Art & Crafts

Plastic hour and minute hands.

For large gears 500mm long x 4mm dia. Copper coated steel axle

Black plastic bracket for 2mm or 4mm dia. axles, can easily be drilled to larger sizes. Glue or screw to the chassis.

Medium Turned Birch wheels have a 4mm axle hole. One side is dished, the other flat. Tight fit on 5mm dowel.

Medium Density Fibreboard (MDF) wheels are 6mm thick with a 4mm nominal axle hole except D560-145 (75mm) which has a 5mm nominal axle hole.

5mm (3/16inch) dia. Pack of 100.

A pack of 80 cams in four different sizes, 4mm thick, which are a tight fit on 3mm rod. Extra holes enable them to be turned in to cranks. Supplied on the sprue, assorted colours.

High quality plastic propellers, tight fit onto a 2mm shaft (D560-204 fits 1mm ) 560-202 is a pusher propellor, the others are pullers. Packs of 10

The Sparmax ARISM Mini Kit includes: ARISM Mini Burgundy Red Compressor Sparmax MAX-4 Airbrush with 0.4mm nozzle and needle combination Sparmax Cleaning Pot with built in airbrush holder. The Sparmax ARISM Mini compressor embodies the philosophy of Sparmax: raising performance and rising above expectations through continuous improvement and unwavering quality. Reliable and functionally versatile, this innovative model exceeds the performance of similar sized compressors. The Sparmax ARISM Mini is a powerful and compact compressor; designed for workbench applications whilst saving the user space. As a smaller unit, it was also designed to be highly portable, for use on-the-go and easy to store. In keeping with it's compact nature, the Sparmax ARISM Mini also has a built-in airbrush holder on it's handle. This is the quintessential compact compressor for all ages and experience levels, and is available in 8 color options. Sparmax ARISM Mini Compressor (Cosmic Grey) The Sparmax ARISM Mini compressor features: Low maintenance, oil-less single piston air compressor Working pressure from 0 psi to 28 psi Manual on/off switch 2M Braided hose Pressure Adjuster Handle with built in airbrush holder Air flow: 12 - 14 lpm (0.42 - 0.49 cfm) at open flow 1/8 BSP outlet on compressor Size: L17.5 x W9 x H18.2 cm (5.6"""" x 3.5"""" x 6.6"""") Weight: 2.5 kgs (5.5 lbs) Voltage: 220-240V 50Hz Noise level: 49±dB Duty cycle: 30 minutes continuous use. After 30 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on. Airbrush: The Sparmax MAX-4 airbrush provides exceptional performance with even the smallest compressors because it atomises well at low pressures. It has a 0.4mm needle and nozzle combination for general purpose, high paint flow spraying and wider spray patterns. The 0.4mm nozzle is ideal when spraying thicker or heavier paints whilst still obtaining a fine level of detail. The Sparmax MAX-4 is a dual-action airbrush but can be easily converted to a Single-action airbrush with the Single-action Air Valve that is included. It also features a Pre-set Handle which limits the colour flow to avoid over-shooting and a Crown Cap allowing you to get closer to your work and thus achieve finer detail, whilst still protecting the needle. The Sparmax MAX-4 airbrush features: Gravity-feed with 1/4 oz (7ml) fixed cup with lid Dual-action airbrush with Single-action valve included Ð converts the airbrush from a dual-action to a single-action airbrush (simple installation guide included) Internal-mix 0.4mm needle and nozzle combination for high performance, general purpose, high paint flow spraying and wider spray patterns 0.4mm nozzle suitable for thicker or heavier paints Fine detail to 1"""" (0.4mm to 25mm) spray pattern with the one size nozzle Ergonomic handle design with a Pre-set colour flow control Extra Crown Cap included Cleaning brush included Replaceable internal PTFE solvent-proof needle packing for use with solvent-based paints 2 Year Warranty ""

Mobile three tier storage on heavy duty castors with two front locking. Provides 72 spaces on three levels.

Reel of 100m black waxed thonging

Medium Turned Birch wheels have a 4mm axle hole. One side is dished, the other flat. Tight fit on 5mm dowel.

This economical rack has 24 x 50mm spaces for A2 or A3 folders on each shelf. Two or three tier models are available as static OR mobile with feet or castors - customer to specify. (HxWxD) 1950 x 1500 x 580mm.

Black wheels and tyres moulded in PVC. Small sizes are car type, the larger are tractor/lorry type.

Solid birch turned balls. Packs of 10.

These set squares are made from clear tinted plastic with bevelled edges. Staedtler set squares are graduated in mm on one side and figured every 10mm in cms.

These set squares are made from clear tinted plastic with bevelled edges. Staedtler set squares are graduated in mm on one side and figured every 10mm in cms.

Supplied in a plastic wallet with a spare lead. It has a fixed point friction head compass for circles from about 3 to 340mm dia. Height: 128mm.

Semi-circular and full circle protractors made from polystyrene with bevelled edge and 1° graduations.

A3 drawing board carry case made from 3mm corriflute with carrying handle and case clips. Dimensions: 510 x 390 x 50mm. This carry case is suitable for 580-604 only. Case supplied flat packed for easy assembly.

Designed to store Walton A2 and A3 size drawing boards. The large size will store 20 Harlestons or 30 Starstons. Smaller size will store 10 Harlestons or 15 Starstons. Lock fitted as standard. Dimensions: 1202mm W x 418mm D x 840mm H

Erasers for the removal of lead from paper and film.

Cotton base, white, approx. 125g reel.

These polypropylene wheels are 50mm wide, with 4mm axle hole. in a pack of 100 wheels. Individual bags contain one colour.

Modern design of compass featuring large easy grip bow-top, self-centring mechanism and unique safety point. 3 colour assortment. Pack of 25.

These set squares are made from clear tinted plastic with bevelled edges. Staedtler set squares are graduated in mm on one side and figured every 10mm in cms.

High-quality nickel-plated steel split rings. Packs of 100.

Supplied with black hour/minute hands (950-395) & red second hands (950-396). Spindle length: 12mm. Pack of 10.

High-quality nickel-plated steel split rings. Packs of 100.

Supplied with black hour/minute hands (950-395) & red second hands (950-396). Spindle length: 12mm. Pack of 10.

Makes 10 kites Use symmetry, measurements and templates to draw the sail shape. Cut out the sail and cut the spars and rigging to length. Colourmate plastic sail, fibreglass spars. Includes all kite parts, handles and line. For Key Stage 3-4, ages 11+ Wingspan 70 cm

Charcoal filter for A200H fume extractor.

Firing capacity: 135 litres (4.77 cu ft). Maximum Temperature: 1320°C Chamber dimensions mm: 420 wide x 480 deep x 680 high External dimensions mm:;730 wide x 940 deep x 1560 high Weight: 270kg Power: 7.5 kW Supply required: Single Phase-40 amps or 3 phase-15amps per phase Installation Note: Please be aware that although we need to specify a 16 Amp three phase supply, the commando socket needs to be a 32amp socket as it is dimensionally bigger. The 910-007 plug is five pin (ThreePhaseNeutral+Earth).

The Gladstone E range of pugmills has been specifically designed for the studio and classroom environment. These machines being both compact and lightweight make them easily transportable. The G49E is fitted with a hopper safety grid and thermal overload safety switch as standard. Available in single or 3 phase. Specification: Extrusion outlet: 500mm dia Clay output: 190 - 200kg of clay per hour (approx) Dimensions (HxWxD) : 470 x 280 x 800mm Weight: 36.5kg

Contains 3 particulate filters and charcoal filter.

Polymorph has all the characteristics of a tough engineering material yet it fuses and becomes easily mouldable at just 62°C. It can be heated with just hot water or a hairdryer and moulded by hand to create prototypes, vacuum forming moulds, models etc.

This kit is supplied with a Mug Press, no oven required. • A4 Virtuoso SG400 Printer • 4 x Sublijet Virtuoso HD Standard Cartridge, Black 42ml, Cyan, Yellow, Magenta 29ml • Free download of Power Driver software • 1 pack of sublimation paper • 36 x Durham Sublimation Mugs • 1 x 30m roll of heat tape

This heavy duty A3 laminator features a double heating system utilising a hot roller and plate, providing high quality lamination. It also features clear instructions on the front of the product and a digital display for precise settings. With an operating speed of 465mm per minute, this product also features an anti-jam reverse function, helping to keep your workstation running smoothly.

For use with your RICOH SG 3110DN

Black Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 42ml

Cyan Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Magenta Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Yellow Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 29ml

Black Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 75ml

Cyan Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Yellow Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Magenta Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Contains: • A4 Virtuoso SG500 Printer for Sublimation • 4 x Sublijet Virtuoso HD Standard Cartridge, Black 42ml, Cyan, Yellow, Magenta 29ml • Adkins HPD A4 Clam Heat Press • 2 packs of sublimation paper • 2 x rolls of Heat Tape The included True Pix paper is suitable for all standard sublimation printables, if you wish to sublimate onto soft plastic sheets such as the special vacuum forming sheets, please use the special sublimation paper available separately (535-114 & 535-115).

Sublijet Virtuoso HD Standard Cartridge 42ml Black

Sublijet Virtuoso HD Standard Cartridge 29ml Cyan