TSL - Technology

Square rail, solid beech timber frame with full lenth cupboard. Fitted with a solid beech cleated and drawbolted flush top.Fitted vices need to be specified separately and ordered at the same time as the bench. • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Dimensions: 1200 x 1200mm • Heights available 810mm or 860mm please state when ordering

Octagonal Steel Frame Workbench with Solid Beech Top Type Z.

Octagonal bench, fully versitile for use as an academic or practicle workstation. • Can accommodate 8 pupils and 8 vices. • Birch plywood carcase. • 4 point access provides the opportunity for tool management and work piece storage. • Woodwork vices and bench hold-fasts are optional extras. • 6mm MDF cover tops available - 530-631 • Standard sizes (mm) width 1830 across flats of top. height 810 option. Vices not included.

Increasingly popular in bench design, fully versatile for use as an academic or practical workstation. • Can accommodate 8 pupils and 8 woodwork vices. • Steel frame available in a choice of colours to suit individual classroom layouts. • Woodwork vices and bench hold-fasts are optional extras. • Standard sizes (mm) width 1830 across flats of top, height 810mm or 860mm. Choice of tops: 530-672W - MDF 530-672Z - Beech (Solid)

This is a fitted vice and must be ordered with a bench for fitting.

Underbench storage/shelves for 1500 mobile workbench. Under bench cupboard fitted with lockable sliding doors and a shelf in each side.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Optional 6mm reversible loose cover tops available - (530-673). • Standard sizes (mm) 1220 square tops x height 810mm. Vices not included.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Standard sizes (mm) 1220 square tops x height 810mm.

1200mm squared diagonal rail timber frameheavy duty bench, suitable for stools and wheelchair access. Maximum of 4 woodwork vices. • Handy bottom shelf provides rigidity and storage. • Available with perimeter bottom rails. • Woodwork, metalwork vices and hold-fasts are optional extras. • Optional 6mm reversible loose cover tops available - (530-673). • Standard sizes (mm) 1220 square tops x height 810mm. All benches exclude vices (sold separately).

1200mm2 heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Heavy duty steel frame. • MDF top. • 2 door cupboards. • Can be fitted with 4 xwoodwork vices. • 1220 square tops, 860mm high.

The trunking is modular and designed to mix and match types together into continuous runs including corner sections using joining brackets. The low voltage electronics have affective and safe short circuit protection built-in which immediately shuts the supply down if a short is introduced and resets when that is removed. The system is now provided with a buzzer alarm when a short circuit is produced. FEATURES: • Rugged, tamperproof and safe • Modular mix and match types into continuous runs including corner sections • Short circuit alarm • Come in 3 lengths 1200, 1500 and 1800mm PECT TRUNKING MAINS ONLY This trunking provides mains power only. They are fitted with two twin 13A switched sockets internally wired. Available also with 24v soldering iron sockets and other standard options. This trunking is 1500mm in length.

The trunking is modular and designed to mix and match types together into continuous runs including corner sections using joining brackets. The low voltage electronics have affective and safe short circuit protection built-in which immediately shuts the supply down if a short is introduced and resets when that is removed. The system is now provided with a buzzer alarm when a short circuit is produced. FEATURES: • Rugged, tamperproof and safe • Modular mix and match types into continuous runs including corner sections • Short circuit alarm • Come in 3 lengths 1200, 1500 and 1800mm PECT TRUNKING MAINS ONLY This trunking provides mains power only. They are fitted with two twin 13A switched sockets internally wired. Available also with 24v soldering iron sockets and other standard options. This trunking is 1800mm in length.

Steel frame in powder coated grey. HxWxD: 1200 x 746 x 266mm.

Fitted with a 5inch woodwork vice and 3inch engineers vice as standard.* Bench includes contrasting edging for visual impairment - DDA comliance. Adjustable height from 670-970mm *It is not recommended to fit vices larger than these specified.

Solder outlets for PECT trunking.

Jointing brackets for PECT trunking

These are a 5 volt dc supply and dual rail +/- 2-15 volt variable supply set by reading the accurate analogue volt meter. The dual rail supply is switch controlled and when off doubles the output from 1 amp to 2 amps. Now fitted with a buzzer alarm when the low voltage supplies are short circuited. This trunking has a length of 1200mm.

These are a 5 volt dc supply and dual rail +/- 2-15 volt variable supply set by reading the accurate analogue volt meter. The dual rail supply is switch controlled and when off doubles the output from 1 amp to 2 amps. Now fitted with a buzzer alarm when the low voltage supplies are short circuited. This trunking has a length of 1500mm.

1200mm2 heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted • Choice of tops • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm² heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted* • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm² heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Steel frame available in a wide choice colours. • Solid beech top with flip over central well illustrated • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Optional 6mm reversable loose cover tops available • Standard sizes (mm) 1220 square tops, height 810 option.

1200mm2 heavy duty square rail steel frame fitted with 2 door cupboard. Ideal for all woodwork and metalwork activities. • Steel frame available in a wide choice colours. • Solid beech top with flip over central well illustrated • Optional 2 or 4 lockable doors, shelves or sub-divides within cupboards. • Woodwork vices, planing stops and bench hold-fasts are optional extras. • Optional 6mm reversable loose cover tops available • Standard sizes (mm) 1220 square tops, height 810 option.

1200mm² heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted • Choice of tops • Choice of frame colours • Standard sizes 1220mm square *Vices not included

Record No.1 3inch jaw, opening to 3¼inch with replaceable serrated jaws. This vice is fitted to a catchment tray, for use in a woodwork vice.

1200mm2 heavy duty powder coated diagonal steel frame. • Cross stretcher design provides ample leg room for seated users and wheelchair access • Maximum 4 woodwork or metalwork vices fitted* • Choice of frame colours • Standard sizes 1220mm square *Vices not included

1200mm squared heavy duty powder coated diagonal steel frame. A maximum of 4 x woodwork or 4 x metal work vices can be fitted. • Beech well top. • Cross stretcher design provide ample leg room for seated users and wheelchair access. • Standard sizes 1220mm square and 860mm high.

The GABRO sheet metal folder features an adjustable top clamp to suit varying thicknesses and incorporates eight 2.00mm wide slots for folding box sections up to 13mm deep.

Hegner Blade Clamp 0.5mm and Screw Used for blades Grade no.5 or smaller

Hegner Blade Clamp 0.7mm and square head screw General purpose gap width of 0.7mm - will accept ALL our blades including Machine Coping Blades.

Has a larger gap width than our standard blade clamps. The larger gap makes installing blades grade no.9 or above easier and improves clamping force

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • Easy-to-use Control Panel • Programmable Origin • Rigid and Reliable Construction • Motion System with DC Servo Motor giving higher accuracy and excellent cutting output • Pass-through Front and Rear Doors • Superb Cutting Quality • Extensive driver functions such as smart centre, scaling, centre mode • Supplied with water chiller • SmartPIN Auto Focus • Possible to upgrade to AAS contour cutting feature WARRANTY INFORMATION 12 month warranty on the laser tube, 2 year warranty on the machine (longer than many similar low cost lasers) 12 month warranty on the water chiller

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • Easy-to-use Control Panel • Programmable Origin • Motion System with DC Servo Motor giving higher accuracy and excellent cutting output • SmartPIN Auto Focus • Emergency Stop • Extensive driver functions such as smart centre, scaling, centre mode • Supplied with water chiller unit WARRANTY INFORMATION 24 months machine warranty, 12 months laser tube warranty (longer than many similar low cost lasers) Additional 12 months warranty on the laser tube is available. Water chiller (12 month warranty)

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • Easy-to-use Control Panel • Programmable Origin • Motion System with DC Servo Motor giving higher accuracy and excellent cutting output • SmartPIN Auto Focus • Emergency Stop • Extensive driver functions such as smart centre, scaling, centre mode • Supplied with water chiller unit WARRANTY INFORMATION 24 months machine warranty, 12 months laser tube warranty (longer than many similar low cost lasers) Additional 12 months warranty on the laser tube is available. Water chiller (12 month warranty)

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • Easy-to-use Control Panel • Programmable Origin • Rigid and Reliable Construction • Motion System with DC Servo Motor giving higher accuracy and excellent cutting output • Pass-through Front and Rear Doors • Superb Cutting Quality • Extensive driver functions such as smart centre, scaling, centre mode • Supplied with water chiller • SmartPIN Auto Focus • Possible to upgrade to AAS contour cutting feature WARRANTY INFORMATION 12 month warranty on the laser tube, 2 year warranty on the machine (longer than many similar low cost lasers) 12 month warranty on the water chiller

Pack of 2 - Fine grade, composite fibre matrix delivers excellent particle capture capacity - up to 20 times more than a standard filter.

HEPA/Chemical filter for Alpha Purex-400.

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • Popular all round laser engraver with stable and satisfactory performance • Intuitive control panel allows easy operations • Low maintenance motion system • Emergency button and key-switch add an extra layer of safety WARRANTY INFORMATION 24 months machine and laser tube warranty. Additional 12 months warranty on machine and laser tube is available.

The AD Nano+ fume extraction and filtration system has been designed as a cost effective solution for light to medium duty applications and is the ideal choice for installations where floor space is limited. Suitable for light laser coding applications, the AD Nano+ incorporates many of the features found on our larger systems. The use of an Auto-Voltage Sensing Turbine means that the unit can be used anywhere in the world. Reverse Flow, Patented DeepPleat DUO and ACF filter technologies ensure optimised performance and filter life. • Standard Features • Auto sensing voltage (90-257v) for global use • Automatic flow control • Reverse flow • Easi-Seal filter location • Long life filters with low replacement cost • DeepPleat DUO pre filter • Advanced Carbon Filter technology • Small footprint • Low noise level

The R25 is an industrial quality plastic granulator. Suitable materials for recycling include PP, HIPS, ABS and LDPE. Materials to be granulated are loaded into the hopper at the top of the machine. A combination of static and rotating blades gradually chops the material into smaller and smaller pieces. Once the material reaches a small enough size it passes out through a mesh filter and into a collection bin. This model is the 3phase version. When not in use, a lockable cover can be fitted over the inlet chute, ensuring that no unwanted debris enters the machine. The Process: Wash out your old cartons Shred them in the R25 Schredder, reducing their volume by 95% and creating a usable material. At this stage, you can choose to put the waste for normal recycling, or to re-process it within school, in either of two ways: Use it directly in the CR Clarke 25 Injection Moulding Machine. (490-170) Heat it on a mould-plate and then roll it into a new sheet using the R30 Sheet Press (490-048).

Think big, print bigger With its bigger build volume, the Ultimaker S5 is designed for a reliable 3D printing experience at scale. For large, technical prints, Tough PLA material offers toughness similar to ABS with the simplicity of PLA. Optimized materials Ultimaker materials are extensively tested to give the best results on the Ultimaker S5. And Ultimaker Cura software comes with preconfigured profiles, so you don't need to spend time on complex slicing settings. Limitless possibilities 3D print everything from quick prototypes to complex, technical parts with Ultimaker's range of build and support materials. And with an open filament system, you can also choose a custom material solution.

The Ultimaker 2+ Connect builds upon the award-winning benchmark of its predecessor, to add intuitive operation and deeper software connectivity. • Build volume: 223 x 220 x 205 mm (8.7 x 8.6 x 8 inches) • Network connectivity via Wi-Fi or Ethernet enables remote printing over the cloud with added security • Easy control with the 2.4-inch colour touchscreen • Single extrusion

This range of strip heaters will handle most common thermoplastics. It operates using multiple low voltage hot wires. The heating wires produce an accurate and controllable line of heat to give sharp bends. The hinged top section incorporates cut-off switching to turn the heating wires off while loading and unloading.

The R25 is an industrial quality plastic granulator. Suitable materials for recycling include PP, HIPS, ABS and LDPE. Materials to be granulated are loaded into the hopper at the top of the machine. A combination of static and rotating blades gradually chops the material into smaller and smaller pieces. Once the material reaches a small enough size it passes out through a mesh filter and into a collection bin. The cutting blades are powered by a three phase motor fitted with a phase inverter, allowing operation from a normal 230V electrical supply. When not in use, a lockable cover can be fitted over the inlet chute, ensuring that no unwanted debris enters the machine. The Process: Wash out your old cartons Shred them in the R25 Schredder, reducing their volume by 95% and creating a usable material. At this stage, you can choose to put the waste for normal recycling, or to re-process it within school, in either of two ways: Use it directly in the CR Clarke 25 Injection Moulding Machine. (490-170) Heat it on a mould-plate and then roll it into a new sheet using the R30 Sheet Press (490-048).

The R30 Sheet Press converts granulated thermoplastic material into a usable form using heat and pressure. As standard, the formed article is a flat plastic sheet, which can typically be used for vacuum forming, laser cutting, line bending etc. There are also tools available for making shaped parts, for example Frisbees, on the machine. A removable material cassette is loaded with granules of the material to be pressed. For best results the granules are sprinkled uniformly over the base of the cassette. The cassette is then loaded into the R30 sheet press, and clamped firmly between two temperature controlled aluminium hotplates. The heat and pressure causes the material granules to soften and fuse. At the end of the pressing cycle, the material cassette is unloaded and allowed to cool. The formed sheet of material can then be removed and used. As standard the R30 produces a sheet 457 x 305mm (compatible with the 725FLB vacuum former).

• Auto sensing voltage (90-257v) for global use • Closed loop automatic fl ow control • DeepPleat DUO pre fi lter • Reverse fl ow • Easi-Seal filter location • Small footprint and low noise levels • Enhanced fi lter system • Auto cut off • Filter full indicators • Mobile with heavy duty castors IQ System The BOFA Oracle extractor is now available with the new revolutionary IQ operating system. Users benefi t from the ease of operation and clarity of real time information, the system also provides a cache of analytical data enabling users to download performance and operating parameters for evaluation purposes. • High Quality, High Contrast LCD Display • Clear and Simple Real Time Features • Airfl ow Reading and Set Point • Real Time Airfl ow Reading in CFM or M3/hr • Filter Condition Monitoring with Alarm and Warning • Temperature Monitoring • Run Hours • Extraction Running Indicator • Hose Blocked Warning • Unit Failure and Door Open Alarm

High-performance fume extractor with ihgher capacity for larger laser cutters. The AD1000 packs a powerful range of unique features into one compact unit. • iQ operating system which provides real time filter monitoring, airflow reading, temperature monitoring, running time and block hose warnings • Closed loop automatic flow control • DeepPleat DUO pre filter • Reverse flow • Easi-Seal filter location • Small footprint and low noise levels • Enhanced filter system • Auto ct off • Mobile with heavy duty castors • Onboard compressor • interface with our laser cutters for automatic start and stop

All of our laser packages are supplied complete with everything required for a complete educational solution including recirculatory extraction unit, connection kit, design software. We also provide flexible training solutions with onsite installation and training or additional training sessions should you require a 'top-up.' • QSM (Quality Speed Mode) maintains 100% engraving quality while operating at maximum speed • Patented SmartACTTM motion control technology increases your productivity by reducing ramping process and job running time • Drag and engrave feature assures remarkably easy and fast set-ups • High speed DC motor runs up to 80ips for precise and rapid movement of the laser carriage • Reliable DuraGuide motion system with reinforced Kevlar belt delivers superb output quality • This machine is fi tted with the Smart Guard Fire Alarm and auto-cut out on extraction failure as standard WARRANTY INFORMATION 3 year machine warranty, 15 month tube warranty

Guard for HSM300 Disc Sander

Weight 13kg Height 880mm - effective table working height for Multicut-1 1040mm, Multicut-2S/SEV 1080mm. Suitable for: Multicut-1, Multicut-2S, Multicut-SE, Multicut-QUICK. Not suitable for the Hegner Polycut-3 and Multicut-2 scrollsaws Bolts used to fix multicut to stand are incuded with the machine and also with the stand. They are 3 x M8x16mm hex head & M8 sprung washer. Height 880mm - effective table working height for Multicut 1 1040mm, Multicut 2S 1080mm. Top size (triangular 450 x 445 x 445 mm)

The standard equipment for the DS 430S has the same specifications as the DS 430 on page 133, except for the Brazing Equipment which is listed below right. BRAZING STANDARD EQUIPMENT • 1 asbestos-free heat resistant refractory hearth • 2 full size heat reflective blocks • 4 half size heat reflective blocks • Push button no volt release starter (requires manual restart after power failure) • 1 RF 80 brazing torch