TSL - Technology

A model/test bench To test and understand basic construction principles • How are buildings and structures built? • What are the characteristics of buildings? • Why don't buildings fall down? The concrete block test bench allows students to work on basic construction principles using stacked blocks.

Bridges Test Stand This kit enables students to compare different types of bridges. Students will assemble and test various systems and observe the characteristics of each bridge struture. Comes boxed as a self assembly kit Dimensions: H 250mm x L 520mm Truck for the Bridge test stand can be purchased. 560-776 Truck (300g)

Dragster kit that works with solar energy. The solar cell is 60 x 60mm. Dimensions: L 150 x W 60 x H 95mm. The kit involves a variety of skills across the curriculum including cutting, drilling, wiring, assembly. Includes all parts and materials required: • Solar cell • Solar motor • Mechanical parts • Chassis and cover pre-cut to dimensions This kit enables you to make ten Solar Dragsters.

Dual Fuel Dragster has a switch to select the source of energy, either battery or solar cell. The lightness of the vehicle and the great sensitivity of solar propulsion engine, works even under hazy sunshine. • Features steerable front wheels • Dimensions: L 210 x W 80 x H 70mm • Weight: 70g This kit enables you to make one Solar Dragster.

Low cost batteries with a shelf life of 2 years, suitable for low drain applications. Sold singly.

Low cost batteries with a shelf life of 2 years, suitable for low drain applications. Pack of 2.

A range of low-cost wirewound controls, ideal for loudspeaker volume controls, miniature motor speed controllers, etc. Rated at 5 watts. Body Diameter: 24mm, Body Depth: 11mm, Spindle Diameter: 6mm, Spindle Length: 6.5mm (17 inc bush)

Lens ended MES bulb 2.2V 250mA.

These batteries have a 7 year shelf life and are suitable for highh drain rate applications. They have a better low temperature performance than Zinc cells. Pack of 2.

250g reel of uninsulated Bare Copper Wire Dia. 1.626mm

These batteries have a 7 year shelf life and are suitable for high drain rate applications. They have a better low temperature performance than Zinc cells. Sold singly.

These batteries have a 7 year shelf life and are suitable for high drain rate applications. They have a better low temperature performance than Zinc cells. Pack of 2

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

Presented in a Gratnells tray for easy storage, this Gluestick pack is excellent value. With this pack, you will receive 72 premium, non-toxic, acid and solvent-free gluesticks perfect for use by children in the classroom. What's better, with an ultra-high standard PVP formula, these gluesticks have a shelf-life three times longer than a standard PVA gluestick, so you don't have to worry about them drying out! • Premium retractable medium gluesticks presented in a handy Gratnells classtray • Made from an ultra high-quality PVP formula • Gluesticks are non-toxic, acid-free, solvent-free and completely washable • Ideal for sticking paper, card or photos, and for use in arts and crafts • PVP formula allows for an approximately 3 times longer shelf-life than a standard PVA gluestick!

All-purpose clear oval low temperature glue sticks that only fit the Princess low temperature glue gun. Type: Low temperature Length: 100mm Pack size: 1250 Weight: 10kg

Coloured general purpose adhesive, 200mm in length, 12mm dia. This length of stick can easily be cut with snips or knife to the length required. Sold in packs of 10 assorted colours. For high temperature glue guns.

The dispenser prevents spills, fumes and contamination. Light pressure of a brush on the dispensing dish instantly pumps the desired amount of solvent. Made from stainless steel and polythene.

Aliphatic resin glue provides a strong initial tack and fast speed of set to reduce clamp time. Develops a bond stronger than the wood itself. Excellent sandability and unaffected by finishes.

These Bostik Glue Sticks can be used with the Craft Glue Gun and will bond most household materials instantly with a clean, economical and strong bond, making them ideal for household repairs, craft and hobby use. Sticks PVC, metal, fabric, leather, tiles, brick and much more Adhesive is colourless and odourless. Stick diameter 11mm Length of each stick is 190mm Supplied in 5kg pack.

Steel Metric Rolled Thread Zinc Plated.

Steel Metric Rolled Thread Zinc Plated.

Steel Nuts zinc plated pack of 100

Steel Nuts zinc plated pack of 100

Steel Metric Rolled Thread Zinc Plated.

Pack of 100 M4 diameter wing nuts.

12inch Diameter for D530-300 & other 12inch disc sanders.

12inch Diameter for D530-300 & other 12inch disc sanders.

Grit: 80 Size: 915 x 100mm

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

Aluminium Oxide paper discs with a self adhesive backing which will stick to most surfaces. 60 Grit - Packs of 10

Heavy duty belts for use on wood, plastics & fillers. Sold singly. Size - 1220 x 150mm

Clear general purpose adhesive. These 250mm sticks can easily be cut with snips or knife to the length required. Sold in 5kg box (containing approx. 198 sticks).

Fast setting, extra strong weatherproof wood adhesive for interior or exterior use Complies with EN 204 Type D3 -weatherproof, water resistant wood adhesive. Suitable for all types of wood Dries to a clear finish No mess, clog-free nozzle and twist to seal cap Ready to use glue for internal and external use.

High quality woodworking adhesive and medium made for us to BS4071. Dilute with water to the desired consistency, suitable for gluing a wide range of materials from wood to card and paper. It washes from clothes.

Standard Glue Sticks 300 pack of 12

Cyanoacrylate super glue that bonds instantly. It requires great care as it bonds skin instantly. Debonder is available (D110-277) The safety dispenser provides one-drop control. Does not drip or run. Ideal for vertical, overhead or hard to reach surfaces. Bonds in seconds

An economical water based contact adhesive with similar properties to Impact 2. Works well on Styrofoam.

A special low-temperature stick 250mm long, oval in section. It will only fit the low temperature glue gun. Sold in packs of 10 sticks.

Dimensions (HxWxD): 10.2 x 19.8 x 6.4mm. These include switch body and contacts but not roller and long lever.

• Cone driven • Low maintenance wheel • Reliable mechanism • Ideal for large pots • Forward and reverse switch • 1/2hp motor • Aluminium wheelhead • Weight 40Kg

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1000°C External dimensions HxWxD: 250 x 200 x 210mm. Internal dimensions HxWxD: 130 x 120 x 70mm. 0.9KW Weight: 4.5kg Supplied with a batt (ceramic shelf)

Fibre glass clay bin. Holds up to 250kg of clay.

Keep your clay stored safely and usable for longer. Height - 1220mm Width - 920mm Depth - 640mm

• Easy to retro-fit to kilns without controls • Ideal for enamelling & jewellery • Single program • Heats at full power then soaks • Soak temperature & soak time can be reviewed or altered while firing • Delayed start facility • Power failure recovery • Selectable thermocouple types • Extensive kiln safety monitoring with alarm buzzer

The Gladstone Bailey wheel offers the studio and professional potter a wheel of unparalleled performance and versatility in a compact and user friendly design. The Bailey wheel has been designed to complement a European style of throwing with the wheel head set at a greater height than most wheels of this style allowing a more comfortable throwing position. The wheel powered by a super smooth 1/2 Hp drive that is controlled by a computer enhanced VF drive that due to its unique design can generate up to the peak equivalent of 1 Hp under heavy loads this enables the wheel to give constant smooth power throughout the speed range and is extremely quiet in operation. This wheel meets all current CE requirements and BSEN standards for electrical and mechanical safety. Technical Data Motor 0.37Kw (1/2Hp) AC industrial constant rated motor Operation Remote pedal speed control operation Speed 0 - 280 rpm Wheel Head 12"" dia Aluminium Alloy Splash Tray Large Capacity Moulded Plastic Width 470 mm approximately Height 680 mm approximately Length 630 mm approximately Weight approximately 37 Kgs Centering Weight 25 Kg of Clay Construction of Cabinet Precision laser steel chassis with powder coated finish

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 380 x 260 x 300mm Internal dimensions HxWxD: 200 x 160 x 90mm 1.2kW Weight: 8kg Supplied with a batt (ceramic shelf) We strongly recommend the enamelling kilns are used with a controller/programmer to prevent over-firing.

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1100°C External dimensions HxWxD: 410 x 300 x 320mm Internal dimensions HxWxD: 230 x 190 x 120mm 2KW Weight: 14.5kg Supplied with a batt (ceramic shelf)

Front Loader Auto Damper & Heat Lock

The Pyro-Master tool has been designed to give excellent results when working with wood or leather. You can create pictures, decorate eggcups, key-rings, brooches, and name plates. Almost any wood or leather object can be personalised in this way. I's supplied with 10 branding tips, and 9 different drawing or shading tips, each tip will give you different results. A leather bookmark, leather fridge magnet, wooden keyring, and a wooden trinket box are also supplied with the kit. The iron is 25W with a PVC cable.

Quality scissors guaranteed for materials and workmanship.