Timstar - Science

A sturdy, compact pH meter which gives fast, accurate readings, displayed clearly on large LCD. The thin long-reach tube fits easily into test tube. Two-point calibration with automatic buffer recognition. Takes CR2032 cell (included). • Range: pH 0.00-14.00 • Resolution: 0.01 pH • Accuracy: ±0.2 pH • Battery life: 1000 hours • Dimensions: 71 x 50 x 21 mm (excluding probe) • Weight: 50 g

Replacement Electrode for PH180100

Compact, waterproof pocket meter with dual display showing pH and °C. • pH range 0.0-14.0 • Temperature range 0.0-60.0 °C • A.T.C. auto shut off (after mins) • Automatic or point calibration • Replaceable pH electrode • Dimensions (L x W x D): 163 x 40 x 26 mm

Replacement Electrode for pH Pocket Testers

This pocket pH meter is easy to use, giving fast, accurate and repeatable measurements of pH values. It has the unique feature of a retractable electrode. The LCD display has large digits making it easy to read and the protective cap allows the inclusion of a small sponge to keep the electrode moist to help prolong its life. Dimensions (L x W x D): 158 x 40 x 34 mm. • 0 to 14.0 pH 0.1pH (MPH-5011) • Impact-resistant ABS case • Splash-proof membrane keypad • Electrode can be extended up to 80 mm • Manual calibration via screw trim pot • Pocket clip moulded on the rear of the case • Supplied with electrode, protective cap, calibration screwdriver, 50 mL calibration solution and carry case • Powered by 9 V PP3 battery • Weight: 120 g • Warranty: 6 months

This pocket pH meter is easy to use, giving fast, accurate and repeatable measurements of pH values. It has the unique feature of a retractable electrode. The LCD display has large digits making it easy to read and the protective cap allows the inclusion of a small sponge to keep the electrode moist to help prolong its life. Dimensions (L x W x D): 158 x 40 x 34 mm. • 0 to 14.0 pH 0.01pH (MPH-5011A) • Impact-resistant ABS case • Splash-proof membrane keypad • Electrode can be extended up to 80 mm • Manual calibration via screw trim pot • Pocket clip moulded on the rear of the case • Supplied with electrode, protective cap, calibration screwdriver, 50 mL calibration solution and carry case • Powered by 9 V PP3 battery • Weight: 120 g • Warranty: 6 months

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

pH Electrode Cleaning Solution, 'Hanna'

Robust, double junction gel filled electrode with temperature range to 80°C. With free cleaning solution.

A high performance, single junction, refillable electrode with temperature range -5 to 100°C. With free cleaning solution.

pH Electrode Storage Solution, 'Hanna'

Conical (Erlenmeyer) Flasks - Timstar, 100/1

Conical (Erlenmeyer) Flasks - Timstar, 100/2

Conical (Erlenmeyer) Flasks - Timstar, 250/2

Conical (Erlenmeyer) Flasks - Timstar, 250/3

Conical (Erlenmeyer) Flasks - Quickfit, 50 mL.

Conical (Erlenmeyer) Flasks - Quickfit, 100 mL.

Conical (Erlenmeyer) Flasks - Quickfit, 500 mL.

Comprises Liebig condenser, still head and receiver adapter in single piece advantages include: Angle and position pre-defined; Simple to set up with fewer clamps required; Less grease contamination; No air leakage under vacuum; No liquid hold-up at the joints. Fits 8 mm bore tubing.

Pear shape.

Connectors fit 8 mm bore tubing.

125 mL dreschel bottle.

With socket and cone.

With socket and cone.

With socket and cone.

With socket and cone.

Expansion Adapter, Quickfit, 14/23, 19/26

Expansion Adapter, Quickfit, 14/23, 24/29

Heavy wall, screw thread connection. Screw thread connector fits mm bore tubing.

Heavy wall, screw thread connection. Screw thread connector fits mm bore tubing.

Vigreux type.

Dufton type.

Dufton type.

For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.

For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.

For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.

For jointed glassware. Will support full 1 L flask without using clamp at temperatures up to 50°C ambient and 80°C through the joint itself.

Ideal set for basic organic chemistry. 14/23 joint size. Set comprises: • Leibig Condenser • Air Leak Tube • Receiver Adapter • 100 mL Separating Funnel • 50 mL Round Bottom Flask • 100 mL Round Bottom Flask • 250 mL Round Bottom Flask • Reduction Adapter • Multiple Adapter • Receiver Adapter • Stillhead • 250 mL Conical Flask • Thermometer Pocket • Stoppers x 3

This set has been designed to cover the essential requirements for the teaching of organic chemistry in schools and colleges, and is difficult to beat for versatility. The set, made from borosilicate glass, comprise nine items of glassware housed in foam insert within cardboard box. Items included are: • Air Leak/Steam Inlet tube • Still Head • 50 mL Dropping Funnel • Screw thread Adapter • 50 mL Pear Shaped Flask • Receiver Adapter • Liebig Condenser • Stopper • Thermometer

This set has been designed to cover the essential requirements for the teaching of organic chemistry in schools and colleges, and is difficult to beat for versatility. The set, made from borosilicate glass, comprise nine items of glassware housed in polystyrene insert within Gratnells tray. Items included are: • Air Leak/Steam Inlet tube • Still Head • 50 mL Dropping Funnel • Screw thread Adapter • 50 mL Pear Shaped Flask • Receiver Adapter • Liebig Condenser • Stopper • Thermometer

The Quickfit® Microscale Chemistry Kit was designed to perform organic chemistry experiments, but on much smaller scale. This reduces your cost of everything involved, smaller amounts of reagents, lower disposal costs and less clamping equipment. Most standard organic chemistry sets may be performed using this set. The main benefits are: cheaper (reduced solvent costs), safer (smaller amounts of chemicals and no Bunsen burners required), quicker (reduced times for experiments), versatile (many assemblies can be constructed reflux, distillation, fractional distillation etc.) and easy to assemble (combination of standard Quickfit® ground glass joints and sealing 'O' rings and plastic screwcaps). Dimensions (L x W x D): 40 x 25 x 20 cm (unpacked). Contents: • Air condenser • Drying tube • Still head • Jacketed condenser • Thermometer adapter • 25 mL Pear shaped flask • 10 mL Pear shaped flask • Bag of spare caps, seals and 'O' rings • 25 mL Round bottom flask • 10 mL Round bottom flask • 10 mL Erlenmeyer flask • 25 mL Erlenmeyer flask • Receiver

Screwthread connectors fit 8 mm tubing.

Screwthread connectors fit 8 mm tubing.

Screwthread connectors fit 8 mm tubing.

Screwthread connectors fit 8 mm tubing.

These screw thread connectors are for glassware with 13 mm screw thread inlets and outlets. They allow 9 mm bore rubber hose and flexible tubing to be attached to the glassware easily and safely.

For Timstar 'Benchmark' Liebig Condensers.