virtuoso HD Cartridge 68ml Magenta A3 Virtuoso Printer Only

• Virtuoso SG400 A4 Sublimation Printer • Premium Digital Clam Press 38 x 38cm • Virtuoso SG400 (A4) Install Kit HD Standard Cartridges • True Pix Sublimation Paper A4 - pack of 100 x 2 • 10mm Heat Tape (16m Roll) x 2

• A3 Virtuoso SG100 Printer • 4 x Sublijet HD Standard Ink Cartridges: 1 x Cyan 29ml 1 x Yellow 29ml 1 x Magenta 29ml 1 x Black 42ml

Buget A4 heat press used for sublimation printing.

10mm heat tape for sublimation. 33m long.

A4 sublimation paper 200 sheets

A3 sublimation paper 200 sheets

The SG500 A4 sublimation pinter, ideal for modest sized designs and comes with a starter set of inks and paper.

The SG1000 A3 sublimation pinter, ideal for larger sized designs and comes with a starter set of inks.

Sublimation ink for SG500 & SG1000 printers

Sublimation ink for SG500 & SG1000 printers

Sublimation ink for SG500 & SG1000 printers

Sublimation ink for SG500 & SG1000 printers

It has many unique features you find in more expensive bandsaws, including steel and die-cast alloy construction, solid ripping fence for straight cuts, a 100 / 195 mm cutting capacity, and powerful 300 watt motor. A variety of different blade sizes (3.0 – 12 mm) will give you the versatility to perform all types of straight, bevel, and intricate curved cuts in a variety of materials including wood, plastics, and alloy metal. Multi angle cuts are easy to perform with the standard mitre guide. • 3-roller precision guiding above and below the table • Upper saw blade guiding by toothed rack, adjustable in its height • Balanced band wheels with rubber facing • Sturdy cast-iron table, tiltable from 0° to 45° • Maximum cutting height: 100 mm • Throat: 195 mm • Precision ripping fence with magnifying glass, to be used at the left, as well as on the right side of the saw blade

Flush top with cupboards.

End cap for PECT trunking

The M300 Centre lathe is a full-function lathe capable of the entire range of turning operations it is equally at home in industry, vocational training or educational establishments. Compact and sturdy, the M300 centre lathe is easy to use and has the power to deal with heavy metal removal, at the same time offering precision for fine tolerance turning. Key Features • Easy selection of spindle speeds • Smooth power transmission and quiet running • Fast and simple changeover of spindle work holding equipment • Rapid action foot controlled brake with electrical disengagement. • Universal gearbox enables quick and easy selection of metric or imperial feed rates Specification M300 Lathe Distance Between Centres*635/1000mm Swing Over Bed330mm Spindle Speeds12 speeds (40 - 2500rpm) Spindle Bore40mm Spindle NoseD1-4 Camlock Centre Height167mm Cross Slide Travel210mm Height1.40m/1.45m Width1.68m/2.13 Depth97cm/1.02m Weight710kg/790kg Motor/Power2.2kw *Dependant on tailstock, centres and tooling specified

The PL-1340 is a gear head metal lathe that offers eight speeds that vary from 70 to 2000 rpm. The PL-1340 is powered by 220 volt single phase power which makes it available for those areas where power selection is limited. Key Features • Easy selection of spindle speeds • DRO as standard • 4-way quick change tool post with guard • 150mm 3 jaw chuck • Integrated coolant system Specification PL-1340 Lathe Distance Between Centres990mm Swing Over Bed330mm Spindle Speeds8 speeds (70 - 2000rpm) Spindle Bore38mm Spindle NoseD1-4 Centre Height165mm Cross Slide Travel160mm Height1500mm Width2006mm Depth838mm Weight740kg Motor/Power220V, 1 Phase 50Hz (1.5kw 2hp)

Powered by 220v single phase the Baileigh Industrial PL-1236E allows the operator to choose what voltage will suit their needs the best. Because of its versatile voltage options as well as the integrated digital readout, the PL-1236E is the perfect choice for education. The PL-1236E has an easy to use gear system that allows for taping, turning, and polishing with a range of 9 speeds from 70 to 1400 RPM. To ensure that all cuts are precise, all ways are ground and hardened to ensure long life. They also have adjustable gibs to make sure they slide as free as possible with no binding. • Distance between centres 914mm • 12inch (305mm) swing over bed • Digital read-out • 6inch three and 8inch four jaw chucks

Cotton/viscose, white, approx. 20g ball.