Timstar

This useful washing/rinsing system allows pipettes and burettes to be automatically rinsed when connected to a tap and drain outlet. Particularly useful where unpleasant or hazardous liquids have been used, the apparatus holds pipettes and burettes up to 600 mm in length. For convenience and flexibility, the washing/rinsing system is available as separate components. 1. The polyethylene rinser/washer fills via the spray nozzle on the top rim. Contaminated water will syphon out totally, once the syphon point at the top of the rinser has been reached via the large diameter drain situated at the lowest point, before refilling automatically. 2. During washing the pipettes/burettes are housed in a specially designed basket, which minimise breakages as it buffers the glassware tips against the soft polyethylene base. 3. A soaking jar is available, which will hold pipette/burette basket, to allow the glassware to soak before rinsing. Low water flow rate is NOT problem, but it is better to adjust the flow for cycle of about 90 seconds.

This useful washing/rinsing system allows pipettes and burettes to be automatically rinsed when connected to a tap and drain outlet. Particularly useful where unpleasant or hazardous liquids have been used, the apparatus holds pipettes and burettes up to 600 mm in length. For convenience and flexibility, the washing/rinsing system is available as separate components. 1. The polyethylene rinser/washer fills via the spray nozzle on the top rim. Contaminated water will syphon out totally, once the syphon point at the top of the rinser has been reached via the large diameter drain situated at the lowest point, before refilling automatically. 2. During washing the pipettes/burettes are housed in a specially designed basket, which minimise breakages as it buffers the glassware tips against the soft polyethylene base. 3. A soaking jar is available, which will hold pipette/burette basket, to allow the glassware to soak before rinsing. Low water flow rate is NOT problem, but it is better to adjust the flow for cycle of about 90 seconds.

Soaking jar for BU120110 or BU120115.

Basket for BU120110 or BU120115.

Basket for BU120110 or BU120115.

Polypropylene. To hold 10 pipettes up to 15 mm diameter and further 18 up to 10 mm diameter vertically.

For dropping pipettes.

For dropping pipettes.

For dropping pipettes.

A boss head in the popular pattern. Die-cast in black finish, with T-pin type screws. Accepts rods up to 16 mm diameter.

A boss head in the square pattern. Die-cast in black finish, with metal thumb screws. Accepts square sections or rods up to 16 mm diameter. It will also hold flat items such as rulers, magnets, drawing boards, optical screens etc. Dimensions: approx. 55 x 55 x 50 mm.

A boss head in the popular pattern. Die-cast alloy in silver finish, with blue plastic thumbscrews. Accepts rods up to 16 mm in diameter. Dimensions: approx. 117 x 30 x 30 mm.

A boss head in the popular pattern. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel thumbscrews. Accepts rods up to 16 mm in diameter.

A boss head in the square pattern. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel thumbscrews. Accepts square sections or rods up to 15 mm diameter. It will also hold flat items such as rulers, magnets, drawing boards, optical screens etc.

Premium quality cast alloy bosshead for rods up to 14 mm diameter.

Premium quality cast alloy bosshead for rods up to 14 mm diameter.

Polypropylene, horseshoe funnel holder especially for separating funnels. Supplied with two 'olives' so will fit supporting rod diameters to 14 mm. Cannot be used with funnels below 75 mm diameter.

Tripod pattern, with rod clamp. For rods with maximum diameter 10 mm. Useful as stand for discharge sphere.

Blue painted steel retort stand base. With 10 x 1.5 mm tapped hole.

Blue painted steel retort stand base. With 10 x 1.5 mm tapped hole.

Pressed steel finished in blue, with tapped hole. 10 x 1.5 mm and rubber feet (without rod).

Pressed steel finished in blue, with tapped hole. 10 x 1.5 mm and rubber feet (without rod).

Heavy duty iron with blue finish. All bases have the rod hole tapped 10 x 1.5 mm. (supplied without rod).

Heavy duty iron with blue finish. All bases have the rod hole tapped 10 x 1.5 mm. (supplied without rod).

Heavy duty iron with blue finish. All bases have the rod hole tapped 10 x 1.5 mm. (supplied without rod).

Iron with stoved enamel finish, with tapped rod hole, 10 x 1.5 mm. Dimensions (Length of side): 200 mm.

Iron with stoved enamel finish, with central rod hole, tapped 10 x 1.5 mm, with rubber feet. Size given is length of foot to the rod.

Stump-shaped cast iron retort base with clamp. Finished in stoved enamel, it is designed to accept 10 mm diameter rods. Complete with thumb-screw clamp. Weight: 0.57 kg.

A four-prong, cork-lined clamp, in die-cast alloy, with other parts in plated brass. The clamp accepts items 2-90 mm diameter, and is operated by T-pin type screws. Overall length 25 cm.

A three-finger, PVC-lined clamp, in die-cast alloy, with 135 mm rod of 8 mm diameter. The clamp accepts items up to 90 mm diameter, and is operated by blue plastic coated thumbscrews. Overall length 250 mm.

This three-finger, vinyl coated clamp accepts items up to 85 mm diameter. The screw adjustment allows for precise pressure when gripping glass objects, to avoid potential breakage. Constructed from powder-coated high grade zinc alloy with a non-toxic powder finish, non-ferrous, rust free and long lasting. The clamp is attached to a stainless-steel connecting rod, 140 mm long and 10 mm diameter. The prongs are coated in vinyl allowing a strong, slip-free hold and ideal for higher temperature applications. Ideal for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and burettes.

This three-finger, vinyl coated clamp includes a high strength alloy bosshead for securing the clamp to a frame or other apparatus. The bosshead will accept rods measuring up to 18 mm diameter. The screw adjustment allows for precise pressure when gripping glass objects, to avoid potential breakage. This clamp is constructed from powder coated high grade zinc alloy with a non-toxic powder finish. Non-ferrous, rust free and long lasting. The prongs are coated in vinyl for higher temperature applications. Ideal for beakers, Erlenmeyer flasks, test-tubes, boiling flasks and burettes. •Clamp accepts items up to 85 mm diameter •Bosshead fits rods measuring up to 18 mm diameter

A four-prong, cork-lined clamp. Made from high-grade aluminium alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 105 mm diameter. The rod version has stainless steel 14o mm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

A four-prong, cork-lined clamp. Made from high-grade aluminium alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 105 mm diameter. The rod version has stainless steel 14o mm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

A three-finger, vinyl coated clamp. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 85 mm diameter. The rod version has stainless steel 14 cm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

A three-finger, vinyl coated clamp. Made from high-grade zinc alloy, with non-toxic blue powder finish, and stainless steel T-pin type screws. Accepts items up to 85 mm diameter. The rod version has stainless steel 14 cm rod of 10 mm diameter The boss version attaches to rod up to 18 mm diameter.

This retort clamp is perfect for holding lab equipment in place during delicate experiments. The four prongs on the clamp provide more points of contact, and the cork lining on the jaws gives the clamp a firm, yet gentle grip on glassware. The steel retort clamp measures approximately 250 mm in length, the jaws are lined with cork to protect lab ware, and can open to 80 mm in diameter.

PVC coated diecast jaw, with clamping tommy-bar screw through swivels, mounted on 135 mm rod with a diameter of 8 mm. The jaw capacity is 90 mm and the overall length is 250 mm.

Plated mild steel, plain 8 mm diameter stem for use with separate bosshead.

Plated mild steel, plain 8 mm diameter stem for use with separate bosshead.

Plated mild steel, plain 8 mm diameter stem for use with separate bosshead.

Mild steel, plated. 10 x 1.5 mm screwthread.

Mild steel, plated. 10 x 1.5 mm screwthread.

Mild steel, plated. 10 x 1.5 mm screwthread.

Mild steel, plated. 10 x 1.5 mm screwthread.

Aluminium alloy, bright finish. 10 x 1.5 mm screwthread.

Aluminium alloy, bright finish. 10 x 1.5 mm screwthread.

Aluminium alloy, bright finish. 10 x 1.5 mm screwthread.

Soda glass rod, 500 x 4 mm.

Soda glass rod, 500 x 5 mm.

Soda glass rod, 500 x 6 mm.

Soda glass rod, 500 x 7 mm.

Soda glass rod, 500 x 8 mm.

White polypropylene stirring rod, 150 mm.

White polypropylene stirring rod, 200 mm.

Borosilicate glass stirring rod, 150 mm.

Borosilicate glass stirring rod, 200 mm.

Borosilicate glass stirring rod, 300 mm.

Polypropylene stirring rod, 150 mm.

Polypropylene stirring rod, 200 mm.

Polypropylene stirring rod, 250 mm.

Polythene. Rigid with handle.

Stainless steel. Width 8 mm.

Suitable for micro scale work. Stainless Steel. Blade width: 4 mm.

Raised centre, one end flat and one end scoop, stainless steel. Length 140 mm.

Stainless steel.

Stainless steel.

Stainless steel. Length 175 mm.

Great value, disposable spatulas/stirrers, made from 100% sustainable birch wood. Supplied in pack of 1,000.

Adjustable height maximum 290 mm. Aluminium with stainless steel operating screw top plate with 10 mm tapped hole in right rear corner for accepting retort rods. Both plates are anodised.

Adjustable height maximum 290 mm. Aluminium with stainless steel operating screw top plate with 10 mm tapped hole in right rear corner for accepting retort rods. Both plates are anodised.

Nickel plated cork borer.

Nickel plated cork borer.

Nickel plated cork borer.

Nickel plated cork borer.

Allows uniform, straight holes to be drilled in cork and rubber stoppers. Easier to use, with lower health and safety risk than hand-held borers. Comprises cast iron frame with 10 cm diameter wooden platform, with stopper holder, and hand crank driver. The base has four drilled holes for securing the unit to benchtop. Includes 12 nickel-plated borers of the following sizes: 4.35, 5.50, 6.00, 6.50, 8.25, 9.75, 10.50, 12.60, 13.60, 16.00, 16.60, and 19.00 mm.

Nickel-plated brass cork borers, for cork or rubber stoppers. Plastic handles for comfort. Steel ram rod included. Approx. outer diameter of borers: 12.7 mm, 11.1 mm, 9.5 mm, 7.8 mm, 6.3 mm, 4.7 mm

Assorted pack of tapered, solid bark corks. Supplied in pack of 150.

Plastic stoppers for reagent bottles etc. Supplied in packs of 5.

Plastic stoppers for reagent bottles etc. Supplied in packs of 5.

Plastic stoppers for reagent bottles etc. Supplied in packs of 5.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.

Supplied in pack of 10.