TSL

Mainly Jelutong, a mild working close grained hardwood. Supplied in 600mm lengths. Block Pack - 52 pieces of round, rectangular and square blocks.

Grade E1 low formaldehyde content. Less than or equal to 8mg to100g of product. Pack of 36 sheets. Approximate sheet size 60 x 300 x 6mm To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion. Not recommended for use on a laser cutter.

Grade E1 low formaldehyde content. Less than or equal to 8mg to100g of product. Pack of 36 sheets. Approximate sheet size 610 x 300 x 3mm To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion. Not recommended for use on a laser cutter.

Mild Steel Rod 6mm diameter, length 1500mm.

• Super value bulk box of graphite pencils • Hexagonal polished barrels in standard size • Quality HB graphite lead

With a low level tack, this masking tape won't leave any marks when it's peeled. The tape can also be drawn on to mark specific areas. Pack of 16 50m x 19mm rolls.

Retractable craft Knife Compatible blades: 190-320, 190-321 and 400-101.

Contains 19mm roughing out gouge, 10mm spindle gouge, 6mm parting off tool, 13mm round nose scraper & 13mm skew chisel.

Guided by the circular rim, bores any arc of a circle. Radial cutting edges, titanium-coated for extended life. Bores a true, flat-bottomed hole. Rapid removal of waste. Sizes 12, 16, 20, 22, 26, 30, 35mm.

Traditional cork block, standard size.

Manufactured using a robust E-Weight paper, these Aluminium Oxide abrasive rolls are ideal for preparing surfaces before painting, and can be used on wood, metal or plastics. The rolls are ideally suited to tradesmen and regular users. Coarse grades are extremely efficient for the quick removal of old paint or tackling rough surfaces. Fine grades are used for achieving smooth finishes. 115mm wide rolls can be used on half sheet sanders when cut to the appropriate length. Professional quality Urea bonded 200g Green paper roll for hand and power sanding on wood, boards, paint, plaster and fillers. Ideal for building trades. 80 grit - Medium 10m roll.

1kg 20mm Panel Pins

It is easy to use, requiring only light cramping to get a good bond. Excess glue can be removed easily with a damp cloth and washes off fingers.

It is easy to use, requiring only light cramping to get a good bond. Excess glue can be removed easily with a damp cloth and washes off fingers.

Eye Protection is a requirement under Regulation 4 of the Personal Protective Equipment At Work Regulation 1992 when at risk in a hazardous area. Schools must provide personal protective equipment that offers suitable protection to personnel who may be exposed to potential health risks. Many day to day tasks can generate flying debris which can seriously injure the eyes. From wood and paint chips to dirt, concrete particles and even nails, a worker's eyes are constantly and most often at risk from impact hazards. Face shields are a combination of a grey browguard and a polycarbonate 205mm visor. All our visors are rated to withstand medium impact EN1663B. And conform to EN166.1.B.3.9 Also suitable for hot metal areas

Green - Low Attentuation Small Cup 80-107 dB • Moderate industrial noise • Workshops • Printing works • Landscaping • Leisure activities

General purpose mini glue sticks suitable for the Bostik handy glue gun. Supplied in either a card of 15 x 100mm long or in 1 kilo bags which contain approximately 220 sticks 100mm long.

Machine screw selection of zinc-plated screws. Sizes: M3 x 8, M4 x 25, M5 x 20, M3 x 12, M3 x 20, M4 x 20, M4 x 40, M5 x 20, M5 x 50, M6 x 30 and M6 x 50.

Sizes M3 x 0.5 x 7.0mm, M4 x 0.8 x 8.0mm, M5 x 1.0 x 10.0mm, M6 x 1.0 x 13.0mm, M8 x 1.0 x 16.0mm, M10 x 1.2 x 19.0mm, M12 x 1.6 x 23.0mm, M6 flexible, M8 flexible, M6 x 25 x 1.6mm and M8 x 32 x 1.6mm.

Sizes M3, M4, M5, M6, M8, M10 and M12. 1000pce (approx).

Supplied with black hour/minute hands (950-395) & red second hands (950-396). Spindle length: 16mm. Pack of 10.

Omega lead-free solder is the ultimate in environmental health management, manufactured in the U.K. from 96% tin, 3.5% silver and 0.5% copper. It is rosin-free, halidefree and has a flux content of 3%. A fast flow solder, with good solderability, minimal clear residue and a melting point of 217°C. 250g reels.

Clear Shatter Resistant Ruler 12inch/30cm

Chrome plated 'W' shape safety rule. For safe cutting with a knife.

Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.

PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.

• Convenient wooden storage tidy • Complete with 32 pairs of children's ruler scissors • Blade ruled in centimetres/millimeters • 26 right-handed and 6 left-handed per set • Scissors: size 133mm (5.25"")

Cut length 680mm 26.75"" x 2mm (A2+ size) • Genuine 20 sheet capacity • Self sharpening tungsten steel blades • Unbreakable head and frame • A size indicators • 5 years guarantee • Cut control plate eliminates overloading

Sturdy plastic clamp, with durable 4m polyester strap & metal tightening screw.

Heavy duty belts for use on wood, plastics & fillers. Sold singly. Size - 1090 x 150mm

315mm Dia, 30mm bore, 14mm pinhole. For accurate sizing and trimming timber and manmade boards. Supplied with standard pinholes including Sedgwick and Scheppach.

Manufactured from high quality 1mm carbon steel, that's been correctly hardened and tempered to ensure the blades strength and straightness while the double ground set of the saw tooth delivers a faster saw cutting performance with optimal sawdust removal in both forward & reverse motions. The finely ground handsaw blade is coated with an ultra-tough lacquer protecting the saws blade from corrosion, whilst easing friction when sawing. The blade is ultrasonically welded to a bespoke ergonomic soft grip handle with a ridge free finger support achieving precise cutting and user comfort, even when used for prolonged periods.

Quality Hardwood Dowel from sustainable sources. Pack of 10, 4mm diameter, 600mm long. Nominal size ± ½ mm.

With 60 assorted rivets.

100 1/8 Long Grip Aluminium Pop Rivet

High carbon steel, hardened and tempered with soft grip handles incorporating hang hole.

Extends the life of sanding belts, discs and sheets, and removes clogging simply and efficiently. 150 x 25 x 25mm.

Nickel plated. Pk/50

High-quality nickel-plated steel split rings. Packs of 100.

This pack contains:? A sample of Polymorph low temperature polymer? A length of smartwire (shape memory alloy) ? A sheet of thermochromic film (liquid crystal technology) ? A sample of lenticular sheet ? An IQ controller (self contained programmable controller)? A brief guide and suggestions for experiments

soLID core - Rated: 1.8A @ 1000V RMS max. size 1/0.6mm. 100 metre reel

For all Antex and most other brands of soldering iron. This stand is adjustable for the model of iron used. It is made from high grade phenolic, has slip resistant feet, and a ballast weight for stability.

soLID core - Rated: 1.8A @ 1000V RMS max.size 1/0.6mm. 100 metre reel

For spindle polishing machines. Made from white cotton with 60 folds giving a mop approximately 1inch wide. Available either stitched for hard use or unstitched for finishing.

Major high distillate oil that contains effective inhibitors to retard rust and tarnish. The 3 in 1 oil comes in a flexi-can with a directional spout to help the application of oil precisely, without spillage.

Understorage lockable cupboard 750mm.

• BSI tested and passed for heavy educational use. • Choose from a range of colours. Some colours have minimum order requirements. • All trays fit standard school furniture • Lids also available • Fully recyclable • HxWxD: 300 x 312 x 430mm

• BSI tested and passed for heavy educational use. • Choose from a range of colours. Some colours have minimum order requirements. • All trays fit standard school furniture • Lids also available • Fully recyclable • HxWxD: 300 x 312 x 430mm

Hexagonal six pupil premium workbench, including 7inch fitted quick release wood vices. Each heavy duty steel foot is adjustable to cope with the most uneven of floors. The frame is made up from only five components and 8 bolts and takes 5 minutes to assemble with the Allen keys provided.

• Fits all standard trays (Shallow, deep, extra deep and jumbo - F1, F2, F25 and F3) • Translucent to easily see contents • HxWxD: 32 x 284 x 430mm

Nylon coated tray runners for Gratnells trolleys.

• 6 compartments • Supplied in packs of 6 • Fits shallow (F1) trays only • Ref IN6 • Compartments measure 164mm by 80mm. • HxWxD: 40 x 275 x 338mm

FEATURES: • Flexible, having corner units and extension desks • PECT Trunking fits onto these workstations. • Cantilever Desks come in 3 lengths 1200, 1500 and 1800mm • Cantilever Desks come in 2 widths 600 and 800mm • The Corner Desks Come in 2 widths 600 and 800mm This cantilever desk is 1200 x 800mm.

FEATURES: • Flexible, having corner units and extension desks • PECT Trunking fits onto these workstations. • Cantilever Desks come in 3 lengths 1200, 1500 and 1800mm • Cantilever Desks come in 2 widths 600 and 800mm • The Corner Desks Come in 2 widths 600 and 800mm This cantilever desk is 1500 x 800mm.

Left end cap for PECT trunking

FEATURES: • Flexible, having corner units and extension desks • PECT Trunking fits onto these workstations. • Cantilever Desks come in 3 lengths 1200, 1500 and 1800mm • Cantilever Desks come in 2 widths 600 and 800mm • The Corner Desks Come in 2 widths 600 and 800mm This cantilever desk is 1200 x 600mm.

1200 Underbench Storage c/w lockable sliding doors and shelves. Full length underbench cupboard with shelves and sliding lockable doors in light grey

Hexagonal six pupil premium workbench, including 7inch fitted quick release wood vices, under storage cupboard and shelves. Each heavy duty steel foot is adjustable to cope with the most uneven of floors. The frame is made up from only five components and 8 bolts and takes 5 minutes to assemble with the Allen keys provided.

Underbench Storage/Shelves for 1500 Cantilever Desk. Full length underbench cupboard with shelves and sliding lockable doors in light grey

1500 Cantilever Desk Underbench Storage/Trays. Full length underbench cupboard with Gratnell trays and sliding lockable doors. Comes in light grey as standard, other colours available on request. Trays come in Dark grey as standard but are available in a wide variety of colours on request.

Multi-purpose stool 560mm high, complete with footrest. The seat is polypropylene and is available in a selection of colours (green, blue or red). Metal frame is powder coated in Charcoal grey and the stools are manufactured in the UK. *Image shows 3 stools illustrating the available seat colours, price is for the supply of one stool.

Kit: 5 x single tool hook 50mm 5 x single tool hook 25mm 5 x double tool hook 25mm 5 x double tool hook 75mm 5 x double tool hook 150mm 5 x double tool hook 100mm 5 x plier hooks 55mm 5 x spring clips 6mm 5 x spring clips 13mm 5 x spring clips 19mm 5 x spring clips 25mm 1 x spanner unit 1 x hacksaw storage unit 1 x screwdriver unit 1 x allen key holder 1 x drill holder

Create a fully equipped mobile maintenance workshop with this product. Drawers, lockable storage cupboard and tough beech multiplex worktop. • Welded steel construction • Lockable cupboard with adjustable height, galvanised steel shelf • Shelf capacity is 60Kg U.D.L • 50Kg U.D.L capacity, 100% extension drawers • Drawer blocking to prevent accidental opening • Push - pull handle • Maximum load capacty 200Kg • Powdercoat RAL5010 blue/ RAL7035 grey finish • Built to last 10 years guarantee Dimensions: (WxDxH): 1050 x 550 x 980mm 3 x 100mm, 2 x 125mm, 1 x 175mm & 1 x 725 cupboard with shelf.

• Flush no-snag handles • Liquid tight sumps • Robust steel construction • Reinforced doors • Removable sump tray • Warning symbols supplied • Powder coated finish • Supplied with three adjustable shelves • Dimensions: (HxWxD): 1800 x 900 x 460mm

Mobile flammables cupboard. • Flush no-snag handles • Supplied with 1 shelf • Liquid tight sumps • Robust steel construction • Reinforced doors • Sump tray • Warning symbols supplied • Powder coated finish • Dimensions (HxWxD): 1040 x 900 x 460mm

Fixed fhazardous cupboard. (Mobile option available 950-094). • Flush no-snag handles • Supplied with 1 adjustable perforated shelf • Liquid tight sumps • Robust steel construction • Reinforced doors • Removable sump tray • Warning symbols supplied • Powder coated finish • Dimensions (HxWxD): 900 x 900 x 460mm

Manufactured from prime steel with instantly recognisable identification symbols and clean white powder coat finish. These cupboards are designed to meet a wide range of first aid needs. • All steel construction • Reinforced for extra strength • Adjustable shelves • Identification labelling • Durable clean white finish • Hygienic easy clean design • Resilient powder coated finish. HxWxD: 570 x 850 x 255mm

They have pivoted doors to allow runs of cupboards to be created. The drawers glide on roller bearings even when fully loaded (75kg capacity). The shelves are adjustable. Security ensured with a locking system. The back of the cupboard is perforated allowing you to fit hook kits. HxWxD: 2000 x 1050 x 650mm. Tools & accessories not included. With 2 shelves and 4 drawers

They have pivoted doors to allow runs of cupboards to bencreated. The shelves have 100kg capacity and are adjustable. Security ensured with a locking system. The inside of the door panels areperforated allowing you to fit hook kits. HxWxD: 2000 x 1050 x 650mm. With 4 shelves

• Flush no-snag handles • 1 non-perforated fixed shelf • No sump tray • Robust steel construction • Reinforced double-doors • Warning symbols supplied • Powder coated finish • Lockable for added security • Pre-drilled for wall mounting • Fixings not supplied • Dimensions (HxWxD): 560 x 850 x 255mm

• Floor or bench mounted • Flush no-snaghandles • Supplied with 1 shelf - Extra shelves available • Robust steel construction • Warning symbols supplied • Powder coated finish • Lockable for added security • Dimensions (HxWxD): 700 x 350 x 300mm

Heavy duty Record No. 1 vice 3inch (75mm) with a jaw opening to 90mm. Must be ordered with a bench for fitting.

Octagonal bench, fully versitile for use as an academic or practicle workstation. • Can accommodate 8 pupils and 8 vices. • Birch plywood carcase. • 4 point access provides the opportunity for tool management and work piece storage. • Woodwork vices and bench hold-fasts are optional extras. • Standard sizes (mm) width 1830 across flats of top. height 810 option.

Square rail, solid beech timber frame with full length cupboard. Fitted with a beech well top with a flip over centre panel. • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Dimensions: 1200 x 1200mm • Heights available 810mm or 860mm please state when ordering

Square rail, solid beech timber frame with full lenth cupboard. Fitted with a solid beech cleated and drawbolted flush top.Fitted vices need to be specified separately and ordered at the same time as the bench. • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Dimensions: 1200 x 1200mm • Heights available 810mm or 860mm please state when ordering

Octagonal Steel Frame Workbench with Solid Beech Top Type Z.

Octagonal bench, fully versitile for use as an academic or practicle workstation. • Can accommodate 8 pupils and 8 vices. • Birch plywood carcase. • 4 point access provides the opportunity for tool management and work piece storage. • Woodwork vices and bench hold-fasts are optional extras. • 6mm MDF cover tops available - 530-631 • Standard sizes (mm) width 1830 across flats of top. height 810 option. Vices not included.

Increasingly popular in bench design, fully versatile for use as an academic or practical workstation. • Can accommodate 8 pupils and 8 woodwork vices. • Steel frame available in a choice of colours to suit individual classroom layouts. • Woodwork vices and bench hold-fasts are optional extras. • Standard sizes (mm) width 1830 across flats of top, height 810mm or 860mm. Choice of tops: 530-672W - MDF 530-672Z - Beech (Solid)

This is a fitted vice and must be ordered with a bench for fitting.

Underbench storage/shelves for 1500 mobile workbench. Under bench cupboard fitted with lockable sliding doors and a shelf in each side.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Optional 6mm reversible loose cover tops available - (530-673). • Standard sizes (mm) 1220 square tops x height 810mm. Vices not included.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Standard sizes (mm) 1220 square tops x height 810mm.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Optional 6mm reversible loose cover tops available - (530-673). • Standard sizes (mm) 1220 square tops x height 810mm. All benches exclude vices (sold separately).

1200mm2 heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Heavy duty steel frame. • MDF top. • 2 door cupboards. • Can be fitted with 4 xwoodwork vices. • 1220 square tops, 860mm high.

The trunking is modular and designed to mix and match types together into continuous runs including corner sections using joining brackets. The low voltage electronics have affective and safe short circuit protection built-in which immediately shuts the supply down if a short is introduced and resets when that is removed. The system is now provided with a buzzer alarm when a short circuit is produced. FEATURES: • Rugged, tamperproof and safe • Modular mix and match types into continuous runs including corner sections • Short circuit alarm • Come in 3 lengths 1200, 1500 and 1800mm PECT TRUNKING MAINS ONLY This trunking provides mains power only. They are fitted with two twin 13A switched sockets internally wired. Available also with 24v soldering iron sockets and other standard options. This trunking is 1500mm in length.

The trunking is modular and designed to mix and match types together into continuous runs including corner sections using joining brackets. The low voltage electronics have affective and safe short circuit protection built-in which immediately shuts the supply down if a short is introduced and resets when that is removed. The system is now provided with a buzzer alarm when a short circuit is produced. FEATURES: • Rugged, tamperproof and safe • Modular mix and match types into continuous runs including corner sections • Short circuit alarm • Come in 3 lengths 1200, 1500 and 1800mm PECT TRUNKING MAINS ONLY This trunking provides mains power only. They are fitted with two twin 13A switched sockets internally wired. Available also with 24v soldering iron sockets and other standard options. This trunking is 1800mm in length.

Steel frame in powder coated grey. HxWxD: 1200 x 746 x 266mm.

Fitted with a 5inch woodwork vice and 3inch engineers vice as standard.* Bench includes contrasting edging for visual impairment - DDA comliance. Adjustable height from 670-970mm *It is not recommended to fit vices larger than these specified.

Solder outlets for PECT trunking.

Jointing brackets for PECT trunking

These are a 5 volt dc supply and dual rail +/- 2-15 volt variable supply set by reading the accurate analogue volt meter. The dual rail supply is switch controlled and when off doubles the output from 1 amp to 2 amps. Now fitted with a buzzer alarm when the low voltage supplies are short circuited. This trunking has a length of 1200mm.

These are a 5 volt dc supply and dual rail +/- 2-15 volt variable supply set by reading the accurate analogue volt meter. The dual rail supply is switch controlled and when off doubles the output from 1 amp to 2 amps. Now fitted with a buzzer alarm when the low voltage supplies are short circuited. This trunking has a length of 1500mm.

1200mm2 heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted • Choice of tops • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm² heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted* • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm² heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Steel frame available in a wide choice colours. • Solid beech top with flip over central well illustrated • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Optional 6mm reversable loose cover tops available • Standard sizes (mm) 1220 square tops, height 810 option.

1200mm2 heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Steel frame available in a wide choice colours. • Solid beech top with flip over central well illustrated • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Optional 6mm reversable loose cover tops available • Standard sizes (mm) 1220 square tops, height 810 option.

1200mm² heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted • Choice of tops • Choice of frame colours • Standard sizes 1220mm square *Vices not included

Record No.1 3inch jaw, opening to 3¼inch with replaceable serrated jaws. This vice is fitted to a catchment tray, for use in a woodwork vice.

1200mm2 heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted* • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm squared heavy duty powder coated diagonal steel frame. A maximum of 4 x woodwork or 4 x metal work vices can be fitted. • Beech well top. • Cross stretcher design provide ample leg room for seated users and wheelchair access. • Standard sizes 1220mm square and 860mm high.