Timstar

To BS 2775. Normal wall.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS 2775. Normal wall.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS 2775. Normal wall.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS 2775. Normal wall.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS 2775. Normal wall.

To BS 2775. Normal wall. *N8 Tubing fits most Bunsen Burners.

To BS2775. Normal wall. Translucent.

To BS2775. Normal wall. Translucent.

To BS2775. Normal wall. Translucent.

To BS2775. Normal wall. Translucent.

To BS2775. Normal wall. Translucent. *N8 Tubing fits most Bunsen Burners

To BS2775. Normal wall. Translucent. *N8 Tubing fits most Bunsen Burners

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Gripping width 44 mm. Pack of 10.

Glass with ground edges.

Glass with ground edges.

Borosilicate glass.

Borosilicate glass.

Borosilicate glass.

Polystyrene disposable weighing boats. Can be shaped to form pouring funnel.

Polystyrene disposable weighing boats. Can be shaped to form pouring funnel.

Polystyrene disposable weighing boats. Can be shaped to form pouring funnel.

Polypropylene weighing bottle, 50 mL.

Pyrex weighing funnel, 10 mL.

Raised centre, one end flat and one end scoop, stainless steel. Length 140 mm.

A small, low-priced, battery-powered stereo microscope with LED illumination, simple design and fixed 20x magnification. The microscope has sharp optics and 55-75 mm interpupillary adjustment. The small size and weight make this stereo microscope suitable for use in the field, for viewing insects, leaves, flowers, rocks, pond life etc. Complete with dust cover. • Magnification: 20x • Objectives: 2x • Field of vision: 20 mm diameter • Eyepieces: 10x, wide-field • Dimensions: 23 10 13.5 cm • Illumination: LED (top light) • Power supply: x AA batteries (not included) • Weight: 585g

Basic microscope eyepiece camera with 2 MP resolution, which connects to PC via the inbuilt USB 2.0 cable. Works with both monocular and binocular microscopes by replacing the eyepiece. Fits eyepiece tubes with diameter of 23 mm or 30 mm (adapter included). Comes with software for Windows PCs. Software download: timstar.co/MI170800-driver • MP still resolution • 640 480 live resolution

Eyepiece graticule with 10mm Horizontal Micrometer Scale subdivided into 100 divisions of 0.1mm (100µm).

Stage micrometer with 10 mm scale, subdivided into 100 divisions of 0.1 mm (100µm). Mounted on a black, anodised aluminium slide 76 x 25 x 1.5 mm. Suitable for all microscopes.

Stage micrometer with 1 mm scale, subdivided into 100 divisions of 0.01 mm. Mounted on a black, anodised aluminium slide 76 x 25 x 1.5 mm. Suitable for all microscopes.

The micrometer scale is disc mounted on black glass slide. Suitable for all microscopes. Slide comes with scales: 10 mm x 0.1 mm and 1 mm 0.01 mm. Dimensions: 75 x 25 mm.

An economical but good quality glass stage micrometer slide, with 1.0 mm long x 0.01 mm scale marked on the glass.

An economical but good quality glass stage micrometer slide, with 1.0 mm long x 0.01 mm scale marked on the glass.

Complete micrometer eyepiece WF 10X/18 mm with 100 divisions in 10 mm and crosshair. Suitable for all Motic Microscopes. Diameter: 18 mm.

2 strips of 5 images, each image has a 10mm scale in 0.1mm (100µm) divisions and circular cut guides for 16mm, 19mm, 21mm and 24mm. Printed on plastic film.

The C-chip™ is an easy-to-use, precision disposable plastic haemocytometer, developed to solve the problem of conventional glass haemocytometers. Supplied individually packed, in a box of 50 slides, these Neubauer Improved type haemocytometers have 0.1 mm 0.05 mm grids, for counting blood cells (erythrocytes, leukocytes), mammalian cells etc. Supplied as box of 50 double chamber slides (100 tests). Features and benefits: • No need to coverslip • No need to wash for reuse • No more contact to hazardous materials • Accurate, reliable and repeatable • Bright grid pattern • tests per slide • Pack of 50 double chamber slides (= 100 tests) • Quartz grade optical plastic • Sturdy and strong Main applications: • Blood analysis • Cell culture; cell concentration measurement and cell viability counts • Microbiology; bacterial and fungal spores Dimensions: 25 75 1.6 mm (w l t) Chamber depth: 100 µm Chamber volume 10 µL

These Bright-Line (Rhodium coated) glass Haemacytometers are designed for accurate counting of cells in blood or other fluids, with one-piece glass construction, an H-shaped moat to form two counting areas (plateaus) and ""V"" slash at the loading side of each plateau. Each plateau features enhanced Neubauer rulings, the ruled surface being 0.1 mm below the cover glass, limiting the volume of blood or fluid over square mm to 0.1 cu.mm and over each of 400 squares (within the central square mm) to 0.00025 cu. mm. Contact of the flat, polished cover glass surfaces with cover glass supports produces an exact volume of fluid over the counting area. The difference in surface tension characteristics between the metallic surface on the chamber and the polished cover glass assures smooth capillarity for precise loading and more even cell distribution. Supplied as double chamber with two cover glasses or kit which includes double counting chamber, cover glasses and red and white pipettes, all in protective case. Spare/replacement glass cover glasses are also available, as pack of 2. • Bright Line (Rhodium coated) counting chamber • Improved Neubauer ruling pattern • Cell Depth: 0.100 mm ±2 • Volume: 0.1 µL To clean the counting chamber after use: remove the cover glass and clean with water or mild cleaning solution (e.g. 10% bleach solution). Dry the counting chamber with soft cloth/wipe, or rinse with acetone.

RS232 for Scout balances.

Alkaline Batteries Bulk Pack Of 40 Aaa

Alkaline Batteries Bulk Pack Aa

Reliable performance, excellent resistance to corrosion and designed to meet all major quality, safety and environmental standards.

Reliable performance, excellent resistance to corrosion and designed to meet all major quality, safety and environmental standards.

Reliable performance, excellent resistance to corrosion and designed to meet all major quality, safety and environmental standards.

Reliable performance, excellent resistance to corrosion and designed to meet all major quality, safety and environmental standards.

Reliable performance, excellent resistance to corrosion and designed to meet all major quality, safety and environmental standards.

This clear polycarbonate gable lid is suitable for use with the 2 and 4 litre triple baths, BA150300, BA150304 and BA150306. •Allows allowing full use of whole width of a water bath with the lowest height of the gable being 45mm above the bath. •Ensures that where condensation accumulates in use there are no drip points which could spoil work in open flasks. •Water evaporation is reduced at elevated temperatures, maintaining water levels in the water bath. •The lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top. •Reduces energy consumption and running costs for your water bath. •Insulated handle

Simax Reagent Bottle 500Ml Red Cap

Simax Reagent Bottle 1000Ml Red Cap

Simax Reagent Bottle Spare Pouring Ring

Edvocycler Junior

Blood Pressure Monitor

Ideal for keeping safety glasses and lenses clean and dust free. Highly absorbent, non-abrasive lint free tissues.

•Large multi-purpose Universal disinfectant wipes to clean and disinfect. •Clinell Universal Wipes provide a single, universal product for surface disinfection and cleaning of non-invasive medical devices. •Containing a unique, patented antimicrobial formula they can be used as a skin friendly, disinfectant and detergent wipe. •Proven to kill at least 99.999%* of germs including norovirus, coronavirus, flu virus, HIV and MRSA

Crucible, squat 15 mL complete with ringed handle lid.

Crucible, squat 25 mL complete with ringed handle lid.

Crucible, tall, 25 mL complete with ringed handle lid.

A 10-inch Android tablet with 7 integrated measurement sensors. Cobra SMARTlink is a state-of-the-art, high-performance 3-in-1 tablet. It is not only a great measuring and display device for digital science teaching, but also a full featured Android tablet. Due to the brilliant 10.1 inch display combined with the powerful hardware and the 7 internal measuring sensors, it is perfectly equipped for the demands of modern, digital science teaching. Cobra SMARTlink is easy and reliable to use. Features Equipment - Start measuring directly with 7 internal sensors and the pre-installed measuring software measureAPP Performance - A powerful CPU and sufficient RAM ensure that everything always runs smoothly Completeness - Get started right away with more than 100 ready-to-use experiment descriptions for all disciplines (physics, chemistry, biology and natural sciences) in the pre-installed measureAPP Presentation - A brilliant 10.1"" display offers sufficient space for all applications as well as a detailed and pin sharp display Extensibility - More than 40 additional sensors connectable via Bluetooth and USB. Versatility - The Android operating system and the more than 3 million apps in the Google Play Store support you beyond experimenting Endurance - The large battery with 10.000 mAh and quick charge function ensures your use throughout the entire school day Connectivity - 5 integrated high-speed USB ports for lightning-fast measurements and connection of accessories such as cameras, USB sticks or hard drives Equipment and Technical Data Octa-Core (8-core) processor 2.0 GHz, 4 GB RAM (DDR3) Internal memory 64 GB, expandable to 128 GB with microSD card 10.1 inch LCD touch screen (16:10), resolution 1,200 x 1,920 (WUXGA) Front camera 2 MP, main camera 5 MP Built-in loudspeaker, built-in microphone, 3.5 mm headphone jack Bluetooth 5.0, GPS, WiFi standard 802.11 a/b/g/n/ac 1 x USB type C to charge the device and for data communication e.g. via USB stick, PC Battery: 10.000 mAh Weight: 830 g Internal sensors Temperature: 2 x thermocouple type K Measuring range: -200 - 1200°C Resolution: 0,4°C Accuracy: +/- 3% Data rate: 1 kHz Voltage: 1 x voltage connection 4 mm sockets Measuring range: -30V…+30 V Resolution: 20 mV Accuracy: +/- 1% Data rate: 1 kHz Current: 1 x current connection 4 mm sockets Measuring range: -1A - +1A Resolution: 0,5 mA Accuracy: +/- 1% Data rate: 1 kHz Light (built-in sensor) Measuring range: 1-128 kLx Resolution: 1 Lx Accuracy: +/- 4 % Data rate: 10 Hz Humidity (built-in sensor) Measuring range: 0 - 100 % Resolution: 0,1 % Accuracy: +/- 4 % (bei 0-80 %) Data rate: 10 Hz UV (built-in sensor) Measuring range: 0 - 400 W/m² Resolution: 0,1 W/m² Accuracy: +/- 4 % Data rate: 10 Hz Acceleration (on board) 4 x USB 2.0 inputs for Cobra SMARTsense sensors, maximum data rate up to 10 kHz Contents 1x Cobra SMARTlink 1x Charging cable type C with charging adapter 2x Temperature probes type K 2x Banana plugs, stackable, red with 4 mm plug, 50 cm length 1x Banana plug, stackable, blue with 4 mm plug, 50 cm length 1 x Manual

Measure both DC and AC voltages in circuits and plot the curve directly. This sensor makes it easy to explore the basic concepts of electricity. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Range: +/- 30 V •Resolution: 0.02 V •Sample rate: 1000 Hz (10000Hz via USB)

The Cobra SMARTsense current sensor can be used to measure the current intensity in circuits and plot it directly. In this way, students develop a deeper understanding of the basic concepts of electricity. Quick and easy connection via Bluetooth and the free measureApp Contains a USB-C rechargeable lithium polymer battery Up to 50 hours use on one battery charge Range: +/- 1 A Resolution:0.5 mA Sample rate: 1000 Hz (10000 Hz via USB) Short circuit proof up to 3 A

This Cobra SMARTsense sensor enables real-time temperature measurement with graphical progression which can also continue over a long period of time. The water resistance ensures the longevity of the sensor even in experiments with liquids. Quick and easy connection via Bluetooth and the free measureAPP Range: -40 - 120 °C Resolution: 0.01 °C Sample rate: 10 Hz Water resistant to IP67. Sensor requires a battery (CR2032) which is not included.

This simple to use Cobra SMARTsense light sensor is perfect for taking measurements within the classroom but also for using outdoors, for example, when studying photosynthesis or light levels in woodland and forests. Quick and easy connection via Bluetooth and the free measureAPP Contains a USB-C rechargeable lithium polymer battery. Up to 50 hours use on one battery charge Range: 1 - 128 kLx Resolution: 1 Lx Sample rate: 10 Hz

Measure the movement of objects using the Cobra SMARTsense motion sensor. Students can perform experiments on linear motion and gain a deeper understanding of mechanics. Quick and easy connection via Bluetooth and the free measureAPP Contains a USB-C rechargeable lithium polymer battery Up to 50 hours use on one battery charge Range: 0.2 - 2 m Resolution: 1 mm Sample rate: 50 Hz

This Cobra SMARTsense Photogate sensor pair allows precise time measurement of dynamic processes, including free fall, pendulum investigations and many more. Quick and easy connection via Bluetooth and the free measureAPP Contains a USB-C rechargeable lithium polymer battery Up to 50 hours use on one battery charge Range: 0 - ∞ Resolution: 0.01 ms Sample rate: 1000 Hz Supplied as a pair

Stainless steel support rods for DA220060 SMARTsense Photogate sensor. 300 mm with external thread.

With this Cobra SMARTsense pH sensor, the pH value of solutions can be accurately measured, and the real-time curve displayed. Ideally suited for practicals across chemistry and biology as well as environmental science. Quick and easy connection via Bluetooth and the free measureAPP Range: 0 – 14 Resolution: 0.01 Sample rate: 100 Hz Includes pH electrode. Water resistant to IP67. Sensor requires a battery (CR2032) which is not included.

Measure the conductivity or ion content of a solution with this waterproof Cobra SMARTsense Conductivity sensor. Quick and easy connection via Bluetooth and the free measureAPP Conductivity: Range: 0 - 20000 µS/cm Resolution: 8 µS/cm Temperature: Range: 0 - 100 °C Resolution: 0.1 °C Sample rate: 10 Hz Water resistant to IP67. Sensor requires a battery (CR2032) which is not included.

With this Cobra SMARTsense Drop Counter sensor, single drops can be counted and directly converted into a volume. If you connect a pH electrode, a titration can be carried out easily and precisely. Easy to clamp to a retort stand and with an integrated holder to use a temperature sensor. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Drop Counter: oRange: 0 - ∞ oResolution:30 Imp/s •pH: oRange: 0 - 14 oResolution: 0.01 •Sample rate: 50 Hz •The PH-Electrode is sold separately

Poor air quality due to a high proportion of carbon dioxide in the indoor air reduces concentration and performance. Use this Cobra SMARTsense CO2 sensor to measure the carbon dioxide content of the air and the influence of, for example, the photosynthesis of indoor plants. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Range: 0 - 100000 ppm •Resolution: 2 ppm •Sample rate: 1 Hz Accessory: Plug with hole for use with reaction vessels, contact us for details.

Measure the oxygen concentration of solutions in biology, environmental sciences and chemistry. Produce graphs showing how the oxygen content varies in the classroom throughout the day, measure the respiration of small organisms and perform photosynthesis experiments. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Range: 0 - 20 mg/l •Resolution: 0.01 mg/l •Sample rate: 100 Hz •Including oxygen probe for Oxygen in air and water.

Continuously monitor the heart rate before, during and after exercise. This Cobra SMARTsense Pulse sensor can be used to conduct various student experiments in the field of human and electrophysiology. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Range: 30 - 200 bpm •Resolution: 1 bpm •Sample rate: 10 Hz •Includes ear clip.

Cobra SMARTsense Sound sensor including microphone. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Sound level: oRange: 55 - 110 dB(A) oResolution: 0.1 dB(A) oSample rate: 10 Hz •Sound signal: oMicrophone frequency range: 100 - 15000 Hz oSample rate: 32 kHz (USB), 8 kHz (Bluetooth)

Use this Cobra SMARTsense Force Acceleration sensor to measure the acceleration resulting from an external force. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Force: oRange: ±50 N oResolution: 30 mN •Acceleration: oRange: ±16 g oResolution: 0.01 g •Gyroscope: oRange: ±34.9 rad/s oResolution: 0.01 rad/s •Sample rate: 1000 Hz

Measure current and voltage with one sensor. Calculate the power and energy in renewable energy systems and in electrochemistry. Quick and easy connection via Bluetooth and the free measureAPP Contains a USB-C rechargeable lithium polymer battery Up to 50 hours use on one battery charge Voltage: •Range: ±5 V; ±30 V •Resolution:1 mV; 20 mV Current: •Range: ±180 mA; ±1 A •Resolution: 40 µA; 0.5 mA •Sample rate: 100 Hz

Measure the magnetic field of permanent magnets, coils or simply the earth's magnetic field. Thanks to the 3 measuring axes, the magnitude and direction of the magnetic field can be determined at any point in space. •Quick and easy connection via Bluetooth and the free measureAPP •Contains a USB-C rechargeable lithium polymer battery •Up to 50 hours use on one battery charge •Range: ±130 mT; ±5 mT •Resolution: 0.1 mT; 0.001 mT •Sample rate: 1000 Hz

Measure the surface temperature of different objects, for example to investigate the thermal conductivity of different metals. Quick and easy connection via Bluetooth and the free measureAPP Contains a USB-C rechargeable lithium polymer battery Up to 50 hours use on one battery charge •Range: -25 ... 125 °C •Resolution: 0.1 °C •Sample rate: 10 Hz

A SMARTsense sensor set supporting 11 experiments on the following topics: •Photosynthesis (2 methods) •Transpiration of leaves •Breathing (CO2 and O2 measurement) •Glycolysis (2 methods) •Ionic permeability of the cell membrane •Determination of the Michaelis constant •Enzyme inhibition •Substrate inhibition of enzymes •Enzymatic activity of catalase The Cobra SMARTsense sensors Temperature, pH, Conductivity, Light, Pressure, CO2 and Oxygen are used in all 11 experiments in combination with tablets (iOS and Android) and smartphones (Android). Contents •Cobra SMARTsense Temperature: Measuring range: 40 - 120 ° C, resolution: 0.01 ° C, sampling rate: 10 Hz •Cobra SMARTsense pH: Measuring range: 0 - 14, resolution: 0.01, sampling rate: 10 Hz •Cobra SMARTsense Conductivity: Measuring range: 0 - 20,000 μS / cm, 0 - 100 ° C, resolution: 1 μS / cm, 0.1 ° C, sampling rate: 10 Hz •Cobra SMARTsense Light: Measuring range: 1 lx - 128 klx, resolution: 0.1 lx, sampling rate: 10 Hz •Cobra SMARTsense Pressure: Measuring range: 20 - 400 kPa, resolution: 0.1 kPa, sampling rate: 800 Hz •Cobra SMARTsense CO2: Measuring range: 0 - 100,000 ppm, resolution: 2 ppm, sampling rate: 1 Hz •Cobra SMARTsense Oxygen: Measuring range: 0 - 20 mg / l, resolution: 0.01 mg / l, sampling rate: 100 Hz •Lamp socket with reflector, diameter 20 cm, and 120 W filament lamp •Special glassware •Special stand material for experiment setups •Experiment manual

Heart rate, pulse, lung volume, body temperature and blood pressure are the core parameters of human and electrophysiology. With this set, you can easily teach students the meaning of these terms. This set contains Cobra SMARTsense sensors that are easy to operate and take measurements in real time. Equipment set allowing the performance of 9 experiments about the following topics: •Electrophysiology of the heart (3 experiments) •Blood circulation (1 experiments) •Skin temperature (1 experiment) •Lung function, lung volume (3 experiments) •Lung diseases (1 experiment) The set consists of all necessary components for the experiments: •Stable, stackable storage box with moulded foam insert •Cobra SMARTsense ECG •Cobra SMARTsense Pulse •Cobra SMARTsense Temperature •Cobra SMARTsense Spirometer •Blood pressure measurement combination

This set of datalogging devices is ideally suited to shared-work experiments with school groups for outdoor measurements of ecological data and works with mobile devices (iOS and Android). •Whether in the classroom, outdoors or on project days: in this robust aluminium case, you will always find the right device for carrying out fascinating experiments with school groups. •Up to 4 groups can work on and investigate interesting topics in parallel. •Works with all iOS and Android devices •Download free app from Apple App Store or Google PlayStore •Students can evaluate the data at home, as a homework assignment. Contents; •Robust aluminium case •1 x Cobra SMARTsense - Relative Humidity, 0 - 100 % •1 x Cobra SMARTsense - pH, 0 - 14 •1 x Cobra SMARTsense - Conductivity, 0 - 20000 µS/cm •1 x Cobra SMARTsense - Temperature, - 40 - 120 °C •1 x Cobra SMARTsense - Absolute Pressure, 20 - 400 kPa •1 x Cobra SMARTsense - Light, 1 - 128 kLX •1 x Cobra SMARTsense - Colorimeter for the measurement of turbidity, 0 - 100 % •1 x pH electrode, plastic, gel-filled •1 x 100 red pH 4 buffer tablets •1 x 100 green pH 10 buffer tablets •5 x 20 ml calibration solution for conductivity electrode •2 x protective case for pH and conductivity electrodes •1 x 120 labels •4 x 100 mL square flange (HDPE) •2 x 250 mL PP laboratory beaker

Tip Tinner Cleaner 23G

White plastic screw connections 30 mm diameter, 19 mm high.

Bulbs, MES Cap, 1.5 V, 200 mA.

The Lascells E-Field Detector provides a new and novel way to demonstrate charge. This highly sensitive electronic device is an essential piece of equipment in the Physics teachers’ armoury as it can detect very small charges and their polarity, as well as charge at a distance. Until now, in the school science lab, it has only been possible to demonstrate opposite and like charges by repulsion and attraction experiments or the very delicate Gold Leaf Electroscope. This unique, robust piece of equipment allows the Physics teacher to clearly show whether a positive or negative charge has been created and in which directions the electrons have moved. The LED array indicates not only positive or negative charge, but also its size. The external voltmeter sockets allow for quantitative measurements. Very quick and easy to setup, the Lascells E-Field Detector is a benefit for specialist and non-specialist teachers alike and is so easy to use that students could gather data themselves. The comprehensive instructions include both traditional experiments that benefit from the use of the Lascells E-field Detector along with new exciting ways to look at charge. This makes difficult concepts more understandable and engaging for the students. This is a real game changer in the subject of electrostatics. 24V AC-DC Adapter included.

The Proof Plane is a device for transferring charge from a charged object. Charge a plastic strip by rubbing with a cloth. Touch the charged object with the proof plane. Charge will be shared between the object and the Proof Plane so both will have the same charge sign. Show this using the E-Field Detector (EL220000) If you are using a Faraday’s Pail touch the inside of the Pail with the charged Proof Plane. Charge will be transferred and immediately move to the outside of the Pail. If the process is repeated equal amounts of charge will be transferred each time. If the Proof Plane is charged by induction the charge sign will be opposite and usually greater than by simple charge sharing. Show these effects using the E-Field Detector.

The Earth Grounding Plate is designed for use with The Lascells E-Field Detector but can also be used in any situation where an earthed working surface is required to neutralise electrostatic charge. Place the Grounding Plate on the bench with the E-Field Detector on top. Using the detector Earth Lead connect the green Earth socket on the detector to the metal screw on the grounding plate. Use a connecting lead to also connect from the green Earth socket to a suitable Earth point such as a metal water pipe or similar.

The Charge Separation Rods are designed for use with the Lascells E-Field Detector (EL220000). Arrange the rods so that they are touching along an axis. Bring a charged object near one end of the rods and use a pencil or similar to slide the rods apart touching only the feet and not the metal part of the rods. When the charged object is removed test the charge on the two separated rods. If the charged object is negative, electrons are repelled to the rod furthest away leaving the rod closest to the object positively charged. By moving the rods apart the electrons cannot return so the furthest has an overall negative charge and the nearest an equivalent positive charge.

Spare drive belt for EL85100.

Mini Thermo-Anemometer

This carbon dioxide detector measures CO2, air temperature and humidity. A useful tool to help to regulate ventilation in enclosed spaces such as classrooms, indicating when fresh air should be allowed in to help remove air that contains virus particles and to help prevent the spread of Covid-19. People exhale carbon dioxide when they breath out. If there is a build-up of this in an area it can indicate that ventilation needs improving. This device adopts a high-precision non-dispersive infrared CO2 sensor that detects CO2 accurately and sensitively. Containing a high-capacity rechargeable lithium battery, making it easily portable. To preserve electricity, it powers off after 30 minutes of inactivity. A USB charging cable is also provided allowing simple recharging using either a PC or mains plug. Product specifications: CO2 concentration measurement; •Range: 0 to 9999ppm •Accuracy: +/-75ppm / +/-5% of rdg •Resolution: 1ppm Temperature and humidity detection; •Temperature range: -20 to +70°C •Temperature accuracy: +/-2°C •Temperature resolution: 0.1°C •Humidity range: 0 to 100%RH •Humidity accuracy: +/- 3.5%RH (20 to 80%RH) otherwise +/-5%RH •Humidity resolution: 0.1%RH Battery: 1000mAh rechargeable lithium battery Battery charge: USB 5V charging Dimensions: 90mm x 60mm x 47mm LCD dimensions: 49mm x 38mm Operating conditions: 0 to +50°C