Timstar
Filter Flask, Timstar, 100 mL
Heavy wall, screw thread connection. Screw thread connector fits mm bore tubing.
165.21 AED
Filter Flask, Timstar, 250 mL
Heavy wall, screw thread connection. Screw thread connector fits mm bore tubing.
186.56 AED
Joint Clip, Violet
For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.
31.62 AED
Joint Clip, Yellow
For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.
34.78 AED
Joint Clip, Blue
For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.
34.78 AED
Joint Clip, Green
For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.
27.67 AED
Organic Chemistry Set (Multi-Joint)
Ideal set for basic organic chemistry. 14/23 joint size. Set comprises: • Leibig Condenser • Air Leak Tube • Receiver Adapter • 100 mL Separating Funnel • 50 mL Round Bottom Flask • 100 mL Round Bottom Flask • 250 mL Round Bottom Flask • Reduction Adapter • Multiple Adapter • Receiver Adapter • Stillhead • 250 mL Conical Flask • Thermometer Pocket • Stoppers x 3
1573.10 AED
14/23 Single Joint Set ('BU/M Set'), Value Version
This set has been designed to cover the essential requirements for the teaching of organic chemistry in schools and colleges, and is difficult to beat for versatility. The set, made from borosilicate glass, comprise nine items of glassware housed in foam insert within cardboard box. Items included are: • Air Leak/Steam Inlet tube • Still Head • 50 mL Dropping Funnel • Screw thread Adapter • 50 mL Pear Shaped Flask • Receiver Adapter • Liebig Condenser • Stopper • Thermometer
513.83 AED
14/23 Single Joint Set ('BU/M Set'), Standard Version
This set has been designed to cover the essential requirements for the teaching of organic chemistry in schools and colleges, and is difficult to beat for versatility. The set, made from borosilicate glass, comprise nine items of glassware housed in polystyrene insert within Gratnells tray. Items included are: • Air Leak/Steam Inlet tube • Still Head • 50 mL Dropping Funnel • Screw thread Adapter • 50 mL Pear Shaped Flask • Receiver Adapter • Liebig Condenser • Stopper • Thermometer
1302.00 AED
Micro Scale Kit
The Quickfit® Microscale Chemistry Kit was designed to perform organic chemistry experiments, but on much smaller scale. This reduces your cost of everything involved, smaller amounts of reagents, lower disposal costs and less clamping equipment. Most standard organic chemistry sets may be performed using this set. The main benefits are: cheaper (reduced solvent costs), safer (smaller amounts of chemicals and no Bunsen burners required), quicker (reduced times for experiments), versatile (many assemblies can be constructed reflux, distillation, fractional distillation etc.) and easy to assemble (combination of standard Quickfit® ground glass joints and sealing 'O' rings and plastic screwcaps). Dimensions (L x W x D): 40 x 25 x 20 cm (unpacked). Contents: • Air condenser • Drying tube • Still head • Jacketed condenser • Thermometer adapter • 25 mL Pear shaped flask • 10 mL Pear shaped flask • Bag of spare caps, seals and 'O' rings • 25 mL Round bottom flask • 10 mL Round bottom flask • 10 mL Erlenmeyer flask • 25 mL Erlenmeyer flask • Receiver
1924.08 AED
Screw Thread Connector, Spare, for Quickfit Condenser
These screw thread connectors are for glassware with 13 mm screw thread inlets and outlets. They allow 9 mm bore rubber hose and flexible tubing to be attached to the glassware easily and safely.
53.75 AED
Screw Thread Connector, Spare, for Timstar Condenser
For Timstar 'Benchmark' Liebig Condensers.
32.41 AED
Receiver Adapter, Timstar, 14/23
Used to safely feed the distillate from condensers into the receiving vessels. (Short stem)
65.61 AED
Receiver Adapter, Timstar, 19/26
Used to safely feed the distillate from condensers into the receiving vessels. (Short stem)
67.98 AED
Receiver Adapter, Timstar, 14/23
Used to safely feed the distillate from condensers into the receiving vessels. (Long stem)
70.35 AED
Receiver Adapter, Timstar, 19/26
Used to safely feed the distillate from condensers into the receiving vessels. (Long stem)
73.12 AED
Receiver Adapter, Timstar, 24/29
Used to safely feed the distillate from condensers into the receiving vessels. (Long stem)
75.49 AED
Receiver Adapter, Quickfit, 14/23
Used to safely feed the distillate from condensers into the receiving vessels. Short stem.
186.56 AED
Receiver Adapter, Quickfit, 19/26
Used to safely feed the distillate from condensers into the receiving vessels. Short stem.
186.56 AED
Receiver Adapter, Quickfit, 14/23
Used to safely feed the distillate from condensers into the receiving vessel. Long stem.
212.64 AED
Receiver Adapter, Quickfit, 19/26
Used to safely feed the distillate from condensers into the receiving vessel. Long stem.
186.56 AED
Round Bottom Flask, Quickfit, 250 mL
Three necks. Short centre neck, two side necks at angle.
477.46 AED
Adapter, Quickfit, 14/23
Right-angled tubing adapter, fits 8 mm bore tubing. Detachable plastic screw thread.
162.45 AED
Volcanoes & Earthquakes Kit
Earth is constantly changing massive pieces of its outer layer are slowly sliding under, over, away from, or past each other. Earthquakes shake the continents and oceans, and volcanoes spew out the molten insides of our planet. By studying these awe-inspiring and devastating natural phenomena, you can learn more about the inner workings of Earth. A full-colour, 48-page experiment manual is included. • Build and erupt model volcano with plaster-based ""lava"" that hardens after each eruption. • Volcano can be erupted multiple times volcanic cone builds up with each eruption, like real volcano. • Learn about the different types of volcanoes. • Build working seismograph and simulate earthquakes to see how scientists measure earthquake forces. • Discover plate tectonics, and see how volcanoes and earthquakes are caused by the constant movement of the planet's parts. • Assemble plate tectonics puzzle and geological globe. Play volcano quiz game to learn about well-known volcanoes.
207.70 AED
Physical Globe
This gobe has striking cartography and features raised relief on the landmasses to give tactile indication of the location of the world's mountain ranges. It also uses raised relief to portray the ocean depths, revealing the trenches and mid ocean rises, which are important to the understanding of plate tectonics and oceanography. The ocean mapping also shows the direction of major currents, which is useful for an understanding of climatology and meteorology. • 300 mm diameter • Over 4000 place names and pieces of information • Suitable for advanced geographic study • Graduations on meridian help to work out lines of longitude latitude • Includes time dial to calculate different time zones • Available mounted on sturdy metal base and meridian or durable plastic base and meridian. • Assembled in the UK with recycled and recyclable materials, using traditional methods • Supplied with information booklet
293.00 AED
Multi Lamp & Switch Unit
This useful unit includes four low voltage lamp holders connected in parallel and mounted on BES type base. Individual switches control each lamp, allowing all, some, or none of the lamps to be lit. Four colour-coded 4 mm sockets can be used to link multiple sets together or to connect a power supply and Voltage and Current sensors or meters. Unit comprises: 4 On/Off toggle switches;4 x 4 mm sockets; 4 lamp holders supplied without bulbs, which are available separately. Suggested uses: • Use hand powered generator (EN98100) to feel the increase in power and energy needed to successively light more lamps. • Use with a battery or power supply to study the relationship between voltage, current and resistance. • Useful for studying power, efficiency, and Ohm's law in simple circuit. • Simple to use and quick to set up, as individual components do not need to be connected together to make circuit.
86.96 AED
BES Lamp Holder
For use in conjunction with the B.E.S or as stand-alone mounted components.
41.11 AED
BES Cell Holder
For use in conjunction with the B.E.S or as stand-alone mounted components.
36.36 AED
BES Push Switch
For use in conjunction with the B.E.S or as stand-alone mounted components.
37.94 AED
BES Toggle Switch
For use in conjunction with the B.E.S or as stand-alone mounted components.
38.73 AED
BES Changeover Switch
For use in conjunction with the B.E.S or as stand-alone mounted components.
38.73 AED
BES Reed Switch
For use in conjunction with the B.E.S or as stand-alone mounted components.
53.75 AED
BES Mounted LDR (Red)
For use in conjunction with the B.E.S or as stand-alone mounted components.
30.83 AED
BES Mounted LED (Green)
For use in conjunction with the B.E.S or as stand-alone mounted components.
30.83 AED
BES Component Holder
For use in conjunction with the B.E.S or as stand-alone mounted components.
31.62 AED
BES 10 Ohm Mounted Resistor
For use in conjunction with the B.E.S or as stand-alone mounted components.
22.13 AED
BES 50 Ohm Mounted Resistor
For use in conjunction with the B.E.S or as stand-alone mounted components.
22.13 AED
BES 82 Ohm Mounted Resistor
For use in conjunction with the B.E.S or as stand-alone mounted components.
22.13 AED
