TSL - Technology

The rip fence is aluminium section allowing for two working positions (ripping and angled ripping). It is fixed to a cast iron mounting bracket for rigidity and has integral micro adjustment. A telescopic extension arm is fitted to the cross cut fence for setting the timber stop. The 620mm Cross Cut Table is designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming. It has a maximum depth of cut 105mm @ 90° and 76mm @ 45°, double sided saw guard with dust extraction outlet, enclosed drive mechanism. Supplied with an anti kick saw blade. Thermal overload, no-volt release switch, lock off emergency stop switch and foot operated foot switch are fitted as standard. Fitted with keyswitch.

The hand-wheel is made from an ergonomically designed one piece casting for comfort of use whilst also providing additional weight to the headstock. These models come with 12 speeds making them ideal for drilling metal as well as wood. MT2 arbor No volt release switch Complete with 16mm chuck We strongly recommend footstop switches are added to these machines to comply with BS4163:2007.

It features 140rpm wheel speed, force-fed recirculatory coolant systems and a tool holder that accepts up to 60mm wide blades. The centre swivel arm has fine adjustment control to ensure that the tool edge and grinding wheel remain in perfectly flat contact. Safety features include a no-volt overload pushbutton starter, large foot stop switch and an automatic safety cut-out if the front door is opened whilst the machine is switched on. KEY FEATURES • Controlled 140rpm wheel speed • Force-fed recirculatory coolant system and anti-spill tray • Integral oil reservoir with filter • Tool holder for blades up to 60mm wide • Radius gouge attachment • Centre swivel arm with vernier adjustment

Fixing kit for 7inch vices.

The head itself is counterbalanced by a weight, giving fingertip control to the rise and fall and eliminating the breakages associated with spring type mechanisms. Its 1.1kw industrial fan cooled motor provides ample power for continuous duties and is fitted with a fully guarded adjustable chuck. Unlike a collet type system the chuck holds the auger firmly round its circumference, true to the centre line of the chisel, securing longer tool life and better cutting capability. The table has longitudinal and lateral movement on a single handwheel, not only for ease of operation, but also for more precise positioning: lateral adjustment of the table being better controlled by a central screw. The angled timber clamp is adjustable on a tee slot, to give a maximum timber width of 200mm. Coupled with the height adjustable chisel head which can give a maximum timber height of 255mm underneath the chisel, the Sedgwick 571 has exceptional capability. For repetition work there are longitudinal stops along the front of the table, a marking out rail complete with turnover stop along the rear; and 2 position depth stop for haunching. The switchgear has no volt release, thermal overload protection, and a mushroom headed stop button.

This bench is fitted with a beech top. Standard sizes 1800mm long, 760, 810 or 910mm wide and 810 or 860mm high. A maximum of 4 metalwork vices can be fitted (sold separately).

Replacement filter (spring type set) for the TSUB dust extractor.

Replacement main filter for the TSMB dust extractor.

Replacement after filter for the TSMB dust extractor.

Replacement filter for the TSPL dust extractor.

Replacement filter for the TSHS dust extractor.

Includes filter moitoring system to help identify when filters need replacing. Large dust collection tray and filter shaking mechanism.

Metal framed bench with a beech top and fitted cupboards underneath, a maximum of 4 metalwork vices can be fitted (not included). HxWxD: 860 x 810 x 1800mm.

The 6x 68mm deep drawers provide ample space for A1 size paper and slide on easy-glide runners to ensure smooth action even on when drawers are heavy with paper or card. Modern bow handles, finished in silver, stylishly complement each drawer providing a sturdy grab point on each drawer when sliding them out and back in. Steel legs, powder coated in a deep charcoal black, neatly frame the drawers beautifully and look superb and also match the black finish on the inside of the drawers. Available in grey, light oak or beech.

Suitable for small power tools. • Single motor • Two stage filtration • Supplied with hose

For use with your RICOH SG 3110DN

Black Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 42ml

Cyan Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Magenta Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Yellow Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 29ml

Black Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 75ml

Cyan Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Yellow Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Magenta Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Contains: • A4 Virtuoso SG500 Printer for Sublimation • 4 x Sublijet Virtuoso HD Standard Cartridge, Black 42ml, Cyan, Yellow, Magenta 29ml • Adkins HPD A4 Clam Heat Press • 2 packs of sublimation paper • 2 x rolls of Heat Tape The included True Pix paper is suitable for all standard sublimation printables, if you wish to sublimate onto soft plastic sheets such as the special vacuum forming sheets, please use the special sublimation paper available separately (535-114 & 535-115).

Sublijet Virtuoso HD Standard Cartridge 42ml Black

Sublijet Virtuoso HD Standard Cartridge 29ml Cyan

Sublijet Virtuoso HD Standard Cartridge 29ml Yellow

Sublijet Virtuoso HD Standard Cartridge 29ml Magenta

Sublijet Virtuoso HD Cartridge 75ml Black A3 Virtuoso Printer Only

Sublijet Virtuoso HD Cartridge 68ml Cyan A3 Virtuoso Printer Only

Sublijet Virtuoso HD Cartridge 68ml Yellow A3 Virtuoso Printer Only

Sublijet Virtuoso HD Cartridge 68ml Magenta A3 Virtuoso Printer Only

• Virtuoso SG400 A4 Sublimation Printer • Premium Digital Clam Press 38 x 38cm • Virtuoso SG400 (A4) Install Kit HD Standard Cartridges • True Pix Sublimation Paper A4 - pack of 100 x 2 • 10mm Heat Tape (16m Roll) x 2

• A3 Virtuoso SG100 Printer • 4 x Sublijet HD Standard Ink Cartridges: 1 x Cyan 29ml 1 x Yellow 29ml 1 x Magenta 29ml 1 x Black 42ml

Buget A4 heat press used for sublimation printing.

10mm heat tape for sublimation. 33m long.

A4 sublimation paper 200 sheets

A3 sublimation paper 200 sheets

The SG500 A4 sublimation pinter, ideal for modest sized designs and comes with a starter set of inks and paper.

The SG1000 A3 sublimation pinter, ideal for larger sized designs and comes with a starter set of inks.

Sublimation ink for SG500 & SG1000 printers

Sublimation ink for SG500 & SG1000 printers

Sublimation ink for SG500 & SG1000 printers

Sublimation ink for SG500 & SG1000 printers

It has many unique features you find in more expensive bandsaws, including steel and die-cast alloy construction, solid ripping fence for straight cuts, a 100 / 195 mm cutting capacity, and powerful 300 watt motor. A variety of different blade sizes (3.0 – 12 mm) will give you the versatility to perform all types of straight, bevel, and intricate curved cuts in a variety of materials including wood, plastics, and alloy metal. Multi angle cuts are easy to perform with the standard mitre guide. • 3-roller precision guiding above and below the table • Upper saw blade guiding by toothed rack, adjustable in its height • Balanced band wheels with rubber facing • Sturdy cast-iron table, tiltable from 0° to 45° • Maximum cutting height: 100 mm • Throat: 195 mm • Precision ripping fence with magnifying glass, to be used at the left, as well as on the right side of the saw blade

Flush top with cupboards.

End cap for PECT trunking

The M300 Centre lathe is a full-function lathe capable of the entire range of turning operations it is equally at home in industry, vocational training or educational establishments. Compact and sturdy, the M300 centre lathe is easy to use and has the power to deal with heavy metal removal, at the same time offering precision for fine tolerance turning. Key Features • Easy selection of spindle speeds • Smooth power transmission and quiet running • Fast and simple changeover of spindle work holding equipment • Rapid action foot controlled brake with electrical disengagement. • Universal gearbox enables quick and easy selection of metric or imperial feed rates Specification M300 Lathe Distance Between Centres*635/1000mm Swing Over Bed330mm Spindle Speeds12 speeds (40 - 2500rpm) Spindle Bore40mm Spindle NoseD1-4 Camlock Centre Height167mm Cross Slide Travel210mm Height1.40m/1.45m Width1.68m/2.13 Depth97cm/1.02m Weight710kg/790kg Motor/Power2.2kw *Dependant on tailstock, centres and tooling specified

The PL-1340 is a gear head metal lathe that offers eight speeds that vary from 70 to 2000 rpm. The PL-1340 is powered by 220 volt single phase power which makes it available for those areas where power selection is limited. Key Features • Easy selection of spindle speeds • DRO as standard • 4-way quick change tool post with guard • 150mm 3 jaw chuck • Integrated coolant system Specification PL-1340 Lathe Distance Between Centres990mm Swing Over Bed330mm Spindle Speeds8 speeds (70 - 2000rpm) Spindle Bore38mm Spindle NoseD1-4 Centre Height165mm Cross Slide Travel160mm Height1500mm Width2006mm Depth838mm Weight740kg Motor/Power220V, 1 Phase 50Hz (1.5kw 2hp)