Timstar

Sterile, plastic, individually packed and graduated. Luer fitting.

Sterile, plastic, individually packed and graduated. Luer fitting.

Holder for glass gas syringes.

Ground glass syringe. Marked with 20 mL major graduations, and 1 mL minor graduations. Suba-Seal Stoppers ST14710 or ST14715 can be used as resealable stoppers. For video demonstration, visit timstar.co/SubaSealSyringe

Luer fitting, interchangeable pistons and barrels.

A plastic tap with male and female Luer connectors.

Cobalt chloride free humidity indicator paper does not contain carcinogenic or toxic material. There is a clear colour change from yellow-green to pale to colourless at approximately 2% Humidity indicator paper traditionally contains cobalt chloride which is known for it’s toxic and carcinogenic properties Handling these indicator papers puts end users and those involved with packing them at risk This non-toxic moisture indicator paper disqualifies this risk being safer to use

Johnson Test Papers Litmus Blue Paper, pH paper. Supplied in books of 20 strips.

Johnson Test Papers Litmus blue paper, pH paper. Supplied in books of 20 strips.

Johnson Test Papers Universal Indicator Paper pH 1 - 14, pH paper - for use in education. Supplied in books of 20 strips.

Johnson Test Papers Universal Indicator Paper pH 1 - 14, pH paper - for use in education. Supplied in books of 20 strips.

Johnson Test Papers Litmus Red Paper, pH paper- for use in education,and industrial. 1 reel (5m x 7mm).

Johnson Test Papers Universal Indicator Paper pH 1 - 11, pH paper- for use in education,and industrial. 1 reel (5m x 7mm).

Borosilicate 3.3 test tubes, medium wall, with rim.

Borosilicate 3.3 test tubes, medium wall, with rim.

Medium wall, with rim.

This camera produces both radiometric heat map, and standard image. The two images can be blended with variable proportion, so that sources of heat and cold can be easily identified, and the images easier to understand. Up to 6,000 images can be stored on the included micro-SD card, and transferred to the computer via USB, and then be used to enhance coursework or teaching notes. The unit is supplied with tripod for hands-free imaging, USB cable, micro-SD card with adaptor, and carrying case. • 2.2"" colour LCD • Fully automatic focus free • Environment temperature compensation • Centre spot crosshair • Adjustable emissivity • Image bending • Auto power off • Li-ion rechargeable battery

For autoclaving and disposal of cultures and petri-dishes. Dimensions: 670 x 305 mm.

Self adhesive tape with strips which change colour. Dimensions 25 mm x 55m (W x L).

Temperature, Steam, Time strips. For use in autoclaves to indicate that the sterilisation cycle is complete. Strips change colour when correct conditions have been attained. 121°C at 15 minutes.

Temperature, Steam, Time strips. For use in autoclaves to indicate that the sterilisation cycle is complete. Strips change colour when correct conditions have been attained. 126°C at 10 minutes.

Self-seal with colour changing indicator. Ideal for maintaining sterility of products.

The Prestige standard classic autoclave is a lightweight, portable model with a 9 litre capacity. It sterilises in just 11 minutes at 126°C. Easy to use, fully automatic with a simple one-touch operation.

The Prestige classic extended autoclave is a lightweight, portable model with a 12 litre capacity. It sterilises in just 11 minutes at 126°C. Easy to use, fully automatic with a simple one-touch operation.

The Prestige standard classic gauged autoclave is a lightweight, portable model with a 9 litre capacity. It sterilises in just 11 minutes at 134°C. Complete with gauges to show pressure and temperature. Easy to use, fully automatic with a simple one-touch operation.

Spare gasket for classic autoclaves.

The Prestige Medical Classic Media autoclave offers safe method of sterilising media in the school laboratory. With an interlock lid for safety, it ensures the unit cannot be opened until the temperature inside has fallen to safe level, preventing vessels/glassware exploding or liquid leaking. With one-touch button operation you can set and forget, with no supervision necessary. This model has been specifically designed to provide the most suitable working conditions (temperature, pressure and cycle time) for sterilising media and is ideal for educational use. Full cycle time approx. 70 minutes. Cycle temperature 121 °C.

The Prestige Medical Classic Media autoclave offers safe method of sterilising media in the school laboratory. With an interlock lid for safety, it ensures the unit cannot be opened until the temperature inside has fallen to safe level, preventing vessels/glassware exploding or liquid leaking. With one-touch button operation you can set and forget, with no supervision necessary. This model has been specifically designed to provide the most suitable working conditions (temperature, pressure and cycle time) for sterilising media and is ideal for educational use. Full cycle time approx. 70 minutes. Cycle temperature 121 °C.

High dome pressure cooker with safety valve and pressure settings (5, 10 or 15 lb). 6 litre capacity. Operates at 121 °C and 15 psi.

Spare gasket for high dome pressure cooker (AU00900).

This Dune balance has a 15 mm high LCD, an advanced overload protection to prevent internal damage and splash-proof keypad with three simple to use colour coded buttons. Comes complete with mains adaptor but can be operated using six AA batteries (not included), with an auto off function to save battery life. •12-month warranty. •Dimensions 208 x 147 x 40 mm (W x D x H) •Large platform (145 x 145 mm) removes easily for cleaning

This Highland® balance is compact and durable and stacks for easy storage. Sturdy ABS construction allows it to withstand demanding classroom use and the ShockProtect® offers advanced overload protection. HandiCal® facilitates internal calibration without the need for external weights. •Grade 304 stainless steel pan size 120 mm diameter •RS-232 and USB interfaces fitted as standard •Kensington type security lock down slot •Hook included for weighing below the balance •Level indicator and adjustable feet ensure proper balance setup for optimum weighing results •Backlit LCD with 16 mm digits •Internal rechargeable battery with auto power off •AC adapter included •Overall dimensions 170 x 245 x 80 mm (W x D x H) •Two year manufacturer's warranty

This Highland® balance is compact and durable and stacks for easy storage. Sturdy ABS construction allows it to withstand demanding classroom use and the ShockProtect® offers advanced overload protection. HandiCal® facilitates internal calibration without the need for external weights. •Grade 304 stainless steel pan size 120 mm diameter •RS-232 and USB interfaces fitted as standard •Kensington type security lock down slot •Hook included for weighing below the balance •Level indicator and adjustable feet ensure proper balance setup for optimum weighing results •Backlit LCD with 16 mm digits •Internal rechargeable battery with auto power off •AC adapter included •Overall dimensions 170 x 245 x 80 mm (W x D x H) •Two year manufacturer's warranty

This Highland® balance is compact and durable and stacks for easy storage. Sturdy ABS construction allows it to withstand demanding classroom use and the ShockProtect® offers advanced overload protection. HandiCal® facilitates internal calibration without the need for external weights. •Grade 304 stainless steel pan size 120 mm diameter •RS-232 and USB interfaces fitted as standard •Kensington type security lock down slot •Hook included for weighing below the balance •Level indicator and adjustable feet ensure proper balance setup for optimum weighing results •Backlit LCD with 16 mm digits •Internal rechargeable battery with auto power off •AC adapter included •Overall dimensions 170 x 245 x 80 mm (W x D x H) •Two year manufacturer's warranty

Mains adapter for Adam CB Series balances.

This precision weighing balance is housed in an impact-resistant ABS case with a 115 mm diameter stainless steel weighing pan, splash-proof membrane keypad, levelling bubble and adjustable feet. The balance can be either battery or mains powered via an AC/DC Adaptor, not supplied (see BA120160). Complete with user guide and 1 year warranty. Other features •26 mm high contrast LCD with backlight •Automatic backlight when weight is placed on the pan •Zero tracking ensures stable and repeatable readings •Tare facility over the full range •Overload protection to 100 % over capacity •Low Battery indication •Auto Power Off after 1.5 minutes of no activity. •Accuracy: ±0.02 g •Power: 4 x 1.5V AAA alkaline battery or AC mains power adaptor •Dimensions (L x W x D): 230 x 180 x 60 mm •Weight: 1.5 kg

Mains adapter for Precision Economy Bbalanc

The AFKS-600 precision weighing balance has an impact-resistant ABS plastic case and weighing pan, a splash-proof protective cover and non-slip rubber feet. The balance can be either battery or mains powered via an AC/DC mains power adaptor (BA130660) •ABS plastic case with non-slip rubber feet •Splash-proof protective cover •175 x 160 mm weighing pan •20 mm hi-contrast LCD display with function indicators •Automatic backlight when weight is added to the pan •Zero tracking ensures stable and repeatable readings •Tare facility over the full range and can be actioned several times throughout a weighing cycle •Check Weighing to a set weight as +/- value •Low battery indicator •Auto power off after 1.5 minutes of no activity •Supplied with 6 x AA Batteries

The AFKS-6000 precision weighing balance has an impact-resistant ABS plastic case and weighing pan, a splash-proof protective cover and non-slip rubber feet. The balance can be either battery or mains powered via an AC/DC mains power adaptor. •ABS plastic case with non-slip rubber feet •Splash-proof protective cover •175 x 160 mm weighing pan •20 mm hi-contrast LCD display with function indicators •Automatic backlight when weight is added to the pan •Zero tracking ensures stable and repeatable readings •Tare facility over the full range and can be actioned several times throughout a weighing cycle •Check Weighing to a set weight as +/- value •Low battery indicator •Auto power off after 1.5 minutes of no activity •Supplied with 6 x AA Batteries

Mains adapter for FKS Precision balance.

This Hi-Precision weighing scale is housed in an impact resistant ABS plastic case with stainless steel weighing pan, permanently attached hinged plastic draft shield, levelling bubble and adjustable feet. It is an easy to use, precise scale with three key operation and can be either battery or mains powered via an AC/DC adapter. Weighs in g, ct, oz, dwt, ozt, gn mg. • 52 mm Ø stainless steel weighing pan • Impact-resistance ABS case with adjustable non-slip rubber feet and bulls eye level bubble • Large 21 mm LCD display with Backlight • Automatic backlight when weight is added to the pan • Auto zero tracking ensures stable and repeatable readings • Stability indicator • Simple three key operation • Plus/minus weighing • Overload warning display • Low Battery indication • Auto power off can be user disabled for continuous use • Auto back light can be user disabled • Capacity: 60 g • Resolution: 0.001 g • Accuracy: ±0.003 g • Power: 6 x AAA alkaline batteries or AC/DC mains power adapter (supplied) • Dimensions: 155 x 112 x 85 mm • Weight: 370 g

Replacement mains adapter for CL Series balances.

Designed for education applications, the OHAUS Scout with large backlit LCD backed by education software is the ideal balance for your classroom. It is built to endure demanding classroom applications with superior overload protection. Features including, faster stabilization time, increased capacity, multiple connectivity options and stackable design make Scout the best weighing experience for the next generation classroom. •RS232, USB, Bluetooth and Ethernet Connectivity options •Integral weighing hook •Practical stackable design for convenient storage •Robust ABS housing, stainless steel pan •AC Adaptor included, 4 AA batteries optional •Model SKX123 •Capacity 120 g •Readability 0.001 g

Designed for education applications, the OHAUS Scout with large backlit LCD backed by education software is the ideal balance for your classroom. It is built to endure demanding classroom applications with superior overload protection. Features including, faster stabilization time, increased capacity, multiple connectivity options and stackable design make Scout the best weighing experience for the next generation classroom. •RS232, USB, Bluetooth and Ethernet Connectivity options •Integral weighing hook •Practical stackable design for convenient storage •Robust ABS housing, stainless steel pan •AC Adaptor included, 4 AA batteries optional •Model SKX222 •Capacity 220 g •Readability 0.01 g

Designed for education applications, the OHAUS Scout with large backlit LCD backed by education software is the ideal balance for your classroom. It is built to endure demanding classroom applications with superior overload protection. Features including, faster stabilization time, increased capacity, multiple connectivity options and stackable design make Scout the best weighing experience for the next generation classroom. •RS232, USB, Bluetooth and Ethernet Connectivity options •Integral weighing hook •Practical stackable design for convenient storage •Robust ABS housing, stainless steel pan •AC Adaptor included, 4 AA batteries optional •Model SKX422 •Capacity 420 g •Readability 0.01 g

Designed for education applications, the OHAUS Scout with large backlit LCD backed by education software is the ideal balance for your classroom. It is built to endure demanding classroom applications with superior overload protection. Features including, faster stabilization time, increased capacity, multiple connectivity options and stackable design make Scout the best weighing experience for the next generation classroom. •RS232, USB, Bluetooth and Ethernet Connectivity options •Integral weighing hook •Practical stackable design for convenient storage •Robust ABS housing, stainless steel pan •AC Adaptor included, 4 AA batteries optional •Model SKX622 •Capacity 620 g •Readability 0.01 g

Designed for education applications, the OHAUS Scout with large backlit LCD backed by education software is the ideal balance for your classroom. It is built to endure demanding classroom applications with superior overload protection. Features including, faster stabilization time, increased capacity, multiple connectivity options and stackable design make Scout the best weighing experience for the next generation classroom. •RS232, USB, Bluetooth and Ethernet Connectivity options •Integral weighing hook •Practical stackable design for convenient storage •Robust ABS housing, stainless steel pan •AC Adaptor included, 4 AA batteries optional •Model SKX1202 •Capacity 1200 g •Readability 0.01 g

Designed for education applications, the OHAUS Scout with large backlit LCD backed by education software is the ideal balance for your classroom. It is built to endure demanding classroom applications with superior overload protection. Features including, faster stabilization time, increased capacity, multiple connectivity options and stackable design make Scout the best weighing experience for the next generation classroom. •RS232, USB, Bluetooth and Ethernet Connectivity options •Integral weighing hook •Practical stackable design for convenient storage •Robust ABS housing, stainless steel pan •AC Adaptor included, 4 AA batteries optional •Model SKX2202 •Capacity 2200 g •Readability 0.01 g

Replacement AC adapter for Ohaus Scout balances.

This compact, sturdy portable balance is ideal for use in harsh working environments, such as education, as it has stainless steel case which is dust and waterproof to IP-65. This balance is simple to use, having membrane keypad with four key operation. •Resolution: 0.1 g •Accuracy: ±0.2 g •Power: 6 x 1.5 AA alkaline batteries (supplied) or AC/DC adaptor (not supplied) •Dust-tight water-protected to IP-65 rating - protected against dust and water splashing •Weighs in kg, g, Ib, oz Ibs/oz •Stainless steel case with adjustable non-slip rubber feet and bulls eye level bubble •175 x 165 mm stainless steel weighing pan •Large 32 mm LCD display with backlight •Automatic backlight when weight is added to the pan •Zero tracking ensures stable and repeatable readings •Stability indicator •Simple four key operation •Plus/Minus weighing •Parts counting from 10, 20, 50 or 100 sample pieces •Overload warning display •Low Battery indication •Auto Power Off can be user disabled for continuous use •Auto Back Light can be user disabled •Dimensions: 245 x 195 x 70 mm • Weight: 2 kg Please note that an AC/DC power adaptor may be purchased separately, BA130660. This adaptor is not waterproof, so the scale is not protected to IP-65 when the adaptor is used.

This Timstar balance has been designed specifically for school use, offering outstanding value combined with smart features for an easy-to-use balance. The tough, durable, ABS housing is designed to withstand field and laboratory environments, while being easy to clean, and protects from accidental spills. With built-in U-Protect™ protection all Timstar balances can withstand excessive overloads. Complete with an AC adapter, plus integral security slot. Features: • Stainless steel pan, diameter 120 mm • Three-point U-Protect™ overload protection • Built in security slot for Kensington™ type lock • Mains powered with optional rechargeable battery • Auto power off • Stackable • Bi-directional RS-232 interface for connection with computers/printers • Adjustable levelling feet with built in spirit level • Breeze/Draft shield to protect from drafts 135 mm x 89mm (D x H) • Full range tare • Units of Measure g/lb/oz/ct/dr/ozt/GN/N/tl T/tl H/tl S/custom • Calibration Push button calibration using external mass • Display digit LCD, 18 mm digits with backlight • Dimensions 178 x 257 x 84 mm (W x D x H) • Net Weight 1.1 kg Applications: • Weighing in grams, newtons and other units • Parts counting • Percentage weighing • Under balance weighing

This Timstar balance has been designed specifically for school use, offering outstanding value combined with smart features for an easy-to-use balance. The tough, durable, ABS housing is designed to withstand field and laboratory environments, while being easy to clean, and protects from accidental spills. With built-in U-Protect™ protection all Timstar balances can withstand excessive overloads. Complete with an AC adapter, plus integral security slot. Features: • Stainless steel pan, diameter 145 mm • Three-point U-Protect™ overload protection • Built in security slot for Kensington™ type lock • Mains powered with optional rechargeable battery • Auto power off • Stackable • Bi-directional RS-232 interface for connection with computers/printers • Adjustable levelling feet with built in spirit level • Breeze/Draft shield to protect from drafts 135 mm x 89mm (D x H) • Full range tare • Units of Measure g/lb/oz/ct/dr/ozt/GN/N/tl T/tl H/tl S/custom • Calibration Push button calibration using external mass • Display digit LCD, 18 mm digits with backlight • Dimensions 178 x 257 x 84 mm (W x D x H) • Net Weight 1.1 kg Applications: • Weighing in grams, newtons and other units • Parts counting • Percentage weighing • Under balance weighing

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

This water bath provides a stable temperature environment with a digital PID temperature control for precision. Featuring a bold LED display of measured temperatures in real time, with increments of 0.1°C. The easy to use controls are splash-proof, with touch keypad for setting temperature and indicator for heating and an over temperature alarm. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. Holds 1 test-tube rack.

This water bath provides a stable temperature environment with a digital PID temperature control for precision. Featuring a bold LED display of measured temperatures in real time, with increments of 0.1°C. The easy to use controls are splash-proof, with touch keypad for setting temperature and indicator for heating and an over temperature alarm. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. Holds 2 test-tube racks.

This water bath provides a stable temperature environment with a digital PID temperature control for precision. Featuring a bold LED display of measured temperatures in real time, with increments of 0.1°C. The easy to use controls are splash-proof, with touch keypad for setting temperature and indicator for heating and an over temperature alarm. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. Holds 4 test-tube racks.

This water bath provides a stable temperature environment with a digital PID temperature control for precision. Featuring a bold LED display of measured temperatures in real time, with increments of 0.1°C. The easy to use controls are splash-proof, with touch keypad for setting temperature and indicator for heating and an over temperature alarm. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. This 22-litre bath incorporates an outlet for a drain tap. Holds 6 test-tube racks.

The Clifton® Gable lid with insulated handle has been designed allowing full use of whole width of a water bath with the lowest height of the gable being 45 mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area. Water evaporation is reduced at elevated temperatures, maintaining water levels in the water bath. The lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top. Fits 8 litre unstirred baths and 9 litre Benchmark bath.

The Clifton® Gable lid with insulated handle has been designed allowing full use of whole width of a water bath with the lowest height of the gable being 45 mm above the bath. This unique feature means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid maximising the bath working area. Water evaporation is reduced at elevated temperatures, maintaining water levels in the water bath. The lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto your bench top. Fits 14 litre unstirred baths and 13 litre Benchmark bath.

Stainless steel. Suitable for test tubes with an external diameter of 25 mm.Can be easily dismantled for cleaning and sterilisation purposes. Dimensions 270 x 70 x 138 mm (L x W x H).

This water bath is designed for general use and is economically priced without compromising quality. An easy to use analogue dial pointer allows temperature setting graduated in 5°C divisions. The bath has an illuminated on/off switch and heater indication lamp. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. Holds 1 test-tube rack.

This water bath is designed for general use and is economically priced without compromising quality. An easy to use analogue dial pointer allows temperature setting graduated in 5°C divisions. The bath has an illuminated on/off switch and heater indication lamp. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. Holds 2 test-tube racks.

This water bath is designed for general use and is economically priced without compromising quality. An easy to use analogue dial pointer allows temperature setting graduated in 5°C divisions. The bath has an illuminated on/off switch and heater indication lamp. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. Holds 4 test-tube racks.

This water bath is designed for general use and is economically priced without compromising quality. An easy to use analogue dial pointer allows temperature setting graduated in 5°C divisions. The bath has an illuminated on/off switch and heater indication lamp. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 100°C. All units incorporate side lifting handles, for ease of carrying and non-slip rubber feet. in use. This 22-litre bath incorporates an outlet for a drain tap. Holds 6 test-tube racks.

Polycarbonate hinged gable lid. The clear polycarbonate enables users to see into the bath during use. It can be hinged back out of the way to access the water bath, ensuring all condensate returns back into the water bath, or the whole lid can be easily removed and replaced for cleaning. Fits 4 litre unstirred baths and 5 litre Benchmark bath.

Polycarbonate hinged gable lid. The clear polycarbonate enables users to see into the bath during use. It can be hinged back out of the way to access the water bath, ensuring all condensate returns back into the water bath, or the whole lid can be easily removed and replaced for cleaning. Fits 8 litre unstirred baths and 9 litre Benchmark bath.

Polycarbonate hinged gable lid. The clear polycarbonate enables users to see into the bath during use. It can be hinged back out of the way to access the water bath, ensuring all condensate returns back into the water bath, or the whole lid can be easily removed and replaced for cleaning. Fits 14 litre unstirred baths and 13 litre Benchmark bath.

Water bath test tube rack, manufactured in 304 specification 18/8 non-magnetic, bright finish stainless steel. Supplied flat, ready to fold to shape and use, with different hole sizes and number of holes available.

Water bath test tube rack, manufactured in 304 specification 18/8 non-magnetic, bright finish stainless steel. Supplied flat, ready to fold to shape and use, with different hole sizes and number of holes available.

A triple water bath featuring three independently controlled unstirred water baths in one unit. Featuring three 4 litre stainless-steel tanks with individual thermostatic controls, allowing each chamber to have a different temperature and water level. Each easy-to-use analogue dial pointer allows temperature setting graduated in 5°C divisions and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C. *Lid available BA220100

A triple water bath featuring three independently controlled unstirred water baths in one unit. Featuring three 4 litre stainless-steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and water level. Each easy-to-use digital control, with up and down key pads, allows temperature setting and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C. *Lid available BA220100

A triple water bath featuring three independently controlled unstirred water baths in one unit. Featuring three 2 litre stainless-steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and water level. Each easy-to-use digital control, with up and down key pads, allows temperature setting and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C. *Lid available BA220100

This shallow form Clifton water bath is perfect for heating small height samples such as micro tubes, micro plates and bottles. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended (not included). Temperature range: Ambient +5°C to 99°C.

The Irwin water bath specifically designed for school science departments. It is built around a Gratnells deep tray and so can be stored in a Gratnells trolley. Water capacity is from 2 to 8 litres. Because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a Clifton Bath, thus it reaches temperature much faster. Digital temperature control will maintain the water temperature within 1°C. Separate temperature sensor which can control the whole bath or an individual test tube 500 W silicone heating element. Particularly suitable for hard water areas as the element may be easily removed and cleaned. Gives additional bench space in the prep room. Light and easy to carry with safety cut-out sensor. Even temperature distribution no stirrer required. Student proof temperature lock. Large capacity will take up to 4 test tube racks. Cost effective and practical solution for all your water bath needs. Comes complete with a lid and Z type test tube rack.

For BA150800/BA180810 Irwin School Water Baths

The Irwin water bath specifically designed for school science departments. It is built around a Gratnells deep tray and so can be stored in a Gratnells trolley. Water capacity is from 2 to 8 litres. Because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a Clifton Bath, thus it reaches temperature much faster. Digital temperature control will maintain the water temperature within 1°C. Separate temperature sensor which can control the whole bath or an individual test tube 500 W silicone heating element. Particularly suitable for hard water areas as the element may be easily removed and cleaned. Gives additional bench space in the prep room. Light and easy to carry with safety cut-out sensor. Even temperature distribution no stirrer required. Student proof temperature lock. Large capacity will take up to 4 test tube racks. Cost effective and practical solution for all your water bath needs. Comes complete with a lid and Z type test tube rack.

This innovative device is a compact dry block heater which can be used as a small scale substitute for the traditional water bath, offering several advantages: • Waterless safe and portable • Six test tubes warmed or cooled between 15 °C and 65 °C • Accepts 16 mm diameter test tubes • Digital display for set point and actual temperature • Safe to use, operates at low voltage • Power supply: 12 V AC/DC adaptor • Dimensions: (L x W x D) 175 x 110 x 105 mm

The Targa Centrifuge (model NE 010G) from Clifton spins at up to 4000 rpm, with an acceleration/deceleration time of approx. 20 seconds. Complete with lid lock safety and lid drop protection. The motor is fitted with a safety cut out device. The lid automatically releases on completion of spinning down samples and includes a visual/audible end alarm. The rotor can only be energised when the lid is correctly closed and locked. A viewing window in the lid enables the rotor motion to be observed. Fitted with non-slip rubber feet for safety. Built to the latest safety standards and supplied with comprehensive operating instructions. •Noise Level: <52 dB •Dimensions (W x D x H): 296 x 412 x 206 mm •3-year warranty

A competitively priced centrifuge to suit education budgets but designed to be used in medical and university research laboratories. With speed range of 300-4500 rpm and maximum rotor capability of x 15 ml tubes the clinical centrifuge allows precise control of time and speed ensuring an efficient separation process. The stable design and noise level of less than 56 dB allows the centrifuge to work without becoming disturbance. The centrifuge's CPU controls all operating parameters including speed and time settings. Operation of the centrifuge can be timed from 30 seconds to 99 minutes or can be run in continuous mode. Timing will only commence when the set speed is reached ensuring that the separation time is highly accurate. The centrifuge breaks gently to preserve separation and not damage samples. The large, user-friendly LCD screen displays all information including RPM and Force. Parameters of the centrifuge can be set and modified after the set speed is reached. quick spin mode is also available which is activated by pressing and holding the 'PULSE' button. The centrifuge can be accelerated to the required speed and held for as long as the button is held down and also has an automatic lid release. When the process is finished this saves time and protects samples from heat build-up. •Max. Speed [rpm]: 300-4500, increment: 100 •Speed Accuracy [rpm]: ±20 •Rotor Capacity: 12 x 10 ml/7 ml/5 ml; 8 x 15 ml •Run Time: 30 sec - 99 min-HOLD (Continuous operation) •Driving Motor: Brushless DC motor •Safety Devices: Autolock lid when centrifuge is spinning •Detailed instruction manual included

A very economical centrifuge that clamps directly to any bench top. It features a table clamp, hand crank and 4 buckets holding tubes up to 15 mL in capacity.

The OHAUS Frontier 5306 is small but powerful mini centrifuge for simple and quick liquid separation. With an 8-place 1.5 mL or 2 mL tube rotor as well as 4 place PCR 8-strip tube rotor, the Frontier™ 5306 can accommodate 0.2 mL strip tubes or 32 individual PCR tubes. With the included adapter, 0.2 mL and 0.5 mL tubes can also be accommodated in the place tube rotor. This centrifuge provides quiet, safe, and easy operation for your everyday quick spin-down applications. With low voltage power input, quiet brushless motor and rubber base that absorbs vibrations, the Frontier 5306 minimizes operational noise and reduces disruptions in the classroom. It is designed with operator safety in mind, and includes rotor imbalance sensor and two safety switches which immediately stop the rotors should the lid open during use. It is also very easy to use simply place your sample in the centrifuge, close the lid, and it will begin to rotate without the press of button. • Speed: - 6,000 rpm • Max. relative centrifuge force: 2,000 g • Max. capacity: x 1.5 mL/2 mL tubes

The Piccolo™ microcentrifuge is easy to use (and clean), economical, and is suitable for most teaching applications, including quick spin-downs, micro-filter separations and cell pelleting. It takes only a small footprint and offers quiet operation. The palm shaped lid, suitable for left or right-handed users, allows quick extraction of tubes and the weighted rubberised base eliminates potential movement and further dampens vibration and noise •Ideal for microcentrifuge tubes •Maximum speed 6,000 rpm •Maximum RFC: 2,000 x g •Included is an 8-place rotor for 1.5 or 2.0 mL tubes •Dimensions: 153 x 128 x 104 mm

The Biochrom WPA CO7500 colorimeter is a value for money instrument that has been designed for use in educational establishments such as schools and colleges. It is compact, lightweight, and ergonomically designed to withstand student use! This makes it ideal for use in busy teaching laboratories. The large display is easy to read, and the instrument is simple to both set up and use, giving rapid results. The samples can be measured in either standard or semi micro 10mm pathlength cuvettes or in 16mm diameter test tubes. This colorimeter is designed to make life easier for technical staff, and to be low maintenance under demanding conditions. The eight filters (440, 470, 490, 520, 550, 580, 600 and 680nm) are encased in an integral filter wheel so filters cannot be accidentally lost or damaged. With no lid needed, this robust instrument is easy to use, clean and store. There is a drain hole at the bottom of the cell compartment so that spillages do not affect the instrument. Lamp life is extended as it is only on during the measurement cycle. Spare lamps are available and easy to install. This versatile machine measures absorbance, % transmission and simple kinetics. When used in kinetics mode - to study rates of reaction, for example, it takes readings approximately every second and these can be sent to a chart recorder (via the analogue output) if required. Alternatively, the results could be downloaded to an Excel spreadsheet for graphing and other manipulation. •Single beam filter based colorimeter covering 440-680nm •Rugged, portable and easy to use •Excellent value for money and ideal for educational applications •Absorbance, % transmission and simple kinetic measurements

Power adaptor for Colorimeter, CO04570.

Power lead for Colorimeter, CO04570.

Facilitates the handling and preparation of cuvettes. Holds 20 cuvettes in numbered positions. Manufactured from polypropylene to withstand sterilisation.

Disposable standard plastic cuvettes, for transmittance through the visible range spectrum (340 to 800nm). Made from Optical Polystyrene (OPS). Path length: 10 mm; Capacity: 4.5 mL.

Disposable standard plastic cuvettes for transmittance through the visible and UV range spectra (280 to 800nm). Made from PMMA. Path length: 10 mm; Capacity: 4.5 mL.

The Mystrica colorimeter delivers high quality performance in a small, robust, user-friendly and affordable package. It has 3 LED light sources emitting red (630nm), green (525nm) or blue (465nm) which are easily selected using the RGB button. You can choose to measure either absorbance or transmittance with the simple press of a button. Absorbance readings are shown from .000 to 1.999 and transmittance is shown from 100.0 to 0.1%. The power switches off after 2 minutes to conserve battery life, unless it is connected to a PC, tablet or phone. This colorimeter allows the use of 12 mm test tubes as well as standard 4.5 mL cuvettes, creating a more versatile unit. Features: • Wireless connection to iPads, iPhones and Android™ devices • Mystrica Colorimeter app available on the App Store and Google Play™ • Each colorimeter has unique identity. The app detects all units within range of an iPad or iPhone and allows one to be selected • Collect data as graphs and tables • Continuous data collection or separate readings • Best fit line for rate of reaction • Email results as .csv file for analysis and storage • Fully supported suggestions for practical activities. • Power: 4 x AA batteries (not included) or via USB when connected to computer Price includes 10 plastic cuvettes with caps, a cuvette stand, instructions, USB link and software.

The Medline 50 mL controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

The Medline 100ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

The Medline 250ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support. Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.

Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support. Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod