TSL - Technology

Kiln furniture set (P5841)

Wedging bench with a soft wood frame sanded and polished to a high finish and a 20 mm Formica top. HxWxD: 760mm x 1200mm x 860mm Approximate weight: 50kg

Designed to meet the needs of the busy studio where both space and finance is limited. The compact Pugmill has an exceptional output for a machine of this size. An electronic overload starter and stop button is fitted as standard.

• Type R thermocouples fitted as standard on UK kilns • Adjustable clasp door locks fitted • Stainlesssteel surround • Brick to brick door seal • All kilns are fitted with a Harting socket for easy controller connection • Mains power indicator • Wired for singleor three phase connection • Roof and door vent asstandard for ventingof the kiln during firing and to aid cooling • Energy efficient • Furniture set available

Economy clock movement mechanism with integral hanger, fixing hardware and push fit hands. Designed to fit a 10mm diameter hole, maximum material thickness 8mm. Requires 1xAA battery.

Portable stands constructed of melamine faced MDF sized to fit our extraction units footprint. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. (HxWxD) 600 x 680 x 530mm.

Portable stands constructed of melamine faced MDF, to fit our extraction units. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. Illustration shows portable stand with ducted extractor. (HxWxD) 740 x 960 x 700mm.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applyingaerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A2 (model A200H) or A1 (model A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A2 size drawings/boards.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applying aerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A1 drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A1 size drawings/boards.

Chrome plated axle caps to retain wheels on axles.

Charcoal filter for A100H & A200S fume extractor.

Contains 3 particulate filters and charcoal filter.

Rubber bands in 450g boxes. Individual sizes and assorted.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Standard brushes are a better quality and are sold singly. Economy brushes are mixed bristle, and are sold in dozens.

Plastic second hands 65mm.

The air is exhausted at the rear of the cabinet via 100mm flexible ducting to the outside through a wall or window. A carbon filter is not fitted. Accommodates A1 size drawings/boards.

These clear plastic syringes are ideal for miniature pneumatic or hydraulic projects. They are graduated every 0.1ml and can be interconnected with the 1/8inch bore tubing and connectors

Plastic hour and minute hands.

For large gears 500mm long x 4mm dia. Copper coated steel axle

Black plastic bracket for 2mm or 4mm dia. axles, can easily be drilled to larger sizes. Glue or screw to the chassis.

Medium Turned Birch wheels have a 4mm axle hole. One side is dished, the other flat. Tight fit on 5mm dowel.

Medium Density Fibreboard (MDF) wheels are 6mm thick with a 4mm nominal axle hole except D560-145 (75mm) which has a 5mm nominal axle hole.

5mm (3/16inch) dia. Pack of 100.

A pack of 80 cams in four different sizes, 4mm thick, which are a tight fit on 3mm rod. Extra holes enable them to be turned in to cranks. Supplied on the sprue, assorted colours.

Made from metal with 2 flywheels and 2 gears. With 3 fixing holes. Drive axle 105mm x 4mm.

High quality plastic propellers, tight fit onto a 2mm shaft (D560-204 fits 1mm ) 560-202 is a pusher propellor, the others are pullers. Packs of 10

The Sparmax ARISM Mini Kit includes: ARISM Mini Burgundy Red Compressor Sparmax MAX-4 Airbrush with 0.4mm nozzle and needle combination Sparmax Cleaning Pot with built in airbrush holder. The Sparmax ARISM Mini compressor embodies the philosophy of Sparmax: raising performance and rising above expectations through continuous improvement and unwavering quality. Reliable and functionally versatile, this innovative model exceeds the performance of similar sized compressors. The Sparmax ARISM Mini is a powerful and compact compressor; designed for workbench applications whilst saving the user space. As a smaller unit, it was also designed to be highly portable, for use on-the-go and easy to store. In keeping with it's compact nature, the Sparmax ARISM Mini also has a built-in airbrush holder on it's handle. This is the quintessential compact compressor for all ages and experience levels, and is available in 8 color options. Sparmax ARISM Mini Compressor (Cosmic Grey) The Sparmax ARISM Mini compressor features: Low maintenance, oil-less single piston air compressor Working pressure from 0 psi to 28 psi Manual on/off switch 2M Braided hose Pressure Adjuster Handle with built in airbrush holder Air flow: 12 - 14 lpm (0.42 - 0.49 cfm) at open flow 1/8 BSP outlet on compressor Size: L17.5 x W9 x H18.2 cm (5.6"""" x 3.5"""" x 6.6"""") Weight: 2.5 kgs (5.5 lbs) Voltage: 220-240V 50Hz Noise level: 49±dB Duty cycle: 30 minutes continuous use. After 30 minutes of continuous operation, use the On/Off Switch to turn off the unit. Allow the unit to cool for 10 - 15 minutes before turning the compressor back on. Airbrush: The Sparmax MAX-4 airbrush provides exceptional performance with even the smallest compressors because it atomises well at low pressures. It has a 0.4mm needle and nozzle combination for general purpose, high paint flow spraying and wider spray patterns. The 0.4mm nozzle is ideal when spraying thicker or heavier paints whilst still obtaining a fine level of detail. The Sparmax MAX-4 is a dual-action airbrush but can be easily converted to a Single-action airbrush with the Single-action Air Valve that is included. It also features a Pre-set Handle which limits the colour flow to avoid over-shooting and a Crown Cap allowing you to get closer to your work and thus achieve finer detail, whilst still protecting the needle. The Sparmax MAX-4 airbrush features: Gravity-feed with 1/4 oz (7ml) fixed cup with lid Dual-action airbrush with Single-action valve included Ð converts the airbrush from a dual-action to a single-action airbrush (simple installation guide included) Internal-mix 0.4mm needle and nozzle combination for high performance, general purpose, high paint flow spraying and wider spray patterns 0.4mm nozzle suitable for thicker or heavier paints Fine detail to 1"""" (0.4mm to 25mm) spray pattern with the one size nozzle Ergonomic handle design with a Pre-set colour flow control Extra Crown Cap included Cleaning brush included Replaceable internal PTFE solvent-proof needle packing for use with solvent-based paints 2 Year Warranty ""

Mobile three tier storage on heavy duty castors with two front locking. Provides 72 spaces on three levels.

Reel of 100m black waxed thonging

Medium Turned Birch wheels have a 4mm axle hole. One side is dished, the other flat. Tight fit on 5mm dowel.

This economical rack has 24 x 50mm spaces for A2 or A3 folders on each shelf. Two or three tier models are available as static OR mobile with feet or castors - customer to specify. (HxWxD) 1950 x 1500 x 580mm.

Black wheels and tyres moulded in PVC. Small sizes are car type, the larger are tractor/lorry type.

Solid birch turned balls. Packs of 10.

These set squares are made from clear tinted plastic with bevelled edges. Staedtler set squares are graduated in mm on one side and figured every 10mm in cms.

These set squares are made from clear tinted plastic with bevelled edges. Staedtler set squares are graduated in mm on one side and figured every 10mm in cms.

Supplied in a plastic wallet with a spare lead. It has a fixed point friction head compass for circles from about 3 to 340mm dia. Height: 128mm.

Semi-circular and full circle protractors made from polystyrene with bevelled edge and 1° graduations.

A3 drawing board carry case made from 3mm corriflute with carrying handle and case clips. Dimensions: 510 x 390 x 50mm. This carry case is suitable for 580-604 only. Case supplied flat packed for easy assembly.

Designed to store Walton A2 and A3 size drawing boards. The large size will store 20 Harlestons or 30 Starstons. Smaller size will store 10 Harlestons or 15 Starstons. Lock fitted as standard. Dimensions: 1202mm W x 418mm D x 840mm H

Erasers for the removal of lead from paper and film.

Cotton base, white, approx. 125g reel.

These polypropylene wheels are 50mm wide, with 4mm axle hole. in a pack of 100 wheels. Individual bags contain one colour.

Modern design of compass featuring large easy grip bow-top, self-centring mechanism and unique safety point. 3 colour assortment. Pack of 25.

These set squares are made from clear tinted plastic with bevelled edges. Staedtler set squares are graduated in mm on one side and figured every 10mm in cms.

British made 4mm stackable plugs. A 4mm socket is incorporated in the rear for in line stacking. Screw connection for wire. Rated 10A.

LED CLIPS Packs of 10 - 5mm clip single part.

Standard commercial quality 12 way terminal blocks. Polythene construction, easily subdivided, rated 380 V rms.

British made 4mm stackable plugs. A 4mm socket is incorporated in the rear for in line stacking. Screw connection for wire. Rated 10A.

Suitable for normal industrial and professional applications. Base laminate conforms to all international standards and releases, as lisited in IPC4101A. RoHS compliant. Specifications Thickness:1.6mm Copper foil:35 micron Dissipation factor:35 Dielectric constant:5.4 Solderbath resistance (260°C): 20 secs Resist thickness:5 microns Spectral response:350-450nm, typical 2-3 minute exposure UV light energy required:Approx. 50mJ/cm Shelf life:1 year at 15-20°C