General Labware

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Seamless viscose cellulose tubing. Should be stored in resealable polythene bag to retain moisture. • MWCO: 12,000-14,000 daltons • Pore size: 24 ångström (2.4 nm)

Gripping width 44 mm. Pack of 10.

Glass with ground edges.

Glass with ground edges.

Borosilicate glass.

Borosilicate glass.

Borosilicate glass.

Raised centre, one end flat and one end scoop, stainless steel. Length 140 mm.

Stainless steel. Suitable for test tubes with an external diameter of 25 mm.Can be easily dismantled for cleaning and sterilisation purposes. Dimensions 270 x 70 x 138 mm (L x W x H).

Epoxy-coated steel wire dual panel draining rack, it can be free standing or used as two wall mounted racks. Contains 122 pegs each peg is 70 mm long arranged as eight rows of ten pegs four each side) and six rows of seven pegs three each side). Dimensions 560 x 580 x 330 mm.

An easy-to-use meter that measures temperature and light. High accuracy, fast response Colour LCD with backlight Max/min recording function Auto power-off (can be disabled) Temperature -20 70°C Light 200 klux Takes 3 x AAA batteries

Iron wire with ceramic centre. Each pack has batch number, and UKAS asbestos certificate is available online. Supplied in packs of 10

Blue epoxy-coated, steel wire test tube rack, resistant to most solvents, weak acids and bases. Will withstand autoclaving up to 121°C

Blue epoxy-coated, steel wire test tube rack, resistant to most solvents, weak acids and bases. Will withstand autoclaving up to 121°C

Blue epoxy-coated, steel wire test tube rack, resistant to most solvents, weak acids and bases. Will withstand autoclaving up to 121°C

Borosilicate glass, with stopcock and disc

Recommended by CLEAPSS' guide GL240, a high-quality burner with refillable gas tank and thumb-operated electric ignition. It provides stable, controllable flame. The housing stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 70 minutes small flame on full tank • Can be refilled with GA130510 • Rekrow model RK4601 • Flame temperature up to 1,250 °C • Output 0.75 kW • 30 g tank capacity • Consumption: 56 g/hour • Base diameter: 79 mm • Width: 127 mm • Height: 75 mm • Weight: 410 g (without fuel) • CE marked

Recommended by CLEAPSS' guide GL240, a high-quality burner with refillable gas tank and thumb-operated electric ignition. It provides stable, controllable flame. The housing stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 70 minutes small flame on full tank • Can be refilled with GA130510 • Rekrow model RK4601 • Flame temperature up to 1,250 °C • Output 0.75 kW • 30 g tank capacity • Consumption: 56 g/hour • Base diameter: 79 mm • Width: 127 mm • Height: 75 mm • Weight: 410 g (without fuel) • CE marked

Recommended by CLEAPSS' guide GL240, a high-quality portable laboratory burner, with refillable gas tank and thumb-operated electric ignition. It provides an adjustable flame, similar to a Bunsen burner. The tank stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 80 minutes small flame on full tank • Can be refilled with GA130510 • Flame temperature up to 1,250 °C • 30 g tank capacity • Width: 115 mm • Height: 96 mm • Weight: 430 g (without fuel)

Recommended by CLEAPSS' guide GL240, a high-quality portable laboratory burner, with refillable gas tank and thumb-operated electric ignition. It provides an adjustable flame, similar to a Bunsen burner. The tank stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 80 minutes small flame on full tank • Can be refilled with GA130510 • Flame temperature up to 1,250 °C • 30 g tank capacity • Width: 115 mm • Height: 96 mm • Weight: 430 g (without fuel)

Receiver adapter, plain with bend.

This two way bench mounted gas tap features drop levers in yellow, allowing you to quickly identify if any taps have been left in the 'on' position. The anti-rotation pin secures the tap from rotating on the surface underneath. An installation template is provided with each tap for a precise fit. The tap is British gas approved and comes with a 5 year warranty.

Fixed swan neck laboratory water tap with a removable nozzle. It has strengthened tubing, anti rotation pin and chemical resistant paintwork.

This laboratory tap has a movable swan neck with a fixed nozzle. It is made of solid brass with a Rilsan coating making it robust and durable. It can be configured for both hot or cold water usage. THE MOVABLE SWAN NECK TAP HAS A 1/2″ BSP MALE INLET.

Cup Polystyrene With Lid

This four-prong, vinyl coated clamp accepts items up to 85 mm diameter. The screw adjustment allows for precise pressure when gripping glass objects, to avoid potential breakage. Constructed from powder-coated high grade zinc alloy with a non-toxic powder finish, non-ferrous, rust free and long lasting. The clamp is attached to a stainless-steel connecting rod, 140 mm long and 10 mm diameter. The prongs are coated in vinyl allowing a strong, slip-free hold and ideal for higher temperature applications. Ideal for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and burettes.

This four-prong, vinyl coated clamp includes a high strength alloy bosshead for securing the clamp to a frame or other apparatus. The bosshead will accept rods measuring up to 18 mm diameter. The screw adjustment allows for precise pressure when gripping glass objects, to avoid potential breakage. This clamp is constructed from powder coated high grade zinc alloy with a non-toxic powder finish. Non-ferrous, rust free and long lasting. The prongs are coated in vinyl for higher temperature applications. Ideal for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and burettes. •Clamp accepts items up to 85 mm diameter •Bosshead fits rods measuring up to 18 mm diameter

Chattaway Spatula Micro 100 mm. Supplied in a pack of 10.