Appliances

A triple water bath featuring three independently controlled unstirred water baths in one unit. Featuring three 4 litre stainless-steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and water level. Each easy-to-use digital control, with up and down key pads, allows temperature setting and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C. *Lid available BA220100

A triple water bath featuring three independently controlled unstirred water baths in one unit. Featuring three 2 litre stainless-steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and water level. Each easy-to-use digital control, with up and down key pads, allows temperature setting and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C. *Lid available BA220100

This shallow form Clifton water bath is perfect for heating small height samples such as micro tubes, micro plates and bottles. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended (not included). Temperature range: Ambient +5°C to 99°C.

The Irwin water bath specifically designed for school science departments. It is built around a Gratnells deep tray and so can be stored in a Gratnells trolley. Water capacity is from 2 to 8 litres. Because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a Clifton Bath, thus it reaches temperature much faster. Digital temperature control will maintain the water temperature within 1°C. Separate temperature sensor which can control the whole bath or an individual test tube 500 W silicone heating element. Particularly suitable for hard water areas as the element may be easily removed and cleaned. Gives additional bench space in the prep room. Light and easy to carry with safety cut-out sensor. Even temperature distribution no stirrer required. Student proof temperature lock. Large capacity will take up to 4 test tube racks. Cost effective and practical solution for all your water bath needs. Comes complete with a lid and Z type test tube rack.

For BA150800/BA180810 Irwin School Water Baths

The Irwin water bath specifically designed for school science departments. It is built around a Gratnells deep tray and so can be stored in a Gratnells trolley. Water capacity is from 2 to 8 litres. Because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a Clifton Bath, thus it reaches temperature much faster. Digital temperature control will maintain the water temperature within 1°C. Separate temperature sensor which can control the whole bath or an individual test tube 500 W silicone heating element. Particularly suitable for hard water areas as the element may be easily removed and cleaned. Gives additional bench space in the prep room. Light and easy to carry with safety cut-out sensor. Even temperature distribution no stirrer required. Student proof temperature lock. Large capacity will take up to 4 test tube racks. Cost effective and practical solution for all your water bath needs. Comes complete with a lid and Z type test tube rack.

The Targa Centrifuge (model NE 010G) from Clifton spins at up to 4000 rpm, with an acceleration/deceleration time of approx. 20 seconds. Complete with lid lock safety and lid drop protection. The motor is fitted with a safety cut out device. The lid automatically releases on completion of spinning down samples and includes a visual/audible end alarm. The rotor can only be energised when the lid is correctly closed and locked. A viewing window in the lid enables the rotor motion to be observed. Fitted with non-slip rubber feet for safety. Built to the latest safety standards and supplied with comprehensive operating instructions. •Noise Level: <52 dB •Dimensions (W x D x H): 296 x 412 x 206 mm •3-year warranty

A competitively priced centrifuge to suit education budgets but designed to be used in medical and university research laboratories. With speed range of 300-4500 rpm and maximum rotor capability of x 15 ml tubes the clinical centrifuge allows precise control of time and speed ensuring an efficient separation process. The stable design and noise level of less than 56 dB allows the centrifuge to work without becoming disturbance. The centrifuge's CPU controls all operating parameters including speed and time settings. Operation of the centrifuge can be timed from 30 seconds to 99 minutes or can be run in continuous mode. Timing will only commence when the set speed is reached ensuring that the separation time is highly accurate. The centrifuge breaks gently to preserve separation and not damage samples. The large, user-friendly LCD screen displays all information including RPM and Force. Parameters of the centrifuge can be set and modified after the set speed is reached. quick spin mode is also available which is activated by pressing and holding the 'PULSE' button. The centrifuge can be accelerated to the required speed and held for as long as the button is held down and also has an automatic lid release. When the process is finished this saves time and protects samples from heat build-up. •Max. Speed [rpm]: 300-4500, increment: 100 •Speed Accuracy [rpm]: ±20 •Rotor Capacity: 12 x 10 ml/7 ml/5 ml; 8 x 15 ml •Run Time: 30 sec - 99 min-HOLD (Continuous operation) •Driving Motor: Brushless DC motor •Safety Devices: Autolock lid when centrifuge is spinning •Detailed instruction manual included

A very economical centrifuge that clamps directly to any bench top. It features a table clamp, hand crank and 4 buckets holding tubes up to 15 mL in capacity.

The OHAUS Frontier 5306 is small but powerful mini centrifuge for simple and quick liquid separation. With an 8-place 1.5 mL or 2 mL tube rotor as well as 4 place PCR 8-strip tube rotor, the Frontier™ 5306 can accommodate 0.2 mL strip tubes or 32 individual PCR tubes. With the included adapter, 0.2 mL and 0.5 mL tubes can also be accommodated in the place tube rotor. This centrifuge provides quiet, safe, and easy operation for your everyday quick spin-down applications. With low voltage power input, quiet brushless motor and rubber base that absorbs vibrations, the Frontier 5306 minimizes operational noise and reduces disruptions in the classroom. It is designed with operator safety in mind, and includes rotor imbalance sensor and two safety switches which immediately stop the rotors should the lid open during use. It is also very easy to use simply place your sample in the centrifuge, close the lid, and it will begin to rotate without the press of button. • Speed: - 6,000 rpm • Max. relative centrifuge force: 2,000 g • Max. capacity: x 1.5 mL/2 mL tubes

The Piccolo™ microcentrifuge is easy to use (and clean), economical, and is suitable for most teaching applications, including quick spin-downs, micro-filter separations and cell pelleting. It takes only a small footprint and offers quiet operation. The palm shaped lid, suitable for left or right-handed users, allows quick extraction of tubes and the weighted rubberised base eliminates potential movement and further dampens vibration and noise •Ideal for microcentrifuge tubes •Maximum speed 6,000 rpm •Maximum RFC: 2,000 x g •Included is an 8-place rotor for 1.5 or 2.0 mL tubes •Dimensions: 153 x 128 x 104 mm

The Biochrom WPA CO7500 colorimeter is a value for money instrument that has been designed for use in educational establishments such as schools and colleges. It is compact, lightweight, and ergonomically designed to withstand student use! This makes it ideal for use in busy teaching laboratories. The large display is easy to read, and the instrument is simple to both set up and use, giving rapid results. The samples can be measured in either standard or semi micro 10mm pathlength cuvettes or in 16mm diameter test tubes. This colorimeter is designed to make life easier for technical staff, and to be low maintenance under demanding conditions. The eight filters (440, 470, 490, 520, 550, 580, 600 and 680nm) are encased in an integral filter wheel so filters cannot be accidentally lost or damaged. With no lid needed, this robust instrument is easy to use, clean and store. There is a drain hole at the bottom of the cell compartment so that spillages do not affect the instrument. Lamp life is extended as it is only on during the measurement cycle. Spare lamps are available and easy to install. This versatile machine measures absorbance, % transmission and simple kinetics. When used in kinetics mode - to study rates of reaction, for example, it takes readings approximately every second and these can be sent to a chart recorder (via the analogue output) if required. Alternatively, the results could be downloaded to an Excel spreadsheet for graphing and other manipulation. •Single beam filter based colorimeter covering 440-680nm •Rugged, portable and easy to use •Excellent value for money and ideal for educational applications •Absorbance, % transmission and simple kinetic measurements

Power adaptor for Colorimeter, CO04570.

Power lead for Colorimeter, CO04570.

Facilitates the handling and preparation of cuvettes. Holds 20 cuvettes in numbered positions. Manufactured from polypropylene to withstand sterilisation.

Disposable standard plastic cuvettes, for transmittance through the visible range spectrum (340 to 800nm). Made from Optical Polystyrene (OPS). Path length: 10 mm; Capacity: 4.5 mL.

Disposable standard plastic cuvettes for transmittance through the visible and UV range spectra (280 to 800nm). Made from PMMA. Path length: 10 mm; Capacity: 4.5 mL.

The Mystrica colorimeter delivers high quality performance in a small, robust, user-friendly and affordable package. It has 3 LED light sources emitting red (630nm), green (525nm) or blue (465nm) which are easily selected using the RGB button. You can choose to measure either absorbance or transmittance with the simple press of a button. Absorbance readings are shown from .000 to 1.999 and transmittance is shown from 100.0 to 0.1%. The power switches off after 2 minutes to conserve battery life, unless it is connected to a PC, tablet or phone. This colorimeter allows the use of 12 mm test tubes as well as standard 4.5 mL cuvettes, creating a more versatile unit. Features: • Wireless connection to iPads, iPhones and Android™ devices • Mystrica Colorimeter app available on the App Store and Google Play™ • Each colorimeter has unique identity. The app detects all units within range of an iPad or iPhone and allows one to be selected • Collect data as graphs and tables • Continuous data collection or separate readings • Best fit line for rate of reaction • Email results as .csv file for analysis and storage • Fully supported suggestions for practical activities. • Power: 4 x AA batteries (not included) or via USB when connected to computer Price includes 10 plastic cuvettes with caps, a cuvette stand, instructions, USB link and software.

The Medline 50 mL controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

The Medline 100ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

The Medline 250ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings. • Case construction: Steel, with chemical resistant coating • Thermal Insulation: Moulded silica powder • Heating Element: Nichrome wire • Mantle: Woven glass fibre mat • Element Temperature: Up to 450°C (Max) • Power Supply: 230V AC.

Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support. Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.

Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support. Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing. • Electronic temperature regulation • Variable temperature control • Inner vessel thermally isolated • Chromium-nickel heating elements • Power off/on and heating-up lamps • Includes fixing for retort rod

Reaction heater block for round bottom flasks (one flask capacity), suitable for use with the hotplate stirrer ST150100. Made from solid aluminium, this block, when used with suitable hotplate, offer useful alternative to a heating mantle, making the hotplate/stirrer even more versatile. 100 mL flask size.

Compact, portable, solid plate design which is sealed against spillages with a durable easy to clean polished steel finish. Variable heat control from simmer to boil. •Cast iron hotplate •Variable heat settings •Overheat protection •Corrosion resistant •Power indicator •Easy clean finish •Non-slip rubber feet •Hotplate diameter: 185 mm •Power: 1500 W

This robust hotplate and magnetic stirrer is made of stainless steel with a ceramic to coating resist corrosion. It also has a separated safety circuit which will automatically stop heating when temperature reaches 350 degrees. The variable speed motor is designed to stay at a constant speed even during change in load. High magnetic adhesion ensures that the stirrer bar stays stable at the bottom of the container. It features an enclosed assembly with protection class IP42 and a DC brushless motor which guarantees long product life. A block heater, ST150115 is available as an accessory.

Designed with a microprocessor-controlled dual thermocouple, this hot plate offers accurate temperature control and protection from overheating. A coloured LED indicator surrounds the heat control knob illuminating the actual surface temperature in real time. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250-mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit also includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Includes an integral fitting for a retort rod and allows the retort base to slide underneath. This unit has a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.

This analogue hotplate offers a large heating area of 180 x 180 mm with safe controlled heating up to 400°C. Constructed from chemically resistant ceramic coated steel, this hotplate delivers excellent reliability with reproducible results at a sensible price. A screwed 12.5 mm screwed thread is included for the addition of a retort rod (not included).

2.2 kW fast boiling jug kettle, with automatic switch off when boiling and safety boil-dry cut out. Capacity: 1.7 L. Please note the kettle colour may vary.

White, 1.5 litre capacity food blender with removable stainless steel blades for easy cleaning. The unit has speeds, pulse function, and non-slip feet. 400 rating.

Comprising an aluminium lamp house on a flexible stem attached to a heavy base with in-line mains on/off switch. Maximum 40 W SES lamp bulb (not supplied). Complete with 13 A plug. Dimensions (H): 365 mm, base diameter 140 mm. Please note colour may vary.

A mains operated ultraviolet light source ideally suited to demonstration use. Comes complete with on/off switch. The tube is 450 mm long and is housed in powder coated steel with back reflector. Suitable for showing the fluorescing properties of chemicals (eg. washing powder) and for work in the new Forensic Science part of the syllabus. Emits UVA light.

The Spider power supply has been specifically designed for primary, middle and lower secondary school use. Offering 1.5, 3, 4.5 or 6 V smoothed and regulated DC at up to 1 A, it is the ideal next step from using cells and batteries. Four sets of terminals mean it can be used by four groups simultaneously enabling children to connect a multitude of low voltage electrical devices with the spider's bright LED's acting as power output monitors. •Manufactured in the UK •No batteries needed •4 x 4 mm output terminals •Compact and safe design •Fun to use

A compact power supply offering 2, 4, 6, 8, 10, and 12 V at currents of up to 5 A. Both DC and AC outputs may be used simultaneously up to the rated output. The output is protected by a push button cut-out. The unit is 2 A fused on the back panel and comes complete with a moulded mains lead and plug. 4 units are designed to fit in a shallow Gratnell tray. Specification •Input Supply voltage 230 V DC •Supply frequency 50 Hz •Mains fuse Rear panel 2 A, 20 mm quick blow Mains plug 3 A •Output Voltage 2, 4, 6, 8, 10, 12 V AC nominal 1, 3, 5, 7, 9, 11 V full wave rectified DC nominal •Maximum output current 5 A AC or DC •Manufactured in the UK

The Powerlock power supply has both lockable AC and DC outputs ranges by a simple key making it impossible for students to change the voltage. The Powerlock offers 2, 4, 6, 8, 10 and 12 V in both DC and AC. Outputs may also be used simultaneously up to the rated output required. For safety, the output is also protected by a simple push button cut-out. Supplied with 2 keys. •Output voltages AC & DC •2, 4, 6, 8, 10, 12 V range in AC and DC •Current 5 A •Voltage type - Stepped •Output type - Full wave rectified, non-regulated •Push button trip reset •Mains input 230/240 V AC, 50 Hz •Supplied with mains plug and lead •Manufactured in the UK

The Powerbase is ideal for use in physics, biology and chemistry experiments in secondary and sixth form schools. It comes with a sturdy, powder-coated steel case with fold flat carry handle making it easily stackable. A very popular power supply that has proven to last the rigours of daily use within schools with its tough construction and tamper proof fixings. •0-15 V AC and 0-20 V smoothed DC at up to 8 A •Combined Continuously variable output •Maximum voltage lock push button reset •Short circuit protection •Tough steel powder coated casing •Heavy-duty screw-in rubber feet •Stackable •Supplied with power lead •Designed and manufactured in the UK •5 Year Warranty

A highly versatile power supply for all low-voltage experiments, with continuous voltage adjustment, separate for DC and AC. The two outputs can be loaded simultaneously without interference. Four digital displays show DC and AC voltage and current. The continuously adjustable DC current limiter can be set using a screwdriver. There is an LED indicator to show when the selected maximum current is reached. The power supply also features electronic overload protection. Specifications DC Output voltage: 0-24 V (stabilised) Ripple and noise (max): 25 mVpp Output current (max): 10 A (0-12 V) Max output current falls linearly to 6 A at 24 V Electronic, continuously adjustable current limiter, adjusted with screwdriver AC Output voltage: 0-24 V (stabilised sine) Output current (max): 6 A Electronic current limiter

The perfect choice for experiments with, for example, electron beam tubes requiring voltages up to 500 V DC at a low current level. The unit also provides two auxiliary outputs: A continuously variable negative voltage (down to -50 V DC), series connected with the 500 V output, and a stepwise selectable AC voltage with galvanic isolation from the DC outputs. Continuous adjustment of the -50 V and 500 V voltages. The current is limited to 50 mA. Voltage and current can be read from separate displays. A switch selects which output to monitor. The AC output delivers up to 3 A and is provided with a thermo fuse. Note: Not recommended for students due to high output current. Specifications Negative DC voltage: 0 to -50 V Current (max): 50 mA Positive DC voltage: 0 to +500 V Current (max): 50 mA Ripple: less than 0.1% Regulation: Better than 1 % for variations in mains voltage and load up to 10 %. AC Voltage: 2 to 7 V (1 V steps) Current (max): 3 A

This power supply delivers stabilised DC voltage, continuously adjustable between 0 and 6 kV. For safety, the current is limited by a built-in series resistance. The short-circuit current is 2 mA max. Under load, the voltmeter shows the actual supplied voltage. The power supply is also capable of delivering 6.3 V (max. 3 A) AC. This is the standard voltage for many electron tubes etc. On the front, you find a yellow/green ground socket, connected to the metal enclosure and hence (through the mains wire) to earth. The high voltage section floats relative to ground, allowing either the black (negative) socket or the red (positive) socket to be connected to ground, resulting in a voltage range of 0 to +6 kV resp. 0 to -6 kV relative to ground. Specifications •DC Voltage: 0 - 6 kV. Stabilised, continuously adjustable •Short-circuit current (max): 2 mA •Ripple and noise (max): 1% (RMS, 100 V - 6 kV) •Read-out precision: 1% + 1 digit •AC Voltage: 6.3 V •Current (max): 3 A

This power supply delivers stabilised DC, continuously adjustable from 0 to 12 V. It also supplies AC, selectable between 2, 4, 6 and 12 V. The AC voltage is not stabilised. Both outputs have overload protection. The DC channel is electronically protected and automatically reconnects while the AC channel has a circuit breaker which must be manually reconnected if it trips. Specifications •DC Output voltage: 0 - 12 V (stabilised) •Ripple and noise (max.): 100 mV •Output current (max.): 3 A •AC Output voltage: 2, 4, 6, 12 V •Output current (max.): 3 A

A simple, robust and reliable power supply, ideal for basic electricity experiments. It offers stepped adjustment of both AC and DC with 1 V between the steps. The DC voltage is not smoothed or stabilised, meaning there is a fluctuation of approx. 10% of the output voltage at step level. The unit is protected against overload with an automatic circuit breaker (the unit works again after about 10 seconds). DC voltage: 1 to 12 in 1 V steps Current: 6 A max AC voltage: 1 to 12 in 1 V steps Current: 6 A max

This has to be the best signal/function generator available for educational use! Developed in conjunction with physics teachers and designed specifically for education, this unit provides all the functionality you need for physics teaching. really useful feature for those less familiar with using signal generators is that for basic use, you just operate two buttons: One for frequency and one for amplitude that's it! There is, of course, far more sophistication for those who require it. If you want to change waveform or to utilise the step and sweep modes, the display keeps you updated on the status of the generator. Unique frequency control: The frequency is set by speed sensitive button. Turn slowly to set the display's last digit, turn faster and the response accelerates designed to work intuitively in practical experiments. Drives speakers, vibration generator etc. directly: The built-in 10 power amplifier effortlessly drives power appliances e.g. vibration generator. The amplifier can deliver more than amp for all frequencies between 0.001 Hz and 100 kHz. Step mode: In many applications you need to study physical system at fundamental frequency and at different multiples of that frequency. The special step feature makes this task incredibly easy. Once the fundamental frequency has been determined (e.g. of spring connected to vibration generator), other harmonics (or overtones) can be demonstrated by simply pressing button, which changes the frequency to progressive multiples of the fundamental frequency. Sweep mode: The generator can sweep through frequency range in order to discover eventual resonances. You decide the frequency range and the speed. You have the choice between linear sweep (fixed number of Hz per unit time) and logarithmic sweep (fixed number of octaves per unit time). Advanced Features: The generator connects to your PC through standard USB cable and acts as USB flash drive. Custom defined waveforms (e.g. created by means of spreadsheet) can be saved to the generator. Sequences of settings can be programmed for automatic execution.

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

The Benchmark ™ digital water bath has been specifically designed for use in schools and colleges. UK designed and manufactured with a 304 grade stainless steel tank steel outer casing with antibacterial paint surface. Features: •Easy to use digital temperature control, from ambient +5°C to 95°C •Temperature stability @45°C: ±0.25°C •Temperature display: 1°C, auto-locking of set temperature, preventing inadvertent adjustment in use •Low water run dry protection: Self resetting cut out •Gated, large bore drain tap, for convenient bath emptying fitted on all bath sizes •Stainless steel perforated base tray •Heater concealed under tank, making cleaning easy •3 year warranty * Please note: Gated drain tap adds an additional 40mm to the overall width. For full range of accessories, please use the 'Clifton' range from Nickel Electro, which is compatible with the Benchmark range of water baths.

Replacement adapter for Timstar Standard, Core Portable and Dune Compact balances.

Rimless, conical, soda glass. 15 mL capacity, 17 mm diameter. Dimensions: 111 x 17 mm.