B2B

QGT hammers have drop forged, hardened tool steel heads and lacquered ash handles. They comply with BS876.

For delicate, precision cutting, trimming and stripping. Shaft 120mm x 8mm dia.

Stanley Knife Blades 1991 Pack of 5

Stanley Throwaway Knife Pack of 50

• Easy to retro-fit to kilns without controls • Ideal for enamelling & jewellery • Single program • Heats at full power then soaks • Soak temperature & soak time can be reviewed or altered while firing • Delayed start facility • Power failure recovery • Selectable thermocouple types • Extensive kiln safety monitoring with alarm buzzer

Fast setting, extra strong weatherproof wood adhesive for interior or exterior use Complies with EN 204 Type D3 -weatherproof, water resistant wood adhesive. Suitable for all types of wood Dries to a clear finish No mess, clog-free nozzle and twist to seal cap Ready to use glue for internal and external use.

Cyanoacrylate super glue that bonds instantly. It requires great care as it bonds skin instantly. Debonder is available (D110-277) The safety dispenser provides one-drop control. Does not drip or run. Ideal for vertical, overhead or hard to reach surfaces. Bonds in seconds

Steel Nuts zinc plated pack of 100

• Cone driven • Low maintenance wheel • Reliable mechanism • Ideal for large pots • Forward and reverse switch • 1/2hp motor • Aluminium wheelhead • Weight 40Kg

High quality woodworking adhesive and medium made for us to BS4071. Dilute with water to the desired consistency, suitable for gluing a wide range of materials from wood to card and paper. It washes from clothes.

Dimensions (HxWxD): 10.2 x 19.8 x 6.4mm. These include switch body and contacts but not roller and long lever.

Keep your clay stored safely and usable for longer. Height - 1220mm Width - 920mm Depth - 640mm

Fibre glass clay bin. Holds up to 250kg of clay.

IRWIN Record Heavy-Duty 120 Series G Clamps are the strongest Record clamps, recommended particularly for metal working and fabrication work where a very high clamping force is demanded. They have a drop-forged steel frame for strength and durability with a swivel shoe which helps clamping on uneven surfaces. The twin-start ACME cold rolled thread for faster operation and the fused steel handle will bend before the clamp can be overstressed. A popular general purpose clamp for heavy-duty applications, for use in wood and metal working and other trades. Specification: Capacity: 200mm (8"") Throat depth: 89mm (3 1/2"")

Robust cast-iron frame with steel threaded bar. Tommy bar handle for easy tightening. Swivel shoe allows for clamping irregular-shaped objects. Copper-plated thread prevents weld spatter from sticking. Reinforced shoulders provide greater strength. Corrosion-resistant frame finish.* *QGT - Quality Guaranteed Tools. Tools from a variety of sources which offer exceptional value for money.

Heavy duty chisel for use in the cutting of mortices. Hardened steel blade is tapered towards cutting edge to prevent jamming. Fitted with splitproof boxwood handles. Supplied in a wallet.

These clamps allow one-handed operation. They have a quick release lever and are fitted with nylon work protector pads.

Cast iron head and slides. Steel bar handle, screw and pin.

Can be used without the need for either an energy or temperature regulator. If you wish to regulate the kiln temperature, then an optional energy regulator will enable you to do this. This works in the same way as a conventional oven by using the controller to set the kiln to operate at a set/consistent temperature. Please specify when ordering whether you require a regulator or not, as switching to a regulator after purchase without one, requires a two pin plug to be fitted to enable connection to the regulator. The 910-278 Kiln Temperature Programmer & Thermocouple does not require this. Max temp of 1000°C External dimensions HxWxD: 250 x 200 x 210mm. Internal dimensions HxWxD: 130 x 120 x 70mm. 0.9KW Weight: 4.5kg Supplied with a batt (ceramic shelf)

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applyingaerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A2 (model A200H) or A1 (model A100H) drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A2 size drawings/boards.

The air is exhausted at the rear of the cabinet, back into the workplace after a three stage filtration process. The model featured here is a general purpose workstation for applying aerosol adhesives, lacquers, fixatives and airbrush sprays to artwork which are placed onto a standard A1 drawing board within the hood enclosure. Boards fit at an angle for efficient overspray capture and ease of use. Accommodates A1 size drawings/boards.

Portable stands constructed of melamine faced MDF, to fit our extraction units. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. Illustration shows portable stand with ducted extractor. (HxWxD) 740 x 960 x 700mm.

Portable stands constructed of melamine faced MDF sized to fit our extraction units footprint. They have four wheels, two of which are lockable. The stands also include a single draw and cupboard. (HxWxD) 600 x 680 x 530mm.

Contains 3 particulate filters and charcoal filter.

Chrome plated axle caps to retain wheels on axles.

Charcoal filter for A100H & A200S fume extractor.

Made from high grade carbon steel with a matt black finish and black moulded electrostatic conductive handles. These handles dissipate static electricity, making the tools safe for use with static sensitive devices. Length -150mm, spring loaded opening.

Cross pein pin hammer with long ash shaft forged steel head and polished face. 100g/3.5oZ.

Self adjusting, built in cable cutter. Will strip flex from 0.2mm to 6mm2.

Side cutting blades with serrated pipe grip, joint cutter and polished head.

Half round section serrated jaws with side cutter. 125mm.

Thor rawhide mallets have genuine buffalo rawhide heads and wooden handles.

200mm long nose pliers.

When positioned at suitable distances apart, they can be used to develop quick foot, agility, speed and general coordination skills. Choose from three different heights to suit the age of your players or the needs of your club. PIECE one is finished in a bright and visible yellow colour to reduce the potential risk of injury or tripping. And, their lightweight design allows them to be transported and stores with ease.

When positioned at suitable distances apart, they can be used to develop quick foot, agility, speed and general coordination skills. Choose from three different heights to suit the age of your players or the needs of your club. PIECE one is finished in a bright and visible yellow colour to reduce the potential risk of injury or tripping. And, their lightweight design allows them to be transported and stores with ease.

High impact resistant shell, duel density foam padding with adjustable straps. Ideal for use during short corners.

From high grade steel. QGT