A triple water bath featuring three independently controlled unstirred water baths in one unit.
Featuring three 4 litre stainless-steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and water level. Each easy-to-use digital control, with up and down key pads, allows temperature setting and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance.
For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C.
*Lid available BA220100
A triple water bath featuring three independently controlled unstirred water baths in one unit.
Featuring three 2 litre stainless-steel tanks with individual thermostatic digital controls, allowing each chamber to have a different temperature and water level. Each easy-to-use digital control, with up and down key pads, allows temperature setting and each tank has an illuminated on/off switch and heater indication lamp. Each chamber comes complete with removable low height perforated stainless steel shelf. The tanks are made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance.
For temperatures above 60°C a lid is recommended. Temperature range: Ambient +5°C to 99°C.
*Lid available BA220100
This shallow form Clifton water bath is perfect for heating small height samples such as micro tubes, micro plates and bottles. The bath comes complete with a removable, ‘low’ height stainless-steel perforated shelf. The tank is made from high quality, corrosion resistant stainless-steel with a bright clean finish, housed in a durable paint finished outer case. The painted surfaces feature anti-bacterial finish, hygienic coating which actively inhibits bacterial growth, with good chemical resistance. For temperatures above 60°C a lid is recommended (not included). Temperature range: Ambient +5°C to 99°C.
The Irwin water bath specifically designed for school science departments. It is built around a Gratnells deep tray and so can be stored in a Gratnells trolley. Water capacity is from 2 to 8 litres. Because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a Clifton Bath, thus it reaches temperature much faster.
Digital temperature control will maintain the water temperature within 1°C. Separate temperature sensor which can control the whole bath or an individual test tube 500 W silicone heating element. Particularly suitable for hard water areas as the element may be easily removed and cleaned. Gives additional bench space in the prep room. Light and easy to carry with safety cut-out sensor.
Even temperature distribution no stirrer required. Student proof temperature lock. Large capacity will take up to 4 test tube racks. Cost effective and practical solution for all your water bath needs. Comes complete with a lid and Z type test tube rack.
The Irwin water bath specifically designed for school science departments. It is built around a Gratnells deep tray and so can be stored in a Gratnells trolley. Water capacity is from 2 to 8 litres. Because of the shallow profile of the heating element, 3 litres of water gives the equivalent depth to 8 litres in a Clifton Bath, thus it reaches temperature much faster.
Digital temperature control will maintain the water temperature within 1°C. Separate temperature sensor which can control the whole bath or an individual test tube 500 W silicone heating element. Particularly suitable for hard water areas as the element may be easily removed and cleaned. Gives additional bench space in the prep room. Light and easy to carry with safety cut-out sensor.
Even temperature distribution no stirrer required. Student proof temperature lock. Large capacity will take up to 4 test tube racks. Cost effective and practical solution for all your water bath needs. Comes complete with a lid and Z type test tube rack.
This innovative device is a compact dry block heater which can be used as a small scale substitute for the traditional water bath, offering several advantages:
• Waterless safe and portable
• Six test tubes warmed or cooled between 15 °C and 65 °C
• Accepts 16 mm diameter test tubes
• Digital display for set point and actual temperature
• Safe to use, operates at low voltage
• Power supply: 12 V AC/DC adaptor
• Dimensions: (L x W x D) 175 x 110 x 105 mm
The Targa Centrifuge (model NE 010G) from Clifton spins at up to 4000 rpm, with an acceleration/deceleration time of approx. 20 seconds. Complete with lid lock safety and lid drop protection. The motor is fitted with a safety cut out device. The lid automatically releases on completion of spinning down samples and includes a visual/audible end alarm. The rotor can only be energised when the lid is correctly closed and locked. A viewing window in the lid enables the rotor motion to be observed. Fitted with non-slip rubber feet for safety. Built to the latest safety standards and supplied with comprehensive operating instructions.
•Noise Level: <52 dB
•Dimensions (W x D x H): 296 x 412 x 206 mm
•3-year warranty
A competitively priced centrifuge to suit education budgets but designed to be used in medical and university research laboratories. With speed range of 300-4500 rpm and maximum rotor capability of x 15 ml tubes the clinical centrifuge allows precise control of time and speed ensuring an efficient separation process. The stable design and noise level of less than 56 dB allows the centrifuge to work without becoming disturbance. The centrifuge's CPU controls all operating parameters including speed and time settings. Operation of the centrifuge can be timed from 30 seconds to 99 minutes or can be run in continuous mode. Timing will only commence when the set speed is reached ensuring that the separation time is highly accurate. The centrifuge breaks gently to preserve separation and not damage samples. The large, user-friendly LCD screen displays all information including RPM and Force. Parameters of the centrifuge can be set and modified after the set speed is reached. quick spin mode is also available which is activated by pressing and holding the 'PULSE' button. The centrifuge can be accelerated to the required speed and held for as long as the button is held down and also has an automatic lid release. When the process is finished this saves time and protects samples from heat build-up.
•Max. Speed [rpm]: 300-4500, increment: 100
•Speed Accuracy [rpm]: ±20
•Rotor Capacity: 12 x 10 ml/7 ml/5 ml; 8 x 15 ml
•Run Time: 30 sec - 99 min-HOLD (Continuous operation)
•Driving Motor: Brushless DC motor
•Safety Devices: Autolock lid when centrifuge is spinning
•Detailed instruction manual included
A very economical centrifuge that clamps directly to any bench top. It features a table clamp, hand crank and 4 buckets holding tubes up to 15 mL in capacity.
The OHAUS Frontier 5306 is small but powerful mini centrifuge for simple and quick liquid separation. With an 8-place 1.5 mL or 2 mL tube rotor as well as 4 place PCR 8-strip tube rotor, the Frontier™ 5306 can accommodate 0.2 mL strip tubes or 32 individual PCR tubes. With the included adapter, 0.2 mL and 0.5 mL tubes can also be accommodated in the place tube rotor. This centrifuge provides quiet, safe, and easy operation for your everyday quick spin-down applications.
With low voltage power input, quiet brushless motor and rubber base that absorbs vibrations, the Frontier 5306 minimizes operational noise and reduces disruptions in the classroom.
It is designed with operator safety in mind, and includes rotor imbalance sensor and two safety switches which immediately stop the rotors should the lid open during use.
It is also very easy to use simply place your sample in the centrifuge, close the lid, and it will begin to rotate without the press of button.
• Speed: - 6,000 rpm
• Max. relative centrifuge force: 2,000 g
• Max. capacity: x 1.5 mL/2 mL tubes
The Piccolo™ microcentrifuge is easy to use (and clean), economical, and is suitable for most teaching applications, including quick spin-downs, micro-filter separations and cell pelleting. It takes only a small footprint and offers quiet operation. The palm shaped lid, suitable for left or right-handed users, allows quick extraction of tubes and the weighted rubberised base eliminates potential movement and further dampens vibration and noise
•Ideal for microcentrifuge tubes
•Maximum speed 6,000 rpm
•Maximum RFC: 2,000 x g
•Included is an 8-place rotor for 1.5 or 2.0 mL tubes
•Dimensions: 153 x 128 x 104 mm
The Biochrom WPA CO7500 colorimeter is a value for money instrument that has been designed for use in educational establishments such as schools and colleges. It is compact, lightweight, and ergonomically designed to withstand student use! This makes it ideal for use in busy teaching laboratories. The large display is easy to read, and the instrument is simple to both set up and use, giving rapid results. The samples can be measured in either standard or semi micro 10mm pathlength cuvettes or in 16mm diameter test tubes.
This colorimeter is designed to make life easier for technical staff, and to be low maintenance under demanding conditions. The eight filters (440, 470, 490, 520, 550, 580, 600 and 680nm) are encased in an integral filter wheel so filters cannot be accidentally lost or damaged. With no lid needed, this robust instrument is easy to use, clean and store. There is a drain hole at the bottom of the cell compartment so that spillages do not affect the instrument. Lamp life is extended as it is only on during the measurement cycle. Spare lamps are available and easy to install.
This versatile machine measures absorbance, % transmission and simple kinetics. When used in kinetics mode - to study rates of reaction, for example, it takes readings approximately every second and these can be sent to a chart recorder (via the analogue output) if required. Alternatively, the results could be downloaded to an Excel spreadsheet for graphing and other manipulation.
•Single beam filter based colorimeter covering 440-680nm
•Rugged, portable and easy to use
•Excellent value for money and ideal for educational applications
•Absorbance, % transmission and simple kinetic measurements
Facilitates the handling and preparation of cuvettes. Holds 20 cuvettes in numbered positions. Manufactured from polypropylene to withstand sterilisation.
Disposable standard plastic cuvettes, for transmittance through the visible range spectrum (340 to 800nm). Made from Optical Polystyrene (OPS). Path length: 10 mm; Capacity: 4.5 mL.
Disposable standard plastic cuvettes for transmittance through the visible and UV range spectra (280 to 800nm). Made from PMMA. Path length: 10 mm; Capacity: 4.5 mL.
The Mystrica colorimeter delivers high quality performance in a small, robust, user-friendly and affordable package. It has 3 LED light sources emitting red (630nm), green (525nm) or blue (465nm) which are easily selected using the RGB button. You can choose to measure either absorbance or transmittance with the simple press of a button. Absorbance readings are shown from .000 to 1.999 and transmittance is shown from 100.0 to 0.1%. The power switches off after 2 minutes to conserve battery life, unless it is connected to a PC, tablet or phone. This colorimeter allows the use of 12 mm test tubes as well as standard 4.5 mL cuvettes, creating a more versatile unit.
Features:
• Wireless connection to iPads, iPhones and Android™ devices
• Mystrica Colorimeter app available on the App Store and Google Play™
• Each colorimeter has unique identity. The app detects all units within range of an iPad or iPhone and allows one to be selected
• Collect data as graphs and tables
• Continuous data collection or separate readings
• Best fit line for rate of reaction
• Email results as .csv file for analysis and storage
• Fully supported suggestions for practical activities.
• Power: 4 x AA batteries (not included) or via USB when connected to computer
Price includes 10 plastic cuvettes with caps, a cuvette stand, instructions, USB link and software.
The Medline 50 mL controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings.
• Case construction: Steel, with chemical resistant coating
• Thermal Insulation: Moulded silica powder
• Heating Element: Nichrome wire
• Mantle: Woven glass fibre mat
• Element Temperature: Up to 450°C (Max)
• Power Supply: 230V AC.
The Medline 100ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings.
• Case construction: Steel, with chemical resistant coating
• Thermal Insulation: Moulded silica powder
• Heating Element: Nichrome wire
• Mantle: Woven glass fibre mat
• Element Temperature: Up to 450°C (Max)
• Power Supply: 230V AC.
The Medline 250ml controlled heating mantle is an energy-regulated, all-purpose heating mantle. The time proportional double pole system allows stable control of the heating element, reducing risk of overheating liquids, whilst the dial controller allows accurate temperature settings.
• Case construction: Steel, with chemical resistant coating
• Thermal Insulation: Moulded silica powder
• Heating Element: Nichrome wire
• Mantle: Woven glass fibre mat
• Element Temperature: Up to 450°C (Max)
• Power Supply: 230V AC.
Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support.
Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.
Quickly and safely heat round-bottom flasks to 450°C (842°F). This simple-to-use heating mantle features a built-in power controller with dial markings from 1 to 10 for repeatability. An amber-coloured ""heater on"" light and a clear-coloured ""power on"" light indicate when the heating mantle is in use. The replaceable coiled heating element suspended within a thermal insulating cartridge provides maximum heat transfer and support.
Unique ventilation slots and ceramic fibre insulation keep the chemical-resistant polypropylene exterior cool even while in use. A safety earth (ground) screen and double fuses provide added safety.
An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing.
• Electronic temperature regulation
• Variable temperature control
• Inner vessel thermally isolated
• Chromium-nickel heating elements
• Power off/on and heating-up lamps
• Includes fixing for retort rod
An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing.
• Electronic temperature regulation
• Variable temperature control
• Inner vessel thermally isolated
• Chromium-nickel heating elements
• Power off/on and heating-up lamps
• Includes fixing for retort rod
An economy heating mantle suitable for distillation, evaporation, extraction and boiling experiments using round bottom flasks. The unit has electronic temperature regulation, outer casing manufactured from furnace-painted steel and comes complete with retort rod fixing.
• Electronic temperature regulation
• Variable temperature control
• Inner vessel thermally isolated
• Chromium-nickel heating elements
• Power off/on and heating-up lamps
• Includes fixing for retort rod
Reaction heater block for round bottom flasks (one flask capacity), suitable for use with the hotplate stirrer ST150100. Made from solid aluminium, this block, when used with suitable hotplate, offer useful alternative to a heating mantle, making the hotplate/stirrer even more versatile. 100 mL flask size.
Compact, portable, solid plate design which is sealed against spillages with a durable easy to clean polished steel finish. Variable heat control from simmer to boil.
•Cast iron hotplate
•Variable heat settings
•Overheat protection
•Corrosion resistant
•Power indicator
•Easy clean finish
•Non-slip rubber feet
•Hotplate diameter: 185 mm
•Power: 1500 W
This robust hotplate and magnetic stirrer is made of stainless steel with a ceramic to coating resist corrosion. It also has a separated safety circuit which will automatically stop heating when temperature reaches 350 degrees. The variable speed motor is designed to stay at a constant speed even during change in load. High magnetic adhesion ensures that the stirrer bar stays stable at the bottom of the container. It features an enclosed assembly with protection class IP42 and a DC brushless motor which guarantees long product life. A block heater, ST150115 is available as an accessory.
Designed with a microprocessor-controlled dual thermocouple, this hot plate offers accurate temperature control and protection from overheating. A coloured LED indicator surrounds the heat control knob illuminating the actual surface temperature in real time. The square plate design allows flexibility of vessel sizes and combinations. Up to four 250-mL beakers can easily fit on the surface at the same time.
To keep you safe, a “hot” warning light flashes whenever the plate surface temperature is above 50°C and continues to flash until the temperature drops below 50°C, even when unplugged. The unit also includes BioCote antimicrobial protection which reduces the presence of odour and stain causing microbes such as bacteria, mould, and fungi on the product surface by up to 99.99%. Formulated from silver ion additives, BioCote provides built-in antimicrobial protection to support a more hygienic laboratory environment.
Includes an integral fitting for a retort rod and allows the retort base to slide underneath. This unit has a coated aluminium top plate for rapid heating and better temperature uniformity.
Please Note: BioCote® technology does not protect users or others against disease causing bacteria, germs, viruses, or other harmful organisms. This technology is not a substitute for good hygiene and/or cleaning practices.
This analogue hotplate offers a large heating area of 180 x 180 mm with safe controlled heating up to 400°C. Constructed from chemically resistant ceramic coated steel, this hotplate delivers excellent reliability with reproducible results at a sensible price. A screwed 12.5 mm screwed thread is included for the addition of a retort rod (not included).
2.2 kW fast boiling jug kettle, with automatic switch off when boiling and safety boil-dry cut out. Capacity: 1.7 L.
Please note the kettle colour may vary.
White, 1.5 litre capacity food blender with removable stainless steel blades for easy cleaning. The unit has speeds, pulse function, and non-slip feet. 400 rating.
Comprising an aluminium lamp house on a flexible stem attached to a heavy base with in-line mains on/off switch. Maximum 40 W SES lamp bulb (not supplied). Complete with 13 A plug. Dimensions (H): 365 mm, base diameter 140 mm.
Please note colour may vary.