General Labware

Adjustable height maximum 290 mm. Aluminium with stainless steel operating screw top plate with 10 mm tapped hole in right rear corner for accepting retort rods. Both plates are anodised.

Nickel-plated brass cork borers, for cork or rubber stoppers. Plastic handles for comfort. Steel ram rod included. Approx. outer diameter of borers: 12.7 mm, 11.1 mm, 9.5 mm, 7.8 mm, 6.3 mm, 4.7 mm

Nickel plated cork borer.

Assorted pack of tapered, solid bark corks. Supplied in pack of 150.

Nickel plated cork borer.

Nickel plated cork borer.

Nickel plated cork borer.

A boss head in the square pattern. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel thumbscrews. Accepts square sections or rods up to 15 mm diameter. It will also hold flat items such as rulers, magnets, drawing boards, optical screens etc.

A boss head in the square pattern. Die-cast in black finish, with metal thumb screws. Accepts square sections or rods up to 16 mm diameter. It will also hold flat items such as rulers, magnets, drawing boards, optical screens etc. Dimensions: approx. 55 x 55 x 50 mm.

A boss head in the popular pattern. Die-cast alloy in silver finish, with blue plastic thumbscrews. Accepts rods up to 16 mm in diameter. Dimensions: approx. 117 x 30 x 30 mm.

A boss head in the popular pattern. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel thumbscrews. Accepts rods up to 16 mm in diameter.

A boss head in the popular pattern. Die-cast in black finish, with T-pin type screws. Accepts rods up to 16 mm diameter.

Premium quality cast alloy bosshead for rods up to 14 mm diameter.

Polypropylene, horseshoe funnel holder especially for separating funnels. Supplied with two 'olives' so will fit supporting rod diameters to 14 mm. Cannot be used with funnels below 75 mm diameter.

Heavy duty iron with blue finish. All bases have the rod hole tapped 10 x 1.5 mm. (supplied without rod).

Heavy duty iron with blue finish. All bases have the rod hole tapped 10 x 1.5 mm. (supplied without rod).

Tripod pattern, with rod clamp. For rods with maximum diameter 10 mm. Useful as stand for discharge sphere.

Blue painted steel retort stand base. With 10 x 1.5 mm tapped hole.

Pressed steel finished in blue, with tapped hole. 10 x 1.5 mm and rubber feet (without rod).

Blue painted steel retort stand base. With 10 x 1.5 mm tapped hole.

Pressed steel finished in blue, with tapped hole. 10 x 1.5 mm and rubber feet (without rod).

Premium quality cast alloy bosshead for rods up to 14 mm diameter.

This three-finger, vinyl coated clamp accepts items up to 85 mm diameter. The screw adjustment allows for precise pressure when gripping glass objects, to avoid potential breakage. Constructed from powder-coated high grade zinc alloy with a non-toxic powder finish, non-ferrous, rust free and long lasting. The clamp is attached to a stainless-steel connecting rod, 140 mm long and 10 mm diameter. The prongs are coated in vinyl allowing a strong, slip-free hold and ideal for higher temperature applications. Ideal for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and burettes.

This three-finger, vinyl coated clamp includes a high strength alloy bosshead for securing the clamp to a frame or other apparatus. The bosshead will accept rods measuring up to 18 mm diameter. The screw adjustment allows for precise pressure when gripping glass objects, to avoid potential breakage. This clamp is constructed from powder coated high grade zinc alloy with a non-toxic powder finish. Non-ferrous, rust free and long lasting. The prongs are coated in vinyl for higher temperature applications. Ideal for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and burettes. •Clamp accepts items up to 85 mm diameter •Bosshead fits rods measuring up to 18 mm diameter

A four-prong, cork-lined clamp. Made from high-grade aluminium alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 105 mm diameter. The rod version has stainless steel 14o mm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

Heavy duty iron with blue finish. All bases have the rod hole tapped 10 x 1.5 mm. (supplied without rod).

Stump-shaped cast iron retort base with clamp. Finished in stoved enamel, it is designed to accept 10 mm diameter rods. Complete with thumb-screw clamp. Weight: 0.57 kg.

A four-prong, cork-lined clamp, in die-cast alloy, with other parts in plated brass. The clamp accepts items 2-90 mm diameter, and is operated by T-pin type screws. Overall length 25 cm.

A three-finger, PVC-lined clamp, in die-cast alloy, with 135 mm rod of 8 mm diameter. The clamp accepts items up to 90 mm diameter, and is operated by blue plastic coated thumbscrews. Overall length 250 mm.

Iron with stoved enamel finish, with central rod hole, tapped 10 x 1.5 mm, with rubber feet. Size given is length of foot to the rod.

Iron with stoved enamel finish, with tapped rod hole, 10 x 1.5 mm. Dimensions (Length of side): 200 mm.

A three-finger, vinyl coated clamp. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 85 mm diameter. The rod version has stainless steel 14 cm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

A four-prong, cork-lined clamp. Made from high-grade aluminium alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 105 mm diameter. The rod version has stainless steel 14o mm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

A three-finger, vinyl coated clamp. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 85 mm diameter. The rod version has stainless steel 14 cm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

This retort clamp is perfect for holding lab equipment in place during delicate experiments. The four prongs on the clamp provide more points of contact, and the cork lining on the jaws gives the clamp a firm, yet gentle grip on glassware. The steel retort clamp measures approximately 250 mm in length, the jaws are lined with cork to protect lab ware, and can open to 80 mm in diameter.

Mild steel, plated. 10 x 1.5 mm screwthread.

PVC coated diecast jaw, with clamping tommy-bar screw through swivels, mounted on 135 mm rod with a diameter of 8 mm. The jaw capacity is 90 mm and the overall length is 250 mm.

Plated mild steel, plain 8 mm diameter stem for use with separate bosshead.

Plated mild steel, plain 8 mm diameter stem for use with separate bosshead.

Plated mild steel, plain 8 mm diameter stem for use with separate bosshead.

Borosilicate glass stirring rod, 200 mm.

Borosilicate glass stirring rod, 300 mm.

Borosilicate glass stirring rod, 150 mm.

White polypropylene stirring rod, 200 mm.

White polypropylene stirring rod, 150 mm.

Soda glass rod, 500 x 7 mm.

Soda glass rod, 500 x 8 mm.

Polypropylene stirring rod, 200 mm.

Polypropylene stirring rod, 150 mm.

Suitable for micro scale work. Stainless Steel. Blade width: 4 mm.