Timstar

DO-41 Plastic case, 1 A silicon rectifier diodes. 1 A/50 V.

Photoconductive cadmium sulphide light dependent resistor (LDR) in a miniature epoxy sealed open frame package (4 mm dia.). Cell resistance reduces as light falling on the device increases. Typical applications include light control, cameras, toys etc. Sold as pack of 10. • Peak spectral response: 540 nm. • Light resistance: 50-100 Kohm • Dark resistance: 20 Mohm minimum • Max. voltage: 100 V • Power max: 90 mW • Working temp. range: -20 to +60°

Photoconductive cadmium sulphide cell with a spectral response similar to the human eye. As light falling on the cell increases, so the resistance of the cell decreases. Peak spectral response: Typ. 550 nm. Cell resistance: 9 kΩ at 10 lux. 400 Ω at 1000 lux. Dark resistance: Min. 1 MΩ. Sold as pack of 5.

High quality 5 mm LED indicators with diffused lens. Maximum voltage 3.0 V DC. PCB or panel mount. Sold as pack of 10.

High quality 5 mm LED indicators with diffused lens. Maximum voltage 3.0 V DC. PCB or panel mount. Sold as pack of 10.

High quality 5 mm LED indicators with diffused lens. Maximum voltage 3.0 V DC. PCB or panel mount. Sold as pack of 10.

High quality 5 mm LED indicators with diffused lens. Maximum voltage 3.0 V DC. PCB or panel mount. Sold as pack of 10.

High quality 5 mm LED indicators with diffused lens. Maximum voltage 3.0 V DC. PCB or panel mount. Sold as pack of 10.

Miniature, circular DC motors, ideal for models and educational applications. The MM10 version has flat side. RoHS compliant. Sold as pack of 10.

Miniature, circular DC motors, ideal for models and educational applications. The MM10 version has flat side. RoHS compliant. Sold as pack of 10.

Miniature, circular DC motors, ideal for models and educational applications. The MM10 version has flat side. RoHS compliant. Sold as pack of 10.

Ideal for projects, providing high power and low speed and designed to fit our MM28 type motors. The Perspex base incorporates holes for screw fixing if required. The assembly also includes precision worm and gearwheel, and 150 mm long 4 mm dia. output shaft. RoHS compliant. Motor not included.

High quality wire-wound controls, ideal for loudspeaker volume controls, miniature motor speed controllers, etc. Power rating: 5W; Resistance tolerance: ±20%; Spindle rotation: 300° ±5°; Max. operating voltage: 120V; Breakdown voltage: 200V. Body Dimensions (Dia. x D): 24 x 11mm. Spindle Dimensions (L x Dia.): 6.5 x 6 mm.

6 W, 5 % tolerance wire-wound power resistors which have flame retardant coating, along with ceramic cores and metal alloy resistance wire, offering high resistance stability, excellent heat dissipation and low noise. Sold in packs of 10. • Power rating: 6 W • Resistance tolerance: ±5 % • Max. working voltage: 350 V • Temperature range: -55 °C to +155 °C • Dimensions: 24 x 8 mm

6 W, 5 % tolerance wire-wound power resistors which have flame retardant coating, along with ceramic cores and metal alloy resistance wire, offering high resistance stability, excellent heat dissipation and low noise. Sold in packs of 10. • Power rating: 6 W • Resistance tolerance: ±5 % • Max. working voltage: 350 V • Temperature range: -55 °C to +155 °C • Dimensions: 24 x 8 mm

A kit containing total of 1000 0.25W 5% carbon film resistors. Values ranging from 4.7Ω through to 10MΩ. total of 63 different values, this makes an ideal starter kit.

Miniature low cost push to make switch with red button. Sold in packs of 10.

Contact make-and-break switch (push to make) with sprung contact, mounted on an insulated base.

A mini toggle switcs, which is rugged and reliable. Complete with fittings for mounting. Rating: 1 A 250 V AC Contacts: Nickel plated brass. Panel cut-out: 7.0 mm.

30 Ohm NTC (Negative Temperature Coefficient) miniature disc thermistors, for general purpose applications such as temperature measurement and thermal compensation circuits. Also useful in the classroom for demonstrating how the resistance changes with temperature. thermistor is temperature dependant resistor or 'thermal resistor'. The thermistors are clearly coded. Sold in packs of 10. • Temperature range: -30 °C to +125 °C • Tolerance: 10 %

Nickel plated steel.Takes 4 mm plug. 10 max current.

For DC only with 4 mm terminals.

This analogue voltmeter, specifically designed for use by students, is sturdy instrument for measurement of both AC and DC voltage. The instrument comes with DC/AC switch and has three voltage ranges. Analogue meters can be more useful than digital meters for certain applications, and often provide more visually stable reading. This instrument is electronically protected against overload but must not be connected to voltages exceeding 30 V. • AC and DC ranges: 0-3 V; 0-15 V; 0-30 • Precision: 2 of full scale • Impedance: 10 kΩ/V • Electronically protected against overload • Dimensions: 158 x 108 x 56 mm • Scale length: 72 mm

This analogue ammeter, specifically designed for use by students, is sturdy instrument for measurement of both AC and DC current. The instrument comes with DC/AC switch and has three current ranges. Analogue meters can be more useful than digital for certain applications, and often provide more visually stable reading. This instrument is electronically protected against overload and will tolerate overloads up to 15 for at least 10 seconds. • AC and DC ranges: 0-0.05 A; 0-0.5 A; 0-5 A • Precision: ±2 of full scale • Impedance: 10 kΩ/V • Max. voltage drop: DC: 0.25 V; AC: 0.27 V • Electronically protected against overload • Dimensions: 158 x 108 x 56 mm • Scale length: 72 mm

This galvanometer, specifically designed for use by students, is sturdy but sensitive instrument for the measurement of small currents. The instrument has centre-zero scale and three current ranges and is electronically protected against overload, tolerating overloads of up to up to A for at least 10 seconds. • DC ranges: ± 5 mA; ± 500 μA; ±50 μA • Centre-zero scale • Precision: ± 5 % of full scale • Internal resistance: ± 5 mA: ca. Ω; ± 500 µA: ca. 90 Ω; ± 50 µA: ca. 900 Ω • Electronically protected against overload • Dimensions: 158 x 108 x 56 mm • Scale length: 72 mm

Moving coil DC milliammeters with zero adjust, fully enclosed in robust housing, with clear acrylic front cover. • Scale length: 60 mm • Accuracy: ±2.5 % • Dimensions: 125 x 80 x 80 mm

Moving coil DC milliammeters with zero adjust, fully enclosed in robust housing, with clear acrylic front cover. • Scale length: 60 mm • Accuracy: ±2.5 % • Dimensions: 125 x 80 x 80 mm

Economical analogue bench meters designed for education. Large, easy-to-read scales. Connection via 4 mm terminal posts. • Accuracy: 2.5 % • Dimensions: 100 x 133 x 97 mm

Economical analogue bench meters designed for education. Large, easy-to-read scales. Connection via 4 mm terminal posts. • Accuracy: 2.5 % • Dimensions: 100 x 133 x 97 mm

Moving coil DC microammeter with zero adjust, fully enclosed in robust housing, with clear acrylic front cover. • Range: 0-500 µA • Resolution: 10 µA • Scale length: 60 mm • Dimensions: 125 x 80 x 80 mm

Economic, robust digital meters, housed in sturdy ABS case with clear LCD screen. Input is via 4 mm sockets on the front panel, which features an on/off switch. Each meters requires a 9 V, PP3 battery (NOT included). Dimensions (W x D x H): 100 x 140 x 100 mm.

Economic, robust digital meters, housed in sturdy ABS case with clear LCD screen. Input is via 4 mm sockets on the front panel, which features an on/off switch. Each meters requires a 9 V, PP3 battery (NOT included). Dimensions (W x D x H): 100 x 140 x 100 mm.

Supplied in strong high grade ABS case with large bold LCD and 4 mm colour coded sockets. Powered by 1 x 9V PP3 Battery (supplied). Dimensions (L x W x H): 95 x 90 x 75mm.

Supplied in strong high grade ABS case with large bold LCD and 4 mm colour coded sockets. Powered by 1 x 9V PP3 Battery (supplied). Dimensions (L x W x H): 95 x 90 x 75mm.

This meter comes in a moulded plastic cases and features a 25 mm LCD. Input is via colour coded 4 mm sockets and the unit is short circuit and overload protected. Powered by a 9 PP3 battery (not supplied). Dimensions (L x W x D): 115 x 80 x 45 mm.

This meter comes in a moulded plastic cases and features a 25 mm LCD. Input is via colour coded 4 mm sockets and the unit is short circuit and overload protected. Powered by a 9 PP3 battery (not supplied). Dimensions (L x W x D): 115 x 80 x 45 mm.

This meter comes in a moulded plastic cases and features a 25 mm LCD. Input is via colour coded 4 mm sockets and the unit is short circuit and overload protected. Powered by a 9 PP3 battery (not supplied). Dimensions (L x W x D): 115 x 80 x 45 mm.

This meter comes in a moulded plastic cases and features a 25 mm LCD. Input is via colour coded 4 mm sockets and the unit is short circuit and overload protected. Powered by a 9 PP3 battery (not supplied). Dimensions (L x W x D): 115 x 80 x 45 mm.

This updated USB version of the low voltage Joulemeter includes datalogging and an improved specification and can be used with or without computer. Designed to be simple enough to use at KS3, and flexible enough for more advanced use at KS4 and beyond, the Joulemeter simply requires an input supply and load to be plugged in (e.g. solar panel and motor) and the meter will display the values of the power and the energy transferred. For simplicity, the instrument automatically adjusts the display to show suitable units and an appropriate number of decimal places, so that it can deal with a very wide range of values (e.g. for energy, from 100 nanojoules up to 1.75 megajoules). This version of the Joulemeter functions almost identically to the previous version but in addition the meter also keeps a log at the chosen sample rate when the total energy transferred is being measured; the data can then be loaded on to PC using free mini-datalogger software. The function button allows any of four settings to be selected for the required quantity to be measured (energy and time; power; average power; voltage, current and power). • Current range: ±7 (current can flow in either direction) • Voltage range: ±25 V • Log memory: 2500 samples • Log sample period: 1, 2, or 4 seconds • Powered via USB or using the 5 V mains adaptor (included)

The MY60 is high quality, high-accuracy 3.5 digit multimeter offering excellent value for money. This meter has thirty two ranges, which cover measurement of AC and DC voltage, AC and DC current and resistance plus test positions for diodes and transistors. It also incorporates an audible continuity tester, large, clear LCD display and 'low battery' indicator which shows when the battery is exhausted. The meter is supplied with rubberised holster for protection, which has 2-height stand built in along with clips to hold the test probes. Designed in accordance with IEC-1010. Supplied complete with holster, test probes, PP3 battery and instruction manual. Weight: 310 g (including battery). Dimensions (D x W x H): 31.5 x 91 x 189 mm. Features: • 32 Ranges • Large LCD 3.5 digits • Auto power off • DC voltage: 200m/2/20/200V ±0.5%, 1000V ±0.8% • AC voltage: 200mV ±1.2%, 2/20/200V ±0.8%, 700V ±1.2% • DC current: 20µA ±2.0%, 200µA/2m/20mA ±0.8%, 200m/2A ±1.5%, 10A ±2.0% • AC current: 20µ/200m/2A ±1.8%, 2m/20mA ±1.0%, 10A ±3.0% • Resistance: 200/2k/20k/200k/2MΩ ±0.8%, 20MΩ ±1.0%, 200MΩ ±5.0% • Continuity checking with buzzer • Diode check: Test current 1.0mA, test voltage 2.8 • Power: PP3 (9V) 1 • hFE: ~ 1000 • Display: 30mm x 60mm LCD

An easy to use compact 3.5 digit LCD multimeter. Supplied with test leads, battery and boot. Dimensions (L x W x D): 162 x 86 x 33 mm. Features: • DC volts 200mV to 1kV • AC volts 200mV to 750V, • DC amps 20mA to 10A • Resistance 200Ω to 2MΩ • Diode Test • Continuity

Leads come ready assembled with moulded-on strain reliefs. BNC plug to crocodile clips.

Leads come ready assembled with moulded-on strain reliefs. BNC plug to stackable 4 mm plugs.

Leads come ready assembled with moulded-on strain reliefs. BNC plug to 4 mm sockets.

This multi-purpose microphone has been designed for a number of applications and experiments requiring the use and demonstration of audio input, including voice and music waveforms. The electret condenser type microphone is mounted in a moulded plastic box with two standard 4 mm output connectors, an on/off switch and a power indicator. • Electrical Supply: 9V PP3 battery (supplied) • Dimensions: 68 x 120 x 36 mm • Mass: 0.15 kg • Sensitivity: -42 db • Frequency Response: 20 Hz to 20 kHz • Output Impedance: 2.2 kohm

A simple to build festive project supplied with comprehensive instructions. Contents: • 16x 2.2 V 5 mm Red LEDs • 4x 100 R 0.25 W resistors • 4x 100 k 0.25 W resistors • 2x 10 uF capacitors • 2x 22 uF capacitors • 4x NPN transistors • 1x miniature slide switch • 1x PP3 battery clip • 1x PCB Requirements: • Soldering iron • Solder • ""Helping hands"" (optional) • ""Solder sucker"" (optional) • Cutters • PP3 battery

20 x 5 mm, 250 V AC. Supplied in packs of 10.

20 x 5 mm, 250 V AC. Supplied in packs of 10.

20 x 5 mm, 250 V AC. Supplied in packs of 10.

6.3 x 25.4 mm. 240 V AC. To BS 1362. Supplied in packs of 10.

20 x 5 mm. 250 V AC. Supplied in packs of 10.

Set of 10 leads, in five assorted colours. Terminated at each end with vinyl sleeved crocodile clip.

Vinyl covered crocodile clips, in packs of 20 (10 black and 10 red). Length 460 mm.

5kV lead.

5kV lead.

100 mm length of flexible wire covered in colour coded P.V.C. terminated at each end with 2 mm in-line stackable plug. Sold in packs of 5.

100 mm length of flexible wire covered in colour coded P.V.C. terminated at each end with 2 mm in-line stackable plug. Sold in packs of 5.

300 mm length of flexible wire covered in colour coded P.V.C. terminated at each end with 2 mm in-line stackable plug. Sold in packs of 5.

300 mm length of flexible wire covered in colour coded P.V.C. terminated at each end with 2 mm in-line stackable plug. Sold in packs of 5.

Extra flexible leads with 4 mm stackable plug at one end and standard crocodile clip at the other. Length: 300 mm. Supplied in packs of 5.

Extra flexible leads with 4 mm stackable plug at one end and standard crocodile clip at the other. Length: 300 mm. Supplied in packs of 5.

These quality plug leads come with 4 mm stackable, insulated plugs and extra flexible 0.75 mm, 95/0.01 mm sheathed copper cable, which is rated at 15 A/60 V DC. Supplied in packs of 5.

These quality plug leads come with 4 mm stackable, insulated plugs and extra flexible 0.75 mm, 95/0.01 mm sheathed copper cable, which is rated at 15 A/60 V DC. Supplied in packs of 5.

These quality plug leads come with 4 mm stackable, insulated plugs and extra flexible 0.75 mm, 95/0.01 mm sheathed copper cable, which is rated at 15 A/60 V DC. Supplied in packs of 5.

These quality plug leads come with 4 mm stackable, insulated plugs and extra flexible 0.75 mm, 95/0.01 mm sheathed copper cable, which is rated at 15 A/60 V DC. Supplied in packs of 5.

These quality plug leads come with 4 mm stackable, insulated plugs and extra flexible 0.75 mm, 95/0.01 mm sheathed copper cable, which is rated at 15 A/60 V DC. Supplied in packs of 5.

These quality plug leads come with 4 mm stackable, insulated plugs and extra flexible 0.75 mm, 95/0.01 mm sheathed copper cable, which is rated at 15 A/60 V DC. Supplied in packs of 5.

Schutzinger brand professional quality 4 mm stackable test leads, utilising 1 mm2 double insulated highly flexible PVC cable and terminated at each end with stackable 4 mm plug. • Cable: 1.0 mm2 double insulated PVC • Plugs: Nickel plated brass body lamella basket spring • Plug length: 48 mm • Voltage: 33 V AC / 70 V DC • Current (max): 16 A

Schutzinger brand professional quality 4 mm stackable test leads, utilising 1 mm2 double insulated highly flexible PVC cable and terminated at each end with stackable 4 mm plug. • Cable: 1.0 mm2 double insulated PVC • Plugs: Nickel plated brass body lamella basket spring • Plug length: 48 mm • Voltage: 33 V AC / 70 V DC • Current (max): 16 A

Schutzinger brand professional quality 4 mm stackable test leads, utilising 1 mm2 double insulated highly flexible PVC cable and terminated at each end with stackable 4 mm plug. • Cable: 1.0 mm2 double insulated PVC • Plugs: Nickel plated brass body lamella basket spring • Plug length: 48 mm • Voltage: 33 V AC / 70 V DC • Current (max): 16 A

Schutzinger brand professional quality 4 mm stackable test leads, utilising 1 mm2 double insulated highly flexible PVC cable and terminated at each end with stackable 4 mm plug. • Cable: 1.0 mm2 double insulated PVC • Plugs: Nickel plated brass body lamella basket spring • Plug length: 48 mm • Voltage: 33 V AC / 70 V DC • Current (max): 16 A

Sturdy lab lead holder for wall mounting, using screws. The holder is made from painted steel, with 13 slots, and can accommodate approximately 50 leads (leads not supplied). Overall dimensions 260 x 82 x 15 (in mm). The holder has 2 x 6 mm width slots, 2 x 3 mm width slots and 9 x 4 mm width slots.

This moving coil meter is fitted onto large carrier and provides an easy visual reading of voltage.

This moving coil meter is fitted onto large carrier and provides an easy visual reading of current.

This moving coil meter is fitted onto large carrier and provides an easy visual reading of current.

Locktronics Resistor, 3.9 ohm, 3 W, 5%.

Locktronics resistor, 10 ohm, 3W, 5%

Locktronics resistor, 100 ohm, 3W, 5%.

Locktronics Potentiometer, 250 ohm.

Locktronics Potentiometer, 100 k.

Locktronics thermistor, 470 ohm, NTC.

Locktronics Diode, power, 1 A, 50 V.

Locktronics connecting link.

Locktronics lampholder, MES.

Locktronics LED, red.

Locktronics blank carrier, small.

Locktronics motor, 3 to 12 V DC, 0.7 A.

Locktronics motor, 6 V, open frame.

Locktronics reed relay, normally open.

Locktronics switch, push to make, metal strip.

Locktronics reed switch, normally open.

Locktronics solenoid.

Locktronics buzzer, 6 V, 15 mA.

This carrier connects an external power supply to a carrier with a battery symbol on it to allow 'plug top' power supplies to be used with Locktronics kits.

35 pillar Locktronics baseboard used to mount your Locktronics carriers onto to build your circuit.

16 pillar Locktronics baseboard onto which you can securely mount your Locktronics carriers to build your circuit. Board comes with battery retaining clips.

Locktronics battery retaining clip.

This kit provides comprehensive range of practical assignments for electricity and magnetism and is ideal for those who are studying science and electricity for science students. The kit is supplied with comprehensive set of worksheets that cover the electrical and electronic principles. Suitable for students of Physics aged 16 to 18. Kit contains: • Plastic trays lids • 1 Power supply • 1 Small bar magnet • 3 MES bulb, 6 V, 0.04 A • 1 Capacitor, 22,000 µF, Electrolytic 16 V • 1 Locktronics User Guide • 1 Resistor, 100 ohm, 1 W, 5% (DIN) • 1 Capacitor, 1,000 µF, Electrolytic 30 V • 1 Resistor, 10 ohm, 1 W 5% (DIN) • 1 Resistor, 47 ohm, 1/2 W, 5% (DIN) • Transformer, 2:1 turns ratio • 1 Light dependent resistor • 1 Resistor, 1 k, 1/4 W, 5% (DIN) • 1 Resistor, 10 k, 1/4 W, 5% (DIN) • 1 Resistor, 270 ohm, 1/2 W, 5% (DIN) • 1 Potentiometer, 250 ohm (DIN) • 1 Resistor, 5.6 k, 1/4 W, 5% (DIN) • 1 Resistor, 3.9 ohm, 3 W, 5% (DIN) • 1 Resistor, 68 ohm 1/2 W, 5% (DIN) • 12 Connecting Links • 3 Lamp holders, MES • 1 x 400 turn induction coil • 1 Thermistor, 4.7 k, NTC (DIN) • 1 Capacitor, 2,200 µF, Electrolytic, 25 V • 1 Capacitor, 1 µF, Polyester • 1 Switch, on/off, metal strip • 1 Resistor, 22 k, 1/4 W, 5% (DIN) • 1 Choke, 47 mH • 1 Resistor, 2.2 k, 1/4 W, 5% (DIN) • LED, red, 12V (SB) • 1 Curriculum CD ROM • 3 AA battery holder carrier • 1 x 1:1 transformer with retractable ferrite core • 1 Nichrome Wire Carrier, 0.075 500 mm • 1 Nichrome Wire Carrier, 0.075 250 mm • 1 Nichrome Wire Carrier, 0.21 500 mm • 1 Constantan Wire Carrier, 0.075 500 mm • 1 Power supply carrier with battery symbol • 7 x 5 metric baseboard with 4 mm pillars Topics students can study include: • Batteries in series and parallel • Internal resistance of batteries • Power dissipation and efficiency • Potential dividers • Resistivity • Kirchoff's laws • AC circuits • Capacitors • Transformers

This kit provides comprehensive range of practical assignments into electricity and magnetism and is ideal for those who are studying science and electricity within wide variety of academic or vocational courses. The kit is supplied with comprehensive set of worksheets that covers the electrical properties of materials, and introduces students to electricity. Suitable for pupils from age 11 upwards. Kit contains: • 1 Locktronics blister pack clear tray insert • 1 Adjustable DC power supply • 2 BNC male to dual 4 mm binding posts • 1 AC voltage source carrier • 1 Resistor, 100 ohm, 1 W, 5% (DIN) • 1 Low power solar motor • 1 Resistor, 1 k, 1/4 W, 5% (DIN) • 2 Resistors, 10 k, 1/4 W, 5% (DIN) • 1 Potentiometer, 10 k (DIN) • 1Capacitor, 0.1 µF, Polyester • 9 Connecting Links • 1 Thermistor, 470 ohm, NTC (DIN) • 2 Leads, red, 500 mm, 4 mm to 4 mm stackable • 3 Leads, black, 500 mm, 4 mm to 4 mm stackable • 1 Lead, blue, 500 mm, 4 mm to 4 mm stackable • 1 Capacitor, 100 µF, Electrolytic, 25 V • 1 Capacitor, 1 µF, Polyester • 1 Op Amp Carrier (TL081) with 2 mm to 4 mm Lead • 1 LED, red, 12 V (SB) • 1 LED, green, 12 V (SB) • 1 Dual rail power supply carrier • 1 Speaker • 1 Voltmeter, +/- 7.5 V The following experiments and learning objectives are covered: • Electrical properties of materials • Simple circuits • Heat and magnetism • Basic circuit symbols • Current flow • Series and parallel circuits • Patterns of voltage and current • Electrical sensors • Relays and electromagnets

This kit is complete teaching and storage solution with classroom friendly trays and foam to keep carriers tidy and secure. The solution comes with baseboard with battery retaining clips, power supply and power supply carrier allowing you to choose the most appropriate power source for teaching simple circuits. Extensive curriculum is provided to guide the teaching and learning of electricity required at Key Stage 2. Kit contains: • 1 x Deep storage tray with lid, foam insert and daughter tray • 1 x International power supply • 3 x 2.5 V, 0.2 A MES bulbs • 1 x Locktronics baseboard with battery retaining clips • 9 x Connecting Links • 3x Lampholder carriers • 1 x 75 mm black lead • 1 x 75 mm red lead • 1 x Press switch • 1 x On/off switch • 1 x Buzzer • 1 x Motor • 1 x Curriculum pack CD ROM • 1x Power supply carrier with battery symbol