Chemistry

Replacement Electrode for PH180100

Compact, waterproof pocket meter with dual display showing pH and °C. • pH range 0.0-14.0 • Temperature range 0.0-60.0 °C • A.T.C. auto shut off (after mins) • Automatic or point calibration • Replaceable pH electrode • Dimensions (L x W x D): 163 x 40 x 26 mm

Replacement Electrode for pH Pocket Testers

This pocket pH meter is easy to use, giving fast, accurate and repeatable measurements of pH values. It has the unique feature of a retractable electrode. The LCD display has large digits making it easy to read and the protective cap allows the inclusion of a small sponge to keep the electrode moist to help prolong its life. Dimensions (L x W x D): 158 x 40 x 34 mm. • 0 to 14.0 pH 0.1pH (MPH-5011) • Impact-resistant ABS case • Splash-proof membrane keypad • Electrode can be extended up to 80 mm • Manual calibration via screw trim pot • Pocket clip moulded on the rear of the case • Supplied with electrode, protective cap, calibration screwdriver, 50 mL calibration solution and carry case • Powered by 9 V PP3 battery • Weight: 120 g • Warranty: 6 months

This pocket pH meter is easy to use, giving fast, accurate and repeatable measurements of pH values. It has the unique feature of a retractable electrode. The LCD display has large digits making it easy to read and the protective cap allows the inclusion of a small sponge to keep the electrode moist to help prolong its life. Dimensions (L x W x D): 158 x 40 x 34 mm. • 0 to 14.0 pH 0.01pH (MPH-5011A) • Impact-resistant ABS case • Splash-proof membrane keypad • Electrode can be extended up to 80 mm • Manual calibration via screw trim pot • Pocket clip moulded on the rear of the case • Supplied with electrode, protective cap, calibration screwdriver, 50 mL calibration solution and carry case • Powered by 9 V PP3 battery • Weight: 120 g • Warranty: 6 months

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

These buffer solution capsules for use with pH electrodes are convenient and easy to use. Simply split the capsule in two and add to 100 mL of deionised/distilled water and mix. No minimum shelf life, so will keep for years!

pH Electrode Cleaning Solution, 'Hanna'

Robust, double junction gel filled electrode with temperature range to 80°C. With free cleaning solution.

A high performance, single junction, refillable electrode with temperature range -5 to 100°C. With free cleaning solution.

pH Electrode Storage Solution, 'Hanna'

Plastic bottles, air-tight with gromit to stop pH electrodes from drying out.

Luer fitting, interchangeable pistons and barrels.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Eight types available. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. ** please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Eight types available. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. ** please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Eight types available. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. ** please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Pre-bent rigid polypropylene delivery tubes. Unbreakable in normal use ideal substitutes for fragile glass alternatives. Suitable for many types of gas collection experiments. Supplied in pack of 5. The tubes have an i.d. of 4 mm, and an o.d. of 6 mm. please note these are not suitable for use at higher temperatures as this will distort the polypropylene.

Borosilicate glass, 6 mm o.d.

Borosilicate glass, 6 mm o.d.

This Mole Set contains samples of four different metals and helps students to visualise mole of substance in solid state, as well as developing better understanding of the concept of the mole, mass, molar mass, along with the differing properties of the various metals. The set contains four element specimens: copper, iron, zinc and aluminium, each containing approximately one mole (6.023 1023 atoms) of the element. Comparison of each sample, side-by-side, clearly shows that the same molar amount of different elements have different masses and occupy different volumes, due to each element having different atomic mass and density.

The FiveEasy F20 meter has a large, well-structured display, intuitive button arrangement and simple menu which ensures that measurements can be performed in just a few clicks. •Compact design saves space; Through its compact design and the ability to remove the sensor holder and store it on the side of the meter, little bench space is needed. •Simple and secure data transfer; The FiveEasy meter allows data to be exported either directly to a printer or a PC for further processing using RS232 or USB ports. •Range: pH 0.00 – 14.00 x 0.01 •Temperature range: 0 °C – 100 °C •3-point calibration •Supplied with a LM438 general pH sensor •Dimensions: 227 x 147 x 70 mm •Weight: 630 g •4.3” LCD display

This Melting Point Apparatus has been designed with safety in mind. A single control knob on the front panel incorporates the mains ON/OFF switch with arbitrary scale of 0 to 10. A rapid heat switch allows higher temperatures to be obtained quickly. Sample tubes are illuminated from behind and magnified through a lens. A selector at the rear of the instrument allows a light or dark background. Ceramic insulation around the aluminium heating block minimises heat transfer to the casing.

The 8000 pH meter features an easy to read, LCD display and is supplied with a budget pH electrode. The 8000 pH meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and an accuracy of ±0.05 pH. The pH readings are manually temperature compensated over the range of 0 to 60 °C (default 25 °C). The unit will power off automatically after ten minutes, maximising battery life. At the touch of a button, the instrument will automatically re-calibrate itself when used in conjunction with pH buffer solutions. Features: •Easy to use re-calibration feature •±0.05 pH accuracy •2 year guarantee on meter, 6 months on electrode •Operating Temperature 0ºC to 50ºC

Budget pH electrode. •Ideal for pH measurement of liquids and semi-solids •Ideal for laboratory applications •Ø12 x 120 mm •Temperature operating range 0 to 60°C

Earthenware.

Earthenware.

Glass with base and ground top flange.

Glass with base and ground top flange.

Glass with base and ground top flange.

Glass with base and ground top flange.

Glass with base and ground top flange.

Ground one side. Supplied in packs of 5.

Ground one side. Supplied in packs of 5.

Graduated 50 x 0.1ml. Closed at one end.

Circular pneumatic trough, made from clear soda-lime glass.

Circular pneumatic trough, made from clear soda-lime glass.

Circular pneumatic trough, made from clear soda-lime glass.

The head is fitted with 8 mm diameter inlet and outlet tubes.

Holder for glass gas syringes.

Ground glass syringe. Marked with 20 mL major graduations, and 1 mL minor graduations. Suba-Seal Stoppers ST14710 or ST14715 can be used as resealable stoppers. For video demonstration, visit timstar.co/SubaSealSyringe

Luer fitting, interchangeable pistons and barrels.

The MP-100 measures the melting point of chemicals from ambient to 250°C. Samples need to be placed in a sealed end capillary tube and located in the heating block. Up to three tubes can be tested at one time. The heating rate can be adjusted manually between 1 to 20°C/min, and for rapid heating 10°C/min, to obtain an accurate melting point range. The sample and melt process can be viewed via the magnifying lens, which is illuminated by bright LEDs. Record the melt temperatures from the thermometer, positioned horizontal to the samples to allow simultaneous viewing. The lens can be detached for cleaning and simple to follow instructions are printed directly on to the unit, making it easy for students to use. For 220/240V. Dimensions (L x W x H): 370 x 140 x 110 mm.

Spare thermometer, spirit filled, to 250 °C.

Designed with safety and ease of operation in mind making it ideal for use in education. Two samples can be tested simultaneously. Built-in illumination and viewing magnifying lens give clear viewing of samples. •Temperature range: Ambient to 300°C. •Three digit LED display. •Range rates: 20°C/min to plateau and 2°C/min to melt. •For 220/240V. •Dimensions (L x W x H): 160 x 220 x 170 mm.