TSL - Technology

A choice of bar type or precision adjustment hardened sliding jaw type.

The use of Trefolex will increase the life of taps and dies. It will also improve the quality of threads and reduce the effort required to cut them.

Circular die stock for 13/16inch O.D dies.

Fire Brick measuring 9 x 4.5 x 3inch

Mitre block 9inch long beech construction with accurate slots. RST.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

As a box pan folder, a unique feature of this model for forming box ends is the use of standard steel angle cut as required for work clamping rather than conventional segments. A narrow bed assures that return bends are made with the workpiece suspended insude the folder. • Interrupted folds • Return bends • Box ends • Brackets and channels • Scrolls and cylindrical shapes

Floor stand for Gabro BF620.

13/16inch O.D.

13/16inch O.D.

For Second or Plug Taps please add an S or P to the catalogue number. Taper Taps will be supplied unless otherwise requested.

13/16inch O.D.

Optional stand for the Puma 60 vinyl cutter. Supports the II, III and IV versions.

Fit most Hewlett Packard 7000 series plotters and Roland CAM1, DXY, DPX & GRX 300, 400 series and Bobcat, Puma, Lynx Bengal, and Jaguar Cutter/Plotters. Plastic-tipped disposable cartridges filled with water soluble, non-permanent ink for use on plotter paper and film.

Pack of 5 cutters for CAMM-1

Pre-Filter for the BOFA AD-400 extractor.

Combined filter for BOFA AD-400 extractor.

Tape is applied to face of vinyl using pressure by rubbing. Tape and selected vinyl is carefully peeled away from backing and placed onto material. Pressure by rubbing is applied over the tape. Tape is then peeled away leaving vinyl on material. Supplied in 100 metre rolls. Store application tape in a cool, dark place.

Lens Cleaner is specifically formulated (Alcohol, Ammonia and Detergent Free) to safely remove Finger Prints and Water/Oil based contamination from optical surfaces without streaking. Most Lens cleaning Solutions are alcohol based and Alcohol by itself is not suitable to remove stains/spots and always leave streaks behind. Use Lens Cleanâ„¢ with VisibleDust Ultra-Fine Micro fibre Cleaning Cloth or soft lint-free cloth. This 30ml size lens cleaner is small and portable.

Pre-Filter labyrinth F8/F9 for Purex 400i fume extractor

Replacement grid style cutting bed for Mercury & X252 Laser Cutters. Replace when your existing grid bed is heavily discoloured and dirty from general use.

Replacement auto focus probe for the following laser cutters: LaserPro Mercury LaserPro Explorer LaserPro X252 LaserPro Venus

Pack of 100 lint free lens cleaning papers for cleaning your Laser mirrors.

Pack of 100 cotton buds for Laser cleaning.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 6mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 9.5mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2362 x 9.5mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2362 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3429 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

This blade can be supplied in lengths up to 2743mm (9ft) and 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 3580 x 12mm (6tpi) 6tpi - skip teeth & are best for cutting timber

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 9.5mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2895 x 12mm (14tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2845 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

• High quality blades • Suitable for all general purpose cutting of wood, plastics and metal • High carbon steel with hard teeth & flexible back to ensure long cutting life 2895 x 12mm (10tpi) 10 & 14tpi - regular teeth, good for thin sections of timber and plastics

3675mm x 1/2inch (4tpi). For TS440.

This blade can be supplied in lengths between 2743mm - 3658mm (9-12ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

Selection of saw blades (60pcs) For wood, plastic and metal

Wood lathe extraction kit containing everything required to connect a wood lathe to our extraction system including scoop hood, frame assembly, ducting and fixings.

This blade can be supplied in lengths between 3656mm - 3962mm (12-13ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

This blade can be supplied in lengths between 3656mm - 3962mm (12-13ft) and 6, 10, 14 or 24 TPI. PLEASE SPECIFY YOUR REQUIRED LENGTH (in mm) AND TPI WHEN ORDERING. Because they are made to order they can take up to 2 weeks to supply.

• Fully hardened high carbon steel bit • Precision ground tri-point bit for a clean cut and reduced splintering • Sizes: 10, 16, 20, 22, 25 and 32mm bits • For drilling softwood, medium hardwood, particle board, plasterboard, plastics and fibreglass • For use with drills, drivers and hand braces Pack of 6.

Suitable for use in chip forges and chip brazing hearths. 12.5kg

• Machine Type - Medium /Bench or Pedestal • Method of attachment - Secures around depth stop collar using fixing top to suit configuration • Positive Manual latch • Flip up with spring retention • Construction - Aluminium/Nylon with Polycarbonate Vizor which encloses the work area • Operation - Telescopes on contact with work piece, length adjustable vizor Please state collar size when ordering. Maximum chuck dia. for the MT is 63mm / MTS is 70mm.

• Machine Type - Light/Bench or Pedestal • Method of attachment - secures to drilling machine spindle collar • Positive manual latch • Flip up with spring retention • Construction - moulded polycarbonate • Operation - Telescopes on contact with work piece, length adjustable vizor which encloses the work area Collar size: 62.5mm

Meddings drill guard to fit Meddings Driltru: L1 L2 M2 M4 & MV4. Clamp diameter for Drill guard 64mm.