TSL - Technology

Grit: 80 Size: 915 x 100mm

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

Aluminium Oxide paper discs with a self adhesive backing which will stick to most surfaces. 60 Grit - Packs of 10

Heavy duty belts for use on wood, plastics & fillers. Sold singly. Size - 1220 x 150mm

Clear general purpose adhesive. These 250mm sticks can easily be cut with snips or knife to the length required. Sold in 5kg box (containing approx. 198 sticks).

Fast setting, extra strong weatherproof wood adhesive for interior or exterior use Complies with EN 204 Type D3 -weatherproof, water resistant wood adhesive. Suitable for all types of wood Dries to a clear finish No mess, clog-free nozzle and twist to seal cap Ready to use glue for internal and external use.

High quality woodworking adhesive and medium made for us to BS4071. Dilute with water to the desired consistency, suitable for gluing a wide range of materials from wood to card and paper. It washes from clothes.

Standard Glue Sticks 300 pack of 12

Cyanoacrylate super glue that bonds instantly. It requires great care as it bonds skin instantly. Debonder is available (D110-277) The safety dispenser provides one-drop control. Does not drip or run. Ideal for vertical, overhead or hard to reach surfaces. Bonds in seconds

An economical water based contact adhesive with similar properties to Impact 2. Works well on Styrofoam.

A special low-temperature stick 250mm long, oval in section. It will only fit the low temperature glue gun. Sold in packs of 10 sticks.

Dimensions (HxWxD): 10.2 x 19.8 x 6.4mm. These include switch body and contacts but not roller and long lever.

• Cone driven • Low maintenance wheel • Reliable mechanism • Ideal for large pots • Forward and reverse switch • 1/2hp motor • Aluminium wheelhead • Weight 40Kg

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1000°C External dimensions HxWxD: 250 x 200 x 210mm. Internal dimensions HxWxD: 130 x 120 x 70mm. 0.9KW Weight: 4.5kg Supplied with a batt (ceramic shelf)

Fibre glass clay bin. Holds up to 250kg of clay.

Keep your clay stored safely and usable for longer. Height - 1220mm Width - 920mm Depth - 640mm

• Easy to retro-fit to kilns without controls • Ideal for enamelling & jewellery • Single program • Heats at full power then soaks • Soak temperature & soak time can be reviewed or altered while firing • Delayed start facility • Power failure recovery • Selectable thermocouple types • Extensive kiln safety monitoring with alarm buzzer

The Gladstone Bailey wheel offers the studio and professional potter a wheel of unparalleled performance and versatility in a compact and user friendly design. The Bailey wheel has been designed to complement a European style of throwing with the wheel head set at a greater height than most wheels of this style allowing a more comfortable throwing position. The wheel powered by a super smooth 1/2 Hp drive that is controlled by a computer enhanced VF drive that due to its unique design can generate up to the peak equivalent of 1 Hp under heavy loads this enables the wheel to give constant smooth power throughout the speed range and is extremely quiet in operation. This wheel meets all current CE requirements and BSEN standards for electrical and mechanical safety. Technical Data Motor 0.37Kw (1/2Hp) AC industrial constant rated motor Operation Remote pedal speed control operation Speed 0 - 280 rpm Wheel Head 12"" dia Aluminium Alloy Splash Tray Large Capacity Moulded Plastic Width 470 mm approximately Height 680 mm approximately Length 630 mm approximately Weight approximately 37 Kgs Centering Weight 25 Kg of Clay Construction of Cabinet Precision laser steel chassis with powder coated finish

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 380 x 260 x 300mm Internal dimensions HxWxD: 200 x 160 x 90mm 1.2kW Weight: 8kg Supplied with a batt (ceramic shelf) We strongly recommend the enamelling kilns are used with a controller/programmer to prevent over-firing.

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 410 x 300 x 320mm Internal dimensions HxWxD: 230 x 190 x 120mm 2KW Weight: 14.5kg Supplied with a batt (ceramic shelf)

Front Loader Auto Damper & Heat Lock

The Pyro-Master tool has been designed to give excellent results when working with wood or leather. You can create pictures, decorate eggcups, key-rings, brooches, and name plates. Almost any wood or leather object can be personalised in this way. I's supplied with 10 branding tips, and 9 different drawing or shading tips, each tip will give you different results. A leather bookmark, leather fridge magnet, wooden keyring, and a wooden trinket box are also supplied with the kit. The iron is 25W with a PVC cable.

Quality scissors guaranteed for materials and workmanship.

Kiln furniture set (P5841)

Wedging bench with a soft wood frame sanded and polished to a high finish and a 20 mm Formica top. HxWxD: 760mm x 1200mm x 860mm Approximate weight: 50kg

Designed to meet the needs of the busy studio where both space and finance is limited. The compact Pugmill has an exceptional output for a machine of this size. An electronic overload starter and stop button is fitted as standard.

• Type R thermocouples fitted as standard on UK kilns • Adjustable clasp door locks fitted • Stainlesssteel surround • Brick to brick door seal • All kilns are fitted with a Harting socket for easy controller connection • Mains power indicator • Wired for singleor three phase connection • Roof and door vent asstandard for ventingof the kiln during firing and to aid cooling • Energy efficient • Furniture set available

Economy clock movement mechanism with integral hanger, fixing hardware and push fit hands. Designed to fit a 10mm diameter hole, maximum material thickness 8mm. Requires 1xAA battery.

Portable stands constructed of melamine faced MDF sized to fit our extraction units footprint. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. (HxWxD) 600 x 680 x 530mm.

Portable stands constructed of melamine faced MDF, to fit our extraction units. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. Illustration shows portable stand with ducted extractor. (HxWxD) 740 x 960 x 700mm.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applyingaerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A2 (model A200H) or A1 (model A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A2 size drawings/boards.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applying aerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A1 drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A1 size drawings/boards.

Chrome plated axle caps to retain wheels on axles.

Charcoal filter for A100H & A200S fume extractor.

Contains 3 particulate filters and charcoal filter.

Rubber bands in 450g boxes. Individual sizes and assorted.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Plastic second hands 65mm.

The air is exhausted at the rear of the cabinet via 100mm flexible ducting to the outside through a wall or window. A carbon filter is not fitted. Accommodates A1 size drawings/boards.

These clear plastic syringes are ideal for miniature pneumatic or hydraulic projects. They are graduated every 0.1ml and can be interconnected with the 1/8inch bore tubing and connectors

Plastic hour and minute hands.

For large gears 500mm long x 4mm dia. Copper coated steel axle

Black plastic bracket for 2mm or 4mm dia. axles, can easily be drilled to larger sizes. Glue or screw to the chassis.

Medium Turned Birch wheels have a 4mm axle hole. One side is dished, the other flat. Tight fit on 5mm dowel.

Medium Density Fibreboard (MDF) wheels are 6mm thick with a 4mm nominal axle hole except D560-145 (75mm) which has a 5mm nominal axle hole.

5mm (3/16inch) dia. Pack of 100.

A pack of 80 cams in four different sizes, 4mm thick, which are a tight fit on 3mm rod. Extra holes enable them to be turned in to cranks. Supplied on the sprue, assorted colours.

Made from metal with 2 flywheels and 2 gears. With 3 fixing holes. Drive axle 105mm x 4mm.

High quality plastic propellers, tight fit onto a 2mm shaft (D560-204 fits 1mm ) 560-202 is a pusher propellor, the others are pullers. Packs of 10