Timstar

Reaction heater block for round bottom flasks (one flask capacity), suitable for use with the hotplate stirrer ST150100. Made from solid aluminium, this block, when used with suitable hotplate, offer useful alternative to a heating mantle, making the hotplate/stirrer even more versatile. 100 mL flask size.

Compact, portable, solid plate design which is sealed against spillages with a durable easy to clean polished steel finish. Variable heat control from simmer to boil. •Cast iron hotplate •Variable heat settings •Overheat protection •Corrosion resistant •Power indicator •Easy clean finish •Non-slip rubber feet •Hotplate diameter: 185 mm •Power: 1500 W

This robust hotplate and magnetic stirrer is made of stainless steel with a ceramic to coating resist corrosion. It also has a separated safety circuit which will automatically stop heating when temperature reaches 350 degrees. The variable speed motor is designed to stay at a constant speed even during change in load. High magnetic adhesion ensures that the stirrer bar stays stable at the bottom of the container. It features an enclosed assembly with protection class IP42 and a DC brushless motor which guarantees long product life. A block heater, ST150115 is available as an accessory.

Designed with a microprocessor-controlled dual thermocouple, this hot plate offers accurate temperature control and protection from overheating. A coloured LED indicator surrounds the heat control knob illuminating the actual surface temperature in real time. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250-mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit also includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Includes an integral fitting for a retort rod and allows the retort base to slide underneath. This unit has a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.

This analogue hotplate offers a large heating area of 180 x 180 mm with safe controlled heating up to 400°C. Constructed from chemically resistant ceramic coated steel, this hotplate delivers excellent reliability with reproducible results at a sensible price. A screwed 12.5 mm screwed thread is included for the addition of a retort rod (not included).

2.2 kW fast boiling jug kettle, with automatic switch off when boiling and safety boil-dry cut out. Capacity: 1.7 L. Please note the kettle colour may vary.

White, 1.5 litre capacity food blender with removable stainless steel blades for easy cleaning. The unit has speeds, pulse function, and non-slip feet. 400 rating.

Comprising an aluminium lamp house on a flexible stem attached to a heavy base with in-line mains on/off switch. Maximum 40 W SES lamp bulb (not supplied). Complete with 13 A plug. Dimensions (H): 365 mm, base diameter 140 mm. Please note colour may vary.

A mains operated ultraviolet light source ideally suited to demonstration use. Comes complete with on/off switch. The tube is 450 mm long and is housed in powder coated steel with back reflector. Suitable for showing the fluorescing properties of chemicals (eg. washing powder) and for work in the new Forensic Science part of the syllabus. Emits UVA light.

The MP-100 measures the melting point of chemicals from ambient to 250°C. Samples need to be placed in a sealed end capillary tube and located in the heating block. Up to three tubes can be tested at one time. The heating rate can be adjusted manually between 1 to 20°C/min, and for rapid heating 10°C/min, to obtain an accurate melting point range. The sample and melt process can be viewed via the magnifying lens, which is illuminated by bright LEDs. Record the melt temperatures from the thermometer, positioned horizontal to the samples to allow simultaneous viewing. The lens can be detached for cleaning and simple to follow instructions are printed directly on to the unit, making it easy for students to use. For 220/240V. Dimensions (L x W x H): 370 x 140 x 110 mm.

Spare thermometer, spirit filled, to 250 °C.

Designed with safety and ease of operation in mind making it ideal for use in education. Two samples can be tested simultaneously. Built-in illumination and viewing magnifying lens give clear viewing of samples. •Temperature range: Ambient to 300°C. •Three digit LED display. •Range rates: 20°C/min to plateau and 2°C/min to melt. •For 220/240V. •Dimensions (L x W x H): 160 x 220 x 170 mm.

A glass apparatus with side tube to allow stirring by convection of heating liquid. Dimensions: 182 x 84 mm. I.D. 16 mm.

Designed with safety and ease of operation in mind making it ideal for use in education. Two samples can be tested simultaneously. Built-in illumination and viewing magnifying lens give clear viewing of samples. Temperature range: Ambient to 300°C. Three digit LED display. Resolution is to 0.1°C and temperature to melt is variable from 1-10°C. For 220/240 V. Dimensions (L x W x H): 160 x 220 x 170mm.

An aluminium block with an angled hole drilled to accept thermometer (not included). Dimensions (Diameter x H): 65 x 50 mm.

Soda Glass. Outside diameter 1.8-2.0 mm. Wall thickness 0.28-0.32 mm. In packs of 100.

Soda Glass. Outside diameter 1.8-2.0 mm. Wall thickness 0.28-0.32 mm. In packs of 100.

The SDS5032E is a general purpose 2 channel digital oscilloscope with large 200 mm colour display, making it ideal for education and industrial environments. Complete with USB output to PC. Specifications and Features: • Bandwidth: 30 MHz • Sample Rate (real time): 250 MSa/s (125 MSa/s per channel) • Memory depth: 10 KB • Maths functions: Add, subtract, multiply, division and FFT • 20 automatic measurements • Auto-scale function • Standard interface: USB, USB flash drive, LAN, VGA • Bandwidth: 30 MHz • Waveform storage: 15 waveforms • Vertical Sensitivity: 5 mV/div~10 V/div (at input) • Vertical resolution: 8 bit • Trigger Type: Edge, Pulse, Video, Slope • Trigger Mode: Auto, Normal, Single

The Spider power supply has been specifically designed for primary, middle and lower secondary school use. Offering 1.5, 3, 4.5 or 6 V smoothed and regulated DC at up to 1 A, it is the ideal next step from using cells and batteries. Four sets of terminals mean it can be used by four groups simultaneously enabling children to connect a multitude of low voltage electrical devices with the spider's bright LED's acting as power output monitors. •Manufactured in the UK •No batteries needed •4 x 4 mm output terminals •Compact and safe design •Fun to use

A compact power supply offering 2, 4, 6, 8, 10, and 12 V at currents of up to 5 A. Both DC and AC outputs may be used simultaneously up to the rated output. The output is protected by a push button cut-out. The unit is 2 A fused on the back panel and comes complete with a moulded mains lead and plug. 4 units are designed to fit in a shallow Gratnell tray. Specification •Input Supply voltage 230 V DC •Supply frequency 50 Hz •Mains fuse Rear panel 2 A, 20 mm quick blow Mains plug 3 A •Output Voltage 2, 4, 6, 8, 10, 12 V AC nominal 1, 3, 5, 7, 9, 11 V full wave rectified DC nominal •Maximum output current 5 A AC or DC •Manufactured in the UK

The Powerlock power supply has both lockable AC and DC outputs ranges by a simple key making it impossible for students to change the voltage. The Powerlock offers 2, 4, 6, 8, 10 and 12 V in both DC and AC. Outputs may also be used simultaneously up to the rated output required. For safety, the output is also protected by a simple push button cut-out. Supplied with 2 keys. •Output voltages AC & DC •2, 4, 6, 8, 10, 12 V range in AC and DC •Current 5 A •Voltage type - Stepped •Output type - Full wave rectified, non-regulated •Push button trip reset •Mains input 230/240 V AC, 50 Hz •Supplied with mains plug and lead •Manufactured in the UK

The Powerbase is ideal for use in physics, biology and chemistry experiments in secondary and sixth form schools. It comes with a sturdy, powder-coated steel case with fold flat carry handle making it easily stackable. A very popular power supply that has proven to last the rigours of daily use within schools with its tough construction and tamper proof fixings. •0-15 V AC and 0-20 V smoothed DC at up to 8 A •Combined Continuously variable output •Maximum voltage lock push button reset •Short circuit protection •Tough steel powder coated casing •Heavy-duty screw-in rubber feet •Stackable •Supplied with power lead •Designed and manufactured in the UK •5 Year Warranty

A highly versatile power supply for all low-voltage experiments, with continuous voltage adjustment, separate for DC and AC. The two outputs can be loaded simultaneously without interference. Four digital displays show DC and AC voltage and current. The continuously adjustable DC current limiter can be set using a screwdriver. There is an LED indicator to show when the selected maximum current is reached. The power supply also features electronic overload protection. Specifications DC Output voltage: 0-24 V (stabilised) Ripple and noise (max): 25 mVpp Output current (max): 10 A (0-12 V) Max output current falls linearly to 6 A at 24 V Electronic, continuously adjustable current limiter, adjusted with screwdriver AC Output voltage: 0-24 V (stabilised sine) Output current (max): 6 A Electronic current limiter

The perfect choice for experiments with, for example, electron beam tubes requiring voltages up to 500 V DC at a low current level. The unit also provides two auxiliary outputs: A continuously variable negative voltage (down to -50 V DC), series connected with the 500 V output, and a stepwise selectable AC voltage with galvanic isolation from the DC outputs. Continuous adjustment of the -50 V and 500 V voltages. The current is limited to 50 mA. Voltage and current can be read from separate displays. A switch selects which output to monitor. The AC output delivers up to 3 A and is provided with a thermo fuse. Note: Not recommended for students due to high output current. Specifications Negative DC voltage: 0 to -50 V Current (max): 50 mA Positive DC voltage: 0 to +500 V Current (max): 50 mA Ripple: less than 0.1% Regulation: Better than 1 % for variations in mains voltage and load up to 10 %. AC Voltage: 2 to 7 V (1 V steps) Current (max): 3 A

This Timstar balance has been designed specifically for school use, offering outstanding value combined with smart features for an easy-to-use balance. The tough, durable, ABS housing is designed to withstand field and laboratory environments, while being easy to clean, and protects from accidental spills. With built-in U-Protect™ protection all Timstar balances can withstand excessive overloads. Complete with an AC adapter, plus integral security slot. Features: • Stainless steel pan, diameter 120 mm • Three-point U-Protect™ overload protection • Built in security slot for Kensington™ type lock • Mains powered with optional rechargeable battery • Auto power off • Stackable • Bi-directional RS-232 interface for connection with computers/printers • Adjustable levelling feet with built in spirit level • Breeze/Draft shield to protect from drafts 135 mm x 89mm (D x H) • Full range tare • Units of Measure g/lb/oz/ct/dr/ozt/GN/N/tl T/tl H/tl S/custom • Calibration Push button calibration using external mass • Display digit LCD, 18 mm digits with backlight • Dimensions 178 x 257 x 84 mm (W x D x H) • Net Weight 1.1 kg Applications: • Weighing in grams, newtons and other units • Parts counting • Percentage weighing • Under balance weighing

This Timstar balance has been designed specifically for school use, offering outstanding value combined with smart features for an easy-to-use balance. The tough, durable, ABS housing is designed to withstand field and laboratory environments, while being easy to clean, and protects from accidental spills. With built-in U-Protect™ protection all Timstar balances can withstand excessive overloads. Complete with an AC adapter, plus integral security slot. Features: • Stainless steel pan, diameter 120 mm • Three-point U-Protect™ overload protection • Built in security slot for Kensington™ type lock • Mains powered with optional rechargeable battery • Auto power off • Stackable • Bi-directional RS-232 interface for connection with computers/printers • Adjustable levelling feet with built in spirit level • Breeze/Draft shield to protect from drafts 135 mm x 89mm (D x H) • Full range tare • Units of Measure g/lb/oz/ct/dr/ozt/GN/N/tl T/tl H/tl S/custom • Calibration Push button calibration using external mass • Display digit LCD, 18 mm digits with backlight • Dimensions 178 x 257 x 84 mm (W x D x H) • Net Weight 1.1 kg Applications: • Weighing in grams, newtons and other units • Parts counting • Percentage weighing • Under balance weighing

Replacement adapter for Timstar Standard, Core Portable and Dune Compact balances.