TSL - Technology

Contains one each of Cad Yellow, Cad Red, Ultramarine, Emerald, Titanium White & Mars Black.

A bag of 20 x 100m bobbins of polyester thread including 3 Black, 3 White & 14 assorted colours.

Pack of 100 sheets.

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent.

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent. Size 300 x 225mm

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent. Size 300 x 225mm.

Cut length 480mm 19"" x 2mm (A3+ size) The MasterCut MCA3 has been specifically designed to offer a Premium Quality cutting machine, without the Premium. By utilising many of the components used in the highly regarded Professional M Series the MasterCut range offers Rotatrim quality at a similar price point to many lower quality trimmers. The patented Overload Protection system ensures that it is virtually impossible to overload the machine, even by the most heavy-handed of users, and ensures that the cut is always made in the correct direction*. Designed specifically for amateur and semi-pro photographers, office presentation and classroom use, the MasterCut range is the perfect machine for accurate, consistent quality finishing, where robustness and affordability are key requirements. • Cut control plate eliminates overloading • Highly robust and reliable construction. • Solid laminated MDF gridded baseboard, allowing accurate placement of work. • Clear, self-clamping strip secures the work in place, while offering a clear view of the cut. • Precision side rule and cursor, allowing accurate 90° and measured cuts. • Single square chrome-plated steel guide rail that is highly resistant to cutting head swivel. • Virtually maintenance-free, self-sharpening blades ensure a low cost of ownership and ease of use. • Complete Confidence - Rotatrim 5 Year Guarantee. • Cut Length: 480mm, 19in • Size Guide: A3+ • Overall Length: 665mm • Cut Capacity: 2.0mm

Walleted set of four - line widths of 0.1, 0.3, 0.5 & 0.7mm.

These value packs are ideal for classroom use. 24 each of Black, Red, Blue, Yellow, Green, Orange, Brown, Purple, Light Blue, Grey, Light Green, Pink.

Made in the UK without acid or chlorine, it's environmentally friendly and FSC certified. Size: A1 Weight: 220gsm Ideal for: Heavyweight drawing paper, printmaking, watercolour, acrylics. Similar to card stock or light poster board.

The model DS has double O ring washers for increased suction. Replaceable nozzle. Lightweight and easy to use.200mm long x 20mm dia.

60/40 Tin/Lead alloys with five cores of non corrosive flux. The 'Savbit' alloy will help prevent corrosion of copper soldering bits.

Spare sponge for ST4 & ST6 soldering iron stands.

Soldering Iron Element CS Iron 240v

The ST6A is an industrially styled bench stand for ANTEX M, C, CS, XS, TCS, TC & SD soldering irons. Ideal for use when a fume extraction tube is used. It is manufactured from high grade materials, suitable for use with soldering iron tip temperatures. It incorporates slip-resistant feet, and a ballast weight for added stability. The innovative design ensures that the soldering iron handle temperature is kept to a minimum when the iron is placed in the stand for long periods.

Supplied fitted with a 3 pin connector for connecting to appropriate service trunking or the Antex power supply (700-190).

60/40 Tin/Lead alloy with low fume, high purity halide free flux core. For use where a minimum of fume and residue are required. 500g reel.

This power supply unit plugs directly in to a standard13A mains socket. Maximum power rating 24W, suitable for use with the 24 volt versions of the Antex C, M, CS or XS irons.

Omega lead-free solder is the ultimate in environmental health management, manufactured in the U.K. from 96% tin, 3.5% silver and 0.5% copper. It is rosin-free, halidefree and has a flux content of 3%. and a melting point of 217 °C. 250g reels.

For general purpose welding and brazing.

Sifbronze No.1 brazing rod for general purpose use. Melting Temp: Between 875 - 895 ºC

• Nominal Power - 18 watts • Supplied with long-life iron plated bit • Antex 1100 bit is fitted to this iron (2.3mm) • An inner ceramic shaft provides near perfect insulation • Burn-proof silicone cable. Ideally suited to educational environments • Supplied complete with 2.3mm bit, 1.5m of cable and full instructions • CE marked Uses 1100 series replacement bits and a range of alternative sized bits are also available. Soldering iron stands are available separately.

Best quality. Sheet size 280 x 230mm. Grade: S2 coarse (40 grit). Note: Colour may vary.

Best quality. Sheet size 280 x 230mm. Grade: F2 100 grit. Note: Colour may vary.

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

Fast flow Hardcore Solder is a flux core contained within a high purity solder wire. It eliminates soldering defects, has no offensive odours and is an assured non-corrosive, no-clean solder. 500g reels.

Soldering Iron Tip for CS Iron 2.3 dia point

• Nominal Power - 25 watts • Supplied with long-life iron plated bit • Antex 50 bit is fitted to this iron (2.3mm) • An inner ceramic shaft provides near perfect insulation • Burn-proof silicone cable. Ideally suited to educational environments • Supplied complete with 2.3mm bit, 1.5m of cable and full instructions • CE marked Uses 50 series replacement bits and a range of alternative sized bits are also available. Soldering iron stands are available separately.

Contain a soldering iron, an ST6 stand and a length of solder. With Silicone Rubber cable, complete with fitted plug. 220/240 volt only.

Best quality. Sheet size 280 x 230mm. Grade oo very fine (240 grit). Note: Colour may vary

Best quality. Sheet size 280 x 230mm. Grade: O fine (220 grit). Note: Colour may vary.

Soldering Iron Tip for XS Iron 2.3 dia point

Helps to look after your soldering iron tip and can aid cleaning of an oxidised tip

Silver oxide batteries can be used in place of alkaline batteries i.e. LR44 = SR44

This specially designed E-Textiles coin cell holder has large connection points for the conductive thread. It also has an integrated in power switch.

Low cost miniature transistor oscillator buzzers with flying leads. Ideal for educational projects and general purpose use. Frequency: 400Hz Sound Output: 75dB @ 30cm. Current: 30mA Dims: 23L x 17W x 15H Fixing Centres: 27.5mm Lead Length: 100mm

Solid state. Sound output 75dB @ 30cm. Frequency 400Hz. Fixing centres 27.5m.

Current Rating 10A Voltage Rating 250V(ac) Length 3m Colour Black Overview C13 to BS1363 Economy 10A Power cords suitable for office and light use environments. The BS 1363/A 13A fused mains plug has a riveted/welded construction and is non-rewireable. Cable fully tested and approved by ASTA and strain relieved at both ends. Range Overview IEC to BS1363 Plugs A range of electrical appliance connecting leads, the majority of which are terminated with connectors that conform to IEC 60320. The IEC (International Electrotechnical Commission) is the international standards and conformity assessment body. The 'odd' 'C' numbers refer to a socket type connector - mains input - and the 'even' 'C' numbers refer to a plug type connector - the appliance inlet.

Ultra slim, pre-mounted e-textile LEDs run off a 3V coin cell battery and are illuminated continuously when powered. They have connections to which the conductive thread can be connected. These are clearly marked with '+' and '-' to indicate which is the positive and which is the negative connection.

Miniature low-cost toggle switches.

Economy stripboard for PCB work. Size: 25 x 64mm.

Mains Fuse 13 amp 240 volt

This sewable slide switch allows LEDs to be turned on or off in your E-Textiles project. It has 2 connection points to which the conductive thread is connected.

A red lead with stackable 4mm plug at each end, 500mm long, extra flexible wire. Max current 0.5A continue.

A black lead with stackable 4mm plug at each end, 500mm long, extra flexible wire. Max current 0.5A continue.

Solid state. Sound output 75dB @ 30cm. Frequency 400Hz. Fixing centres 27.5m.

A dragster kit that allows multiple choices for transmission and student development. It promotes a strong collective commitment to making and testing an identical chassis. The kit ensures students can create their own original dragsters. Features: - Belt driven with the option of 3 pulley diameters. - Choice of mounting the rear wheels of 4 different diameters. - Demountable wheel to highlight slip / traction. - Front axle configured in different ways to search for the best straight-line guidance. - Multiple configurations for the body cover, depending on student preference. Requires 3 AA batteries. Dimensions depending on configuration, expanded PVC frame 6 x 40 x 200 mm. Includes a variety of parts including wheels and pulleys of different diameters. Excludes the material for the body, allowing students to develop their own from a chosen material. Available as a single pack or a pack of 10. Batteries not included. This kit enables you to make up to 10 Dragsters.

PP3 size holder. PCB mounting - 2 terminals 0.8 dia. Pin spacing 12.7mm.

10 leads in 5 assorted colours, typically 457mm length, with PVC insulated miniature crocodile clips at each end. Max current 0.5A continuous. Pack of 10