Art & Crafts

Plastic 57mm diameter impeller with 4 blades, suitable for use with all miniature DC motors with a 2mm shaft.

These models provide an even illumination over the whole viewing area by use of cool white fluorescent tubes mounted below a perspex diffuser and protected by a toughened glass working surface. The small louvres on all sides ensure natural air flow. Operating voltage 230v AC. • Aluminium construction coated with grey tough epoxy paint. • Perspex diffuser screen mounted below toughened glass. • Louvres on all sides to ensure natural air flow. • Size: A3

These models provide an even illumination over the whole viewing area by use of cool white fluorescent tubes mounted below a perspex diffuser and protected by a toughened glass working surface. The small louvres on all sides ensure natural air flow. Operating voltage 230v AC. • Aluminium construction coated with grey tough epoxy paint. • Perspex diffuser screen mounted below toughened glass. • Louvres on all sides to ensure natural air flow. • Size: A2

Pack of 100 A3 gloss laminating pouches.

Every mask could be different even though all are based on the same mould. Great for drama events, Halloween, puppets, publicity, etc. Overall size of mask 240 x 155 x 85mm deep.

Great for example teaching aids, puzzles, games, space vehicles, electronic gizmos, display cases etc. The mould consists of two parts, a base unit which can house inserts to the students own design, and the dome mould. From these two moulds three mouldings are produced in only two operations, which when used with the overlay technique developed at Full instructions are provided. Overall size 165mm . Comes on two baseboards for the 1210.

Automatic pencil with eraser. 0.5mm HB lead.

12 Assorted large artists brushes.

A tub of 150 individually wrapped colour coded needles for Tapestry/Crewel (cross stitch), Embroidery/Chenille, includes 5 needle threaders.

Cut length 9405mm 37"" x 1.5mm (A1+ size) • Genuine 20 sheet capacity • Self sharpening tungsten steel blades • Unbreakable head and frame • A size indicators • 5 years guarantee • Cut control plate eliminates overloading

Set of 15 assorted flat and round artists' brushes.

Contains one each of Cad Yellow, Cad Red, Ultramarine, Emerald, Titanium White & Mars Black.

A bag of 20 x 100m bobbins of polyester thread including 3 Black, 3 White & 14 assorted colours.

Pack of 100 sheets.

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent.

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent. Size 300 x 225mm

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent. Size 300 x 225mm.

Cut length 480mm 19"" x 2mm (A3+ size) The MasterCut MCA3 has been specifically designed to offer a Premium Quality cutting machine, without the Premium. By utilising many of the components used in the highly regarded Professional M Series the MasterCut range offers Rotatrim quality at a similar price point to many lower quality trimmers. The patented Overload Protection system ensures that it is virtually impossible to overload the machine, even by the most heavy-handed of users, and ensures that the cut is always made in the correct direction*. Designed specifically for amateur and semi-pro photographers, office presentation and classroom use, the MasterCut range is the perfect machine for accurate, consistent quality finishing, where robustness and affordability are key requirements. • Cut control plate eliminates overloading • Highly robust and reliable construction. • Solid laminated MDF gridded baseboard, allowing accurate placement of work. • Clear, self-clamping strip secures the work in place, while offering a clear view of the cut. • Precision side rule and cursor, allowing accurate 90° and measured cuts. • Single square chrome-plated steel guide rail that is highly resistant to cutting head swivel. • Virtually maintenance-free, self-sharpening blades ensure a low cost of ownership and ease of use. • Complete Confidence - Rotatrim 5 Year Guarantee. • Cut Length: 480mm, 19in • Size Guide: A3+ • Overall Length: 665mm • Cut Capacity: 2.0mm

Walleted set of four - line widths of 0.1, 0.3, 0.5 & 0.7mm.

These value packs are ideal for classroom use. 24 each of Black, Red, Blue, Yellow, Green, Orange, Brown, Purple, Light Blue, Grey, Light Green, Pink.

Made in the UK without acid or chlorine, it's environmentally friendly and FSC certified. Size: A1 Weight: 220gsm Ideal for: Heavyweight drawing paper, printmaking, watercolour, acrylics. Similar to card stock or light poster board.

• Cone driven • Low maintenance wheel • Reliable mechanism • Ideal for large pots • Forward and reverse switch • 1/2hp motor • Aluminium wheelhead • Weight 40Kg

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1000°C External dimensions HxWxD: 250 x 200 x 210mm. Internal dimensions HxWxD: 130 x 120 x 70mm. 0.9KW Weight: 4.5kg Supplied with a batt (ceramic shelf)

Fibre glass clay bin. Holds up to 250kg of clay.

Keep your clay stored safely and usable for longer. Height - 1220mm Width - 920mm Depth - 640mm

• Easy to retro-fit to kilns without controls • Ideal for enamelling & jewellery • Single program • Heats at full power then soaks • Soak temperature & soak time can be reviewed or altered while firing • Delayed start facility • Power failure recovery • Selectable thermocouple types • Extensive kiln safety monitoring with alarm buzzer

The Gladstone Bailey wheel offers the studio and professional potter a wheel of unparalleled performance and versatility in a compact and user friendly design. The Bailey wheel has been designed to complement a European style of throwing with the wheel head set at a greater height than most wheels of this style allowing a more comfortable throwing position. The wheel powered by a super smooth 1/2 Hp drive that is controlled by a computer enhanced VF drive that due to its unique design can generate up to the peak equivalent of 1 Hp under heavy loads this enables the wheel to give constant smooth power throughout the speed range and is extremely quiet in operation. This wheel meets all current CE requirements and BSEN standards for electrical and mechanical safety. Technical Data Motor 0.37Kw (1/2Hp) AC industrial constant rated motor Operation Remote pedal speed control operation Speed 0 - 280 rpm Wheel Head 12"" dia Aluminium Alloy Splash Tray Large Capacity Moulded Plastic Width 470 mm approximately Height 680 mm approximately Length 630 mm approximately Weight approximately 37 Kgs Centering Weight 25 Kg of Clay Construction of Cabinet Precision laser steel chassis with powder coated finish

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 380 x 260 x 300mm Internal dimensions HxWxD: 200 x 160 x 90mm 1.2kW Weight: 8kg Supplied with a batt (ceramic shelf) We strongly recommend the enamelling kilns are used with a controller/programmer to prevent over-firing.

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 410 x 300 x 320mm Internal dimensions HxWxD: 230 x 190 x 120mm 2KW Weight: 14.5kg Supplied with a batt (ceramic shelf)

Front Loader Auto Damper & Heat Lock

The Pyro-Master tool has been designed to give excellent results when working with wood or leather. You can create pictures, decorate eggcups, key-rings, brooches, and name plates. Almost any wood or leather object can be personalised in this way. I's supplied with 10 branding tips, and 9 different drawing or shading tips, each tip will give you different results. A leather bookmark, leather fridge magnet, wooden keyring, and a wooden trinket box are also supplied with the kit. The iron is 25W with a PVC cable.

Quality scissors guaranteed for materials and workmanship.

Kiln furniture set (P5841)

Wedging bench with a soft wood frame sanded and polished to a high finish and a 20 mm Formica top. HxWxD: 760mm x 1200mm x 860mm Approximate weight: 50kg

Designed to meet the needs of the busy studio where both space and finance is limited. The compact Pugmill has an exceptional output for a machine of this size. An electronic overload starter and stop button is fitted as standard.

• Type R thermocouples fitted as standard on UK kilns • Adjustable clasp door locks fitted • Stainlesssteel surround • Brick to brick door seal • All kilns are fitted with a Harting socket for easy controller connection • Mains power indicator • Wired for singleor three phase connection • Roof and door vent asstandard for ventingof the kiln during firing and to aid cooling • Energy efficient • Furniture set available

Economy clock movement mechanism with integral hanger, fixing hardware and push fit hands. Designed to fit a 10mm diameter hole, maximum material thickness 8mm. Requires 1xAA battery.

Portable stands constructed of melamine faced MDF sized to fit our extraction units footprint. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. (HxWxD) 600 x 680 x 530mm.

Portable stands constructed of melamine faced MDF, to fit our extraction units. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. Illustration shows portable stand with ducted extractor. (HxWxD) 740 x 960 x 700mm.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applyingaerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A2 (model A200H) or A1 (model A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A2 size drawings/boards.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applying aerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A1 drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A1 size drawings/boards.

Chrome plated axle caps to retain wheels on axles.

Charcoal filter for A100H & A200S fume extractor.

Contains 3 particulate filters and charcoal filter.

Rubber bands in 450g boxes. Individual sizes and assorted.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Plastic second hands 65mm.

The air is exhausted at the rear of the cabinet via 100mm flexible ducting to the outside through a wall or window. A carbon filter is not fitted. Accommodates A1 size drawings/boards.

These clear plastic syringes are ideal for miniature pneumatic or hydraulic projects. They are graduated every 0.1ml and can be interconnected with the 1/8inch bore tubing and connectors