The Powerbase V8 comes with a high-power rotary transformer and a high specification toroid transformer. The unit supplies 0-20 V smoothed DC and 0-16 V AC at 8 A. The output is continuously variable and protected by a panel mounted thermal cut out. An output limiter is fitted which allows the user to preset the maximum voltage available. •A heavy-duty power supply for powering laboratory experiments •Heavy duty variable transformer and high-power toroid transformer •Continuously variable output of 0 to 16 V AC and 0 to 20 V DC, capacitor smoothed •Output current 8 A. Output voltages are rated at 8 A load so higher voltages are available at less output current. •Manufactured in the UK with 5 years warranty •AC and DC outputs may be used simultaneously up to rated current. •Colour coded 4 mm sockets. •Maximum voltage limiter operated by Allen key •Push button cut-out to protect against overload and short circuit conditions •Mains Input 230 V, 50 Hz •Fusing: 5 A mains plug fuse
This repair kit for Irwin power supplies allows damaged plastic cases to be replaced quite easily. The kit comprises brand new plastic case in original Irwin blue, gloss black or crystal clear, three ""mushrooms"", which fit on the back of the case and act as cable tidy, new cable clamp and complete fitting instructions. In case of difficulties removing the old cable clamp and cable, specially designed tool to make the job easier is also available.
The Powerbase S5 is a great value power supply that provides a range of AC and DC voltages at 5A. Smoothing is achieved by a 4700uF capacitor. The supply has safe lockable DC and AC outputs ensuring the unit does not exceed the voltage required for experiments carried out by students. • AC & DC Output Voltages DC 3, 7, 10, 13, 17, 20 V - AC 3, 6, 8, 11, 13, 15 V • Current 5A • Supplied with and Allen key to lock minimum or maximum output • Voltage selector type - Stepped • Output type - Smooth non-regulated • Push button trip reset • Mains input 230/240V AC, 50Hz • Supplied with fused mains plug, lead and Allen key • Manufactured in the UK
The Powerbase S10 2-12 V AC/DC switched 5 A power supply unit is ideal for powering electrical experiments using the output voltages ranging from 2, 4, 6, 8, 10, 12 V AC and DC. Safe lockable DC and AC output this ensuring the unit does not exceed the voltage required for experiments carried out by students. • AC & DC Output: 2, 4, 6, 8, 10,12 voltage range in AC and DC • Current 5A • Supplied with Allen key to lock minimum or maximum output • Voltage selector type - Stepped • Output type - Full wave rectified, non-regulated • Push button trip reset • Mains input 230/240 V AC, 50 Hz • Supplied with mains plug and lead + Allen key • Manufactured in the UK
This Power Supply is suitable for wide variety of appliances which are powered by USB. UK mains plug with standard USB-A socket on top. V 2.1 DC output. • 5 V DC 2.1 (10.5 W) • RoHS compliant • CE marked
Car foot pump with 120 mm barrel and 450 mm hose with nylon connector and football inflator adapter. Complete with integral pressure gauge marked 0-100 p.s.i. and 0-7 kg/cm2 (7 bar).
The pump can be used to demonstrate the following: • Principle of siphon • Filtering using suction • Investigation of leaks in piping • Indirect transfer of liquid by means of negative pressure Please note this pump is not suitable for ""Bell in Jar"" experiments.
Rotary vane high vacuum pump, oil sealed and ideally suited for use in education. This unit is relatively quiet in use, can be operated for long periods of time, is robust, and is engineered for school use. The large oil capacity of 350 mL provides for long operation between oil changes. An oil level sight glass is incorporated so that the oil can be monitored. •Model: Javac CC-31ED •Air displacement: 40 L/minute •Ultimate vacuum: 25 micron 8 mm rubber hose fitting •Dimensions (L x W x H): 330 x 135 x 255 mm •Weight: 9.8 kg
Diaphragm pump suitable for vacuum or pressure work. Housed in a splashproof polycarbonate case. Please note this pump is not suitable for ""Bell in Jar"" experiments. 5 L/min flow rate 0.7 bar pressure 4 mm inlet/outlet Conforms to IEC1010
This robust Chemical Filtration Pump with PTFE diaphragm is a durable chemical resistant vacuum pump which is suitable for the following applications: vacuum filtration; desiccation; aspiration; degassing; other mid-range vacuum applications. It is ideal for both single funnel use and up to 6 holder manifold filtrations and suitable for organic and light acid/base (e.g. acetic acid solutions. The pump can also be used to pressurize up to 18 PSIG. Free air flow 31 l/min; Maximum vacuum 200 mbar. Please note this pump is not suitable for ""Bell in Jar"" experiments. Applications: • Filtration • Vacuum drying • Desiccators • Concentration • Suitable for basic and acid media Design Features: • PTFE wetted parts • Low noise emission • Direct drive • Continuous operation • No oil contamination • Low maintenance even in aggressive applications
Designed for general lab applications requiring only rough vacuum and moderate pressure. The pump is housed in tough, lightweight, plastic housing with an integral carrying handle and can be run continuously permitting use in applications such as filtering, drying, aerating and gas sampling. Easy to connect to apparatus via the hose connection on the side of the unit. Not recommended for organic, basic and acidic vapours. Vacuum to 292 mbar (219 Torr/21.3 in. Hg) and pressure to 2.3 bar (33 PSIG). Quiet, oil-free technology. Please note this pump is not suitable for ""Bell in Jar"" experiments.
Designed with microprocessor-controlled dual thermocouples, this stirring hot plate offers accurate temperature control and protection from overheating. The analogue models feature a coloured LED indicator which surrounds the heat control knob illuminating the actual surface temperature in real time. Powerful magnets and motor provide stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. This model includes an integral fitting for a retort rod and allows the retort base to slide underneath. Featuring a chemically resistant glass ceramic top plate that stays cool around the edges to help prevent burns. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.
Designed with microprocessor-controlled dual thermocouples, this stirring hot plate offers accurate temperature control and protection from overheating. The analogue models feature a coloured LED indicator which surrounds the heat control knob illuminating the actual surface temperature in real time. Powerful magnets and motor provide stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. This model includes an integral fitting for a retort rod and allows the retort base to slide underneath. Featuring a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.
A cost effective hotplate/stirrer, the 'MS-Series has the following features and specification: • Case construction: Steel, with chemical resistant coating • Stage area: 180 x 180 mm • Temperature: Up to 400 °C (max) • Speed range: 100 - 1500 rpm • Power Supply: 220 AC
Designed with microprocessor-controlled dual thermocouples, this stirring hot plate offers you accurate temperature control and protection from over-heating. Actual surface temperature is displayed in real time on an easy-to-read digital screen. Powerful magnets and motor provide stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The units also include BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Includes an integral fitting for a retort rod and allows the retort base to slide underneath. Features a coated aluminium top plate for rapid heating and better temperature uniformity. Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.
The SM5 mini stirrer is a powerful magnetic stirrer, capable of stirring up to 1 litre with an adjustable stirring speed up to 2,000 rpm. The unit is made from robust polypropylene with chemically resistant polycarbonate top. Features: • Lightweight stirrer • Capable of stirring up to 1 litre • Universal power adaptor • With BioCote antimicrobial protection • Dimensions (L x W x H): 143 x 143 x 64 mm
Constructed with powerful magnets and motor, this compact stirrer provides you with stirring speeds of up to 2000 rpm and mixing capability of up to 15 L of liquid. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250 mL beakers can easily fit on the surface at the same time. For safety, this unit is designed to direct spills away from the user controls. The stirrer also features BioCote® antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment. Features a chemically resistant glass ceramic plate.
Constructed from chemically resistant ceramic coated steel, the MS-200 analogue magnetic stirrer delivers excellent reliability with reproducible results at a sensible price. A screwed 12.5 mm screwed thread is included for the addition of a retort rod (not included).
The HI-190M-0 is a compact and lightweight mini magnetic stirrer with plastic cover and can stir up to 1 litre. The compact size of this stirrer allows users to maximise bench space for efficiency and safety The internal Speedsafe™ mechanism ensures that the maximum speed of 1,000 rpm is never exceeded. The ABS housing will resist the most harmful chemicals in the classroom. Supplied with; •ABS cover •Micro stir bar •Instructions
An extremely good value compact magnetic stirrer, ideal for student use. The base is white to allow unaffected observation during experiments with colour indicators. The unit has adjustable feet to ensure stability on the bench. The speed is adjustable, and is controlled by the intuitive rotary knob on the front, which also controls power. Supplied with SELV (Safety Extra Low Voltage) AC adaptor, and magnetic stirrer bar.
An extremely good value compact magnetic stirrer, ideal for student use. The base is white to allow unaffected observation during experiments with colour indicators. The unit has adjustable feet to ensure stability on the bench. The speed is adjustable, and is controlled by the intuitive rotary knob on the front, which also controls power. Supplied with SELV (Safety Extra Low Voltage) AC adaptor, and magnetic stirrer bar.
This timer is most suited for an investigational approach for students to gain sound understanding of the concepts of time and motion. Two pairs of sockets alternately start and stop the timer, one pair operating in make mode, the other in break mode. The start/stop switches can be either mechanical or electronic. The timer is auto-ranging for ease of use and has clear 13mm digital display and has robust metal case with durable powder coat finish. An illuminated on/off switch is mounted on the rear panel adjacent to fused appliance inlet. • Electrical Supply: 220-240 V AC 50-60 Hz • Dimensions (W x L x H): 179 x190 x 85 mm • Mass: 1.6 kg • Ranges: 0 to 9.999s; 10 to 99.99s; 100 to 999.9s; 1000 to 9999s • Accuracy: ±0.01%
For use as a light operated timing gate. Comprises a photodetector and light source each housed in a robust ABS case spaced 40 mm apart on a plastic rod. Light source housing has a battery compartment and on/off switch. Photodetector housing is fitted with pair of 4 mm sockets to allow connection to electronic timers. When the timing gate is switched on it creates a short circuit between the two output sockets, this then becomes an open circuit each time the light beam is interrupted. Consequently the timing gate can be used as a remote switching device in wide range of dynamics experiments.
A compact all glass still, which can be wall or bench mounted. Produces up to 4 litres per hour of single distilled water. Consisting of horizontal boiler with 3 kW heating element and double coil condenser which cools the distillate to around 30 °C. The boiler can be drained via a stopclock and cleaned without dismantling. Two independent, automatic safety thermostats are fitted to prevent overheating. Supplied with level control device which turns the heater off when the reservoir is full. Requires minimum flow of1 l/minute. Dimensions 540 x 160 x 410 mm (W x D x H)
An economically priced, wall mountable, all-glass water still, producing 4 litres per hour single distillate. With two independent safety thermostats, condenser, boiler, 3 kW sheathed heater and screw thread connections. Includes acid addition port and drain cock system for descaling the boiler. Dimensions 500 x 150 x 450 mm(W x D x H).
This water still produces ready-to-use cold, distilled water. The high quality borosilicate glassware coupled with silica sheathed heaters gives pyrogen-free distillate of the highest purity from virtually any raw water supply. The boiler feed is pre-heated to increase efficiency. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time ensuring maximum energy transfer. All-glass construction allows rapid descaling using strong mineral acids. built- in ""clean"" function and integral acid addition funnel make the cleaning operation simple and safe with no need to dismantle any of the glassware. large bore stopcock with PTFE key is fitted for easy draining of chemicals after cleaning. A flow sensing device prevents overheating, and allows the unit to run on water supplies with pressure as low as psi (20 kPa). Requires a minimum flow of 1 litre per minute. There is an over-temperature thermostat mounted in the boiling chamber as an additional fail-safe. The acrylic safety screen and the cabinet lid are removable giving easy access to the glassware components. Screw threads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The control is simple and effective system which can be fitted to virtually any type of reservoir vessel. It will turn the still off when the reservoir is full, and restart it when the level in the reservoir drops, making it fully automatic. • 4 litres per hour output • Highly efficient • Fully automatic • Built-in ""clean"" function • Wall mounting bracket included
This battery has a 7 year shelf life and are suitable for high drain rate applications (although lithium cells may work better in some applications). It also has better low temperature performance than Zinc cells.
This battery has a 7 year shelf life and are suitable for high drain rate applications (although lithium cells may work better in some applications). It also has better low temperature performance than Zinc cells.
These batteries have 7 year shelf life and are suitable for high drain rate applications (although lithium cells may work better in some applications). They also have better low temperature performance than Zinc cells.
These batteries have 7 year shelf life and are suitable for high drain rate applications (although lithium cells may work better in some applications). They also have better low temperature performance than Zinc cells.
These batteries have 7 year shelf life and are suitable for high drain rate applications (although lithium cells may work better in some applications). They also have better low temperature performance than Zinc cells.
These batteries have 7 year shelf life and are suitable for high drain rate applications (although lithium cells may work better in some applications). They also have better low temperature performance than Zinc cells.