Search
All Categories
    Menu Close

    TSL - Technology

    View as Grid List
    Sort by
    Display per page
    100-300.jpg

    Sanding Belt Grit 80 1090 x 150mm

    Heavy duty belts for use on wood, plastics & fillers. Sold singly. Size - 1090 x 150mm
    39.13 AED
    400-034.jpg

    Hardwood Dowel 600 x 10mm

    Quality Hardwood Dowel from sustainable sources. Pack of 10, 10mm diameter, 600mm long. Nominal size ± ½ mm.
    19.76 AED
    950-693.jpg

    Hardwood Dowel 600 x 6mm

    Quality Hardwood Dowel from sustainable sources. Pack of 10, 6mm diameter, 600mm long. Nominal size ± ½ mm.
    9.49 AED
    950-701.jpg

    Hardwood Block Pack

    Mainly Jelutong, a mild working close grained hardwood. Supplied in 600mm lengths. Block Pack - 52 pieces of round, rectangular and square blocks.
    323.31 AED
    400-065.jpg

    MDF Sheet 600 x 300 x 6mm (Contains Formaldehyde)

    Grade E1 low formaldehyde content. Less than or equal to 8mg to100g of product. Pack of 36 sheets. Approximate sheet size 60 x 300 x 6mm To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion. Not recommended for use on a laser cutter.
    743.07 AED
    400-064.jpg

    MDF Sheet 600 x 300 x 3mm (Contains Formaldehyde)

    Grade E1 low formaldehyde content. Less than or equal to 8mg to100g of product. Pack of 36 sheets. Approximate sheet size 610 x 300 x 3mm To reduce the risk of warping, MDF sheet should be stored flat in a dry, well ventilated area as it is susceptible to moisture absorpttion. Not recommended for use on a laser cutter.
    513.83 AED
    130-102-1-en_GB.jpg

    Mild Steel Rod 1500mm x 6mm

    Mild Steel Rod 6mm diameter, length 1500mm.
    11.86 AED
    385-577.jpg

    Classmaster Pencils HB Class

    • Super value bulk box of graphite pencils • Hexagonal polished barrels in standard size • Quality HB graphite lead
    290.90 AED
    190-303.jpg

    Retractable Craft Knife

    Retractable craft Knife Compatible blades: 190-320, 190-321 and 400-101.
    22.13 AED
    190-152.jpg

    Crown Wood Turning Tools (Set of Five)

    Contains 19mm roughing out gouge, 10mm spindle gouge, 6mm parting off tool, 13mm round nose scraper & 13mm skew chisel.
    1331.20 AED
    200-422.jpg

    Forstner Bit 7 piece Set

    Guided by the circular rim, bores any arc of a circle. Radial cutting edges, titanium-coated for extended life. Bores a true, flat-bottomed hole. Rapid removal of waste. Sizes 12, 16, 20, 22, 26, 30, 35mm.
    181.02 AED
    480-115-1-en_GB.jpg

    Panel Pins 20mm 1kg

    1kg 20mm Panel Pins
    65.61 AED
    110-201.jpg

    Evo-Stik PVA Wood Adhesive White 500ml

    It is easy to use, requiring only light cramping to get a good bond. Excess glue can be removed easily with a damp cloth and washes off fingers.
    41.11 AED
    110-204.jpg

    Evo-Stik PVA Wood Adhesive White 5 Litre

    It is easy to use, requiring only light cramping to get a good bond. Excess glue can be removed easily with a damp cloth and washes off fingers.
    320.10 AED
    590-092.jpg

    Face Shield EN1663B Compliant

    Eye Protection is a requirement under Regulation 4 of the Personal Protective Equipment At Work Regulation 1992 when at risk in a hazardous area. Schools must provide personal protective equipment that offers suitable protection to personnel who may be exposed to potential health risks. Many day to day tasks can generate flying debris which can seriously injure the eyes. From wood and paint chips to dirt, concrete particles and even nails, a worker's eyes are constantly and most often at risk from impact hazards. Face shields are a combination of a grey browguard and a polycarbonate 205mm visor. All our visors are rated to withstand medium impact EN1663B. And conform to EN166.1.B.3.9 Also suitable for hot metal areas
    120.95 AED
    590-031.jpg

    Sonis 1 – SNR 27

    Green - Low Attentuation Small Cup 80-107 dB • Moderate industrial noise • Workshops • Printing works • Landscaping • Leisure activities
    162.05 AED
    110-102.jpg

    Mini Glue Sticks 7mm x 100mm

    General purpose mini glue sticks suitable for the Bostik handy glue gun. Supplied in either a card of 15 x 100mm long or in 1 kilo bags which contain approximately 220 sticks 100mm long.
    151.90 AED
    670-012.jpg

    Machine Screws

    Machine screw selection of zinc-plated screws. Sizes: M3 x 8, M4 x 25, M5 x 20, M3 x 12, M3 x 20, M4 x 20, M4 x 40, M5 x 20, M5 x 50, M6 x 30 and M6 x 50.
    88.54 AED
    670-016.jpg

    Washers

    Sizes M3 x 0.5 x 7.0mm, M4 x 0.8 x 8.0mm, M5 x 1.0 x 10.0mm, M6 x 1.0 x 13.0mm, M8 x 1.0 x 16.0mm, M10 x 1.2 x 19.0mm, M12 x 1.6 x 23.0mm, M6 flexible, M8 flexible, M6 x 25 x 1.6mm and M8 x 32 x 1.6mm.
    90.12 AED
    670-015.jpg

    Hex Nuts

    Sizes M3, M4, M5, M6, M8, M10 and M12. 1000pce (approx).
    90.12 AED
    955-111.jpg

    Clock Movement With Hands 7mm Face Thickness

    Supplied with black hour/minute hands (950-395) & red second hands (950-396). Spindle length: 16mm. Pack of 10.
    244.10 AED
    700-103.jpg

    Lead Free Solder 22swg 250g

    Omega lead-free solder is the ultimate in environmental health management, manufactured in the U.K. from 96% tin, 3.5% silver and 0.5% copper. It is rosin-free, halidefree and has a flux content of 3%. A fast flow solder, with good solderability, minimal clear residue and a melting point of 217°C. 250g reels.
    425.29 AED
    580-307.jpg

    Helix Clear Shatter Resistant Ruler 300mm

    Clear Shatter Resistant Ruler 12inch/30cm
    8.70 AED
    550-109-1-en_GB.jpg

    Maun W-Shape Safety Rule 300mm

    Chrome plated 'W' shape safety rule. For safe cutting with a knife.
    30.04 AED
    490-051.jpg

    Cast Acrylic Sheet Opaque Blue 600 x 400 x 3mm

    Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.
    46.64 AED
    490-350.jpg

    PVC Foam Sheet White 1220 x 610 x 3mm

    PVC foam sheet can be sawn, drilled, milled, painted, printed, welded, thermo formed (especially line bent), screwed, riveted and glued with both solvent and contact adhesives. It is ideal for CNC machining. Please note, sheet sizes are nominal. Sheet size 1220 x 610 x 3mm This material is Not suitable for use on a laser cutter.
    74.31 AED
    390-262.jpg

    Junior Scissors Block and Scissors

    • Convenient wooden storage tidy • Complete with 32 pairs of children's ruler scissors • Blade ruled in centimetres/millimeters • 26 right-handed and 6 left-handed per set • Scissors: size 133mm (5.25"")
    135.97 AED
    380-372.jpg

    Rotatrim Mastercut MCA2 Trimmer

    Cut length 680mm 26.75"" x 2mm (A2+ size) • Genuine 20 sheet capacity • Self sharpening tungsten steel blades • Unbreakable head and frame • A size indicators • 5 years guarantee • Cut control plate eliminates overloading
    1037.93 AED
    210-169.jpg

    Quick Adjustable Band Clamp

    Sturdy plastic clamp, with durable 4m polyester strap & metal tightening screw.
    65.61 AED
    100-301.jpg

    Sanding Belt Grit 60 1090 x 150mm

    Heavy duty belts for use on wood, plastics & fillers. Sold singly. Size - 1090 x 150mm
    45.45 AED
    600-259.jpg

    Circular Saw Trimming Blade 315mm 80 teeth

    315mm Dia, 30mm bore, 14mm pinhole. For accurate sizing and trimming timber and manmade boards. Supplied with standard pinholes including Sedgwick and Scheppach.
    570.74 AED
    500-226.jpg

    Draper Venom Tenon Saw 250mm

    Manufactured from high quality 1mm carbon steel, that's been correctly hardened and tempered to ensure the blades strength and straightness while the double ground set of the saw tooth delivers a faster saw cutting performance with optimal sawdust removal in both forward & reverse motions. The finely ground handsaw blade is coated with an ultra-tough lacquer protecting the saws blade from corrosion, whilst easing friction when sawing. The blade is ultrasonically welded to a bespoke ergonomic soft grip handle with a ridge free finger support achieving precise cutting and user comfort, even when used for prolonged periods.
    49.41 AED
    400-029.jpg

    Hardwood Dowel 600 x 4mm

    Quality Hardwood Dowel from sustainable sources. Pack of 10, 4mm diameter, 600mm long. Nominal size ± ½ mm.
    47.43 AED
    480-181.jpg
    350-187.jpg

    Draper Engineers File 200mm Set of 3

    High carbon steel, hardened and tempered with soft grip handles incorporating hang hole.
    110.27 AED
    100-352.jpg

    Abrasive Belt Cleaner Stick

    Extends the life of sanding belts, discs and sheets, and removes clogging simply and efficiently. 150 x 25 x 25mm.
    16.60 AED
    910-106.jpg

    Key Ring Snake Leash

    Nickel plated. Pk/50
    83.00 AED
    950-740.jpg

    Key Rings 25mm Diameter

    High-quality nickel-plated steel split rings. Packs of 100.
    67.19 AED
    250-391.jpg

    Solid Core Wire Red

    soLID core - Rated: 1.8A @ 1000V RMS max. size 1/0.6mm. 100 metre reel
    86.16 AED
    700-148.jpg

    Soldering Iron Stands

    For all Antex and most other brands of soldering iron. This stand is adjustable for the model of iron used. It is made from high grade phenolic, has slip resistant feet, and a ballast weight for stability.
    55.34 AED
    120-116.jpg

    Lead Free Pewter Stick 1kg

    With a melting point of 240°C, this is an ideal material for teachers to demonstrate casting techniques and processes to make highly detailed items such as jewellery, tankards, coasters, place mats, trays etc. Being non-toxic and totally re-useable it is an ideal material for schools. *The weight of one stick is approx 1kg Alloy conforms to BS EN 611-1:1996 Alloy 3 Lead Free Pewter.
    324.11 AED
    130-097-1-en_GB.jpg

    Mild Steel Sheet 1000 x 500 x 1mm

    Mild Steel sheet 500 x 1000 x 1mm.
    86.88 AED
    250-526.jpg

    Battery Holder 1 x AA

    With snap connectors.
    3.16 AED
    250-606.jpg

    LED 5mm Ultrabright White

    These LED's are sold singly.
    4.74 AED
    450-039.jpg

    Cast Acrylic Sheet Clear 600 x 400 x 5mm

    Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.
    60.08 AED
    490-276.jpg

    Cast Acrylic Sheet Opaque White 1000 x 500 x 5mm

    Our cast acrylic is suitable for laser cutting, CNC machining, line bending and blow moulding. It can also be cut using a plastics cutter or on a bandsaw or scrollsaw. Often used for fabrication, laser engravings, noticeboards and signage and attractive displays. It is manufactured to a high standard and provides impact and UV resistance, good thermal stability and low water asorption. It is very easy to work with and cast in particular is recommended for CNC machining. We also have bulk packs available which save you even more money per sheet when buying larger quantities. Please note that due to the way cast acrylic is manufactured, the sheet thickness is nominal and may vary slightly +/- 18%.
    173.51 AED
    490-436.jpg

    High Impact Polystyrene (HIPS) Black 1372 x 660 x 1mm

    • Quality virgin grade material (can be used with food) • Convenient sheet size to fit specified vacuum forming machines • Strong bright colour
    77.47 AED
    530-174.jpg

    Chuck Key Rohm Type 34 13mm

    For Craft & Supercraft chucks.
    79.92 AED
    530-284.jpg

    Tungsten Carbide Router Bit Set of 30

    This set enabls the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Tungsten Carbide tips ensure long life and the sturdy aluminium storage case provides a safe place to store the bits when they are not being used. Contents: One of each Dia Depth Straight Cutter 5.0mm 12mm Straight Cutter 6.0mm 20mm Straight Cutter 8.0mm 20mm Straight Cutter 10.0mm 20mm Straight Cutter 12.0mm 20mm Straight Cutter 14.0mm 20mm Straight Cutter 16.0mm 20mm Straight Cutter 18.0mm 20mm Straight Cutter 20.0mm 20mm Dovetail Cutter 12.7mm 13mm 90 deg V cutter 9.5mm 9mm 90 deg V cutter 12.7mm 9mm Core Box 3.2mm Rad 6.0mm 6mm Core Box 6.35mm Rad 12.7mm 10mm Classical Pannel 12.7mm 9mm Guided Flush Trimmer 12.7mm 13mm 25 deg Guided Chamfer 16.0mm 9mm 45 deg Guided Chamfer 32.0mm 13mm Roman Ogee 4mm Rad 25.0mm 12mm Guided Rabbeting Cutter 28.6mm 13mm Guided Cove 6.35mm 22.0mm 12mm Guided Cove 9.5mm 28.0mm 12mm Guided Rounding over 3.2mm Rad 15.0mm 7mm Guided Rounding over 6.35mm Rad 22.0mm 12mm Guided Rounding over 7.9mm Rad 25.0mm 14mm Guided Rounding over 9.5mm Rad 28.0mm 14mm Guided Beading 3.2mm Rad 16.0mm 8mm Guided Beading 6.5mm Rad 22.0mm 12mm Guided Beading 7.9mm Rad 25.0mm 14mm Guided Beading 9.5mm Rad 28.0mm 15mm
    555.72 AED
    530-439.jpg

    Bosch PSS 200A Orbital Sander 230V

    BOSCH PSS 200A Consumer model. • Orbit diameter 2.0mm • Base plate size 93x185mm • Velcro fixing system • Integrated dust extraction facility • Ergonomic design allows for both single and two handed use • No load speed 24,000rpm • Soft Grip
    445.84 AED
    Refine
    207 More