Tools

Forged from chrome alloy steel, jaws fully hardened and tempered polished and chrome plated.

GABRO guillotine notchers are suitable for bench and stand mounting. They completely eliminate the distortion of material associated with conventional guillotines. They do this by progressively blanking out a thin strip of material, leaving both sections entirely undistorted and free from sharp burrs and edges. Sheets of unlimited size can be cut and notched up to the maximum thickness rating for each machine. All machines are supplied with an angle guide/ backstop, line guide, side fence and nibbling steady. NOTE: Stand not included.

Chrome Vanadium. Both ends fit the same size nut, one is openended, the other ring. QGT.* Sizes - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17 & 19mm.

Includes 2 spark plug sockets, reversible ratchet, speed brace, sliding T-bar, universal joint, 2 extension bars: 125mm and 250mm; 2 adaptors 1/2"" (female) x 3/8"" (female) x 1.4"" (male); 17 metric sockets 10-27mm, 15 AF sockets 3/8"", 7/16"", 15/32"", 1/2"", 9/16"", 19/32"", 5/8"", 11/16"", 3/4"", 25/32"", 13/16"", 7/8"", 15/16"", 1"" and 1 1/8"".

Spring dividers have polished natural steel finish legs made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action. The polished natural steel finish legs are made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw, which gives a smooth and precise action Spring divider 100mm (4in)

Footprint, Gilbow and QGT* snips are designed to prevent the handle ends from nipping the user.

Footprint, Gilbow and QGT* snips are designed to prevent the handle ends from nipping the user.

Machinists scribers made from hardened and ground HSS. Single ended 4.1/2 long, double ended 7.1/2 long.

DRAPER 3x100mm Centre Punch -Tip Diameter: 3mm -Square Section Striking Head -Knurled Body with Polished Ends -Manufactured From Hardened and Tempered Carbon Steel

Priory 44 Square head knurled body 4inch, 5mm tip.

This is our best seller and offers outstanding value. They are graduated on two edges in mm and figured every 10mm.

Aluminium safety rule, recessed down the centre of the rule so that fingers are protected when used for cutting work. The rule has a foam backing making it non-slip for precision work.

300mm Stainless steel rule. Figured every inch / cm.

A great value 3m tape measure. Ideal for education purposes. Clear metric and imperial graduations. Includes belt clip and hand strap. Specification: • Brand: Silverline • Accuracy: EC Class 2 / Class II • Length: 3m • Metric Measurements: Yes • Imperial Measurements: Yes • Blade Diameter: 16mm • Blade Material: Steel • Case Material: ABS Plastic

300mm, satin finish with black markings. The back of this rule has a useful conversion table.

Etched graduations marked in mm.

These planes have fine cast iron bodies. The Record & Stanley have impact resistant plastic handles while the QGT has solid wood. The Record SP4 and SP5 have a painted rather than chrome lever cap and offer excellent value for money.

Both planes have fine cast iron bodies. The Stanley plane has an impact resistant plastic handle.

Both planes have fine cast iron bodies. The Stanley plane has an impact resistant plastic handle.

Replacement Stanley Surform Blades 250mm

Fully adjustable hgh carbon steel with wood handle & guide knob. Supplied with spare iron.

The original Surform with solid moulded plastic handles and painted die cast bodies. They are supplied with a blade.

Stanley powerlock tapes have chrome plated diecast cases. Yellow blades with black markings, abrasion resistant coating and power return.

A deep bow fixed frame saw that accommodates standard blades.

Made from flexible carbon steel these blades are available with differing teeth per inch and can be used for cutting wood or metal. They are 6inch long x 1/4inch wide. Packs of 10.

Screwdriver set, which includes flared tipped and tapered tipped screwdrivers. Manufactured from chrome vanadium steel, hardened and tempered for strength and chrome plated for corrosion protection. Each screwdriver is fitted to an ergonomic soft-grip handle, providing extra comfort, beneficial when used for prolonged periods. Contains: • 4 plain slot size: 4 x 75, 5 x 100 and 6 x 150mm • 2 PZ TYPE: No.1 and 2 x 100mm • Cross Slot No. 2 x 38mm

7 piece set containing: Parallel 3.0mm x 100mm, 3.5mm x 75mm Flared 8.0mm x 150mm, 5.5mm x 100mm Pozidriv PZ.0 x 75mm, PZ.1 x 100mm, PZ.2 x 125mm

Direct reading. Steel, with double scale 0-120mm x 0.1mm & 0-5in. X 1/128in. For internal, external and depth measurements. With fine adjustment thumb wheel.

Manufactured from chrome vanadium steel, hardened and tempered for strength and chrome plated for corrosion protection. Each screwdriver is fitted to an ergonomic soft-grip handle, providing extra comfort, beneficial when used for prolonged periods.

Hardpoint saws have a moulded plastic handle and ground teeth. They retain a keen cutting edge even when cutting man made boards.

Diecast handle and oval tubular frame. Wing nut tensioning device for 10-12inch blades. S & J 20T.

Junior Steel epoxy coated frame supplied with an Eclipse metal cutting blade. Throat depth: 67 mm Blade material: Bi-metal Overall length: 260 mm Saw tooth size: 32tpi For use with: Wood, metal and plastic

Lacquered wooden handle, 4½inch throat.

Lacquered wooden handle, 4½inch throat.

The GABRO sheet metal folder features an adjustable top clamp to suit varying thicknesses and incorporates eight 2.00mm wide slots for folding box sections up to 13mm deep.

A choice of bar type or precision adjustment hardened sliding jaw type.

The use of Trefolex will increase the life of taps and dies. It will also improve the quality of threads and reduce the effort required to cut them.

Circular die stock for 13/16inch O.D dies.

Mitre block 9inch long beech construction with accurate slots. RST.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

As a box pan folder, a unique feature of this model for forming box ends is the use of standard steel angle cut as required for work clamping rather than conventional segments. A narrow bed assures that return bends are made with the workpiece suspended insude the folder. • Interrupted folds • Return bends • Box ends • Brackets and channels • Scrolls and cylindrical shapes

Floor stand for Gabro BF620.

13/16inch O.D.

13/16inch O.D.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

13/16inch O.D.

All beech manufactur, glued with dowells. Size 8'' x 4''. For use either right or left handed.

For high precision cutting of medium and heavy duty materials.

Ideal for use with wood chisels. Size: 115mm