B2B

These models provide an even illumination over the whole viewing area by use of cool white fluorescent tubes mounted below a perspex diffuser and protected by a toughened glass working surface. The small louvres on all sides ensure natural air flow. Operating voltage 230v AC. • Aluminium construction coated with grey tough epoxy paint. • Perspex diffuser screen mounted below toughened glass. • Louvres on all sides to ensure natural air flow. • Size: A3

These models provide an even illumination over the whole viewing area by use of cool white fluorescent tubes mounted below a perspex diffuser and protected by a toughened glass working surface. The small louvres on all sides ensure natural air flow. Operating voltage 230v AC. • Aluminium construction coated with grey tough epoxy paint. • Perspex diffuser screen mounted below toughened glass. • Louvres on all sides to ensure natural air flow. • Size: A2

Pack of 100 A3 gloss laminating pouches.

Every mask could be different even though all are based on the same mould. Great for drama events, Halloween, puppets, publicity, etc. Overall size of mask 240 x 155 x 85mm deep.

Great for example teaching aids, puzzles, games, space vehicles, electronic gizmos, display cases etc. The mould consists of two parts, a base unit which can house inserts to the students own design, and the dome mould. From these two moulds three mouldings are produced in only two operations, which when used with the overlay technique developed at Full instructions are provided. Overall size 165mm . Comes on two baseboards for the 1210.

Automatic pencil with eraser. 0.5mm HB lead.

12 Assorted large artists brushes.

A tub of 150 individually wrapped colour coded needles for Tapestry/Crewel (cross stitch), Embroidery/Chenille, includes 5 needle threaders.

Cut length 9405mm 37"" x 1.5mm (A1+ size) • Genuine 20 sheet capacity • Self sharpening tungsten steel blades • Unbreakable head and frame • A size indicators • 5 years guarantee • Cut control plate eliminates overloading

Set of 15 assorted flat and round artists' brushes.

Contains one each of Cad Yellow, Cad Red, Ultramarine, Emerald, Titanium White & Mars Black.

A bag of 20 x 100m bobbins of polyester thread including 3 Black, 3 White & 14 assorted colours.

Pack of 100 sheets.

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent.

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent. Size 300 x 225mm

These cutting mats are laminated PVC with a special surface coating. This ensures that there is no visible trace of cutting and complete penetration of the mat is impossible. They are non-slip and non-reflecting with a 5mm grid pattern on one side. Ideal for all cutting jobs regardless of the type of knife or material. Available in Green and Transparent. Size 300 x 225mm.

Cut length 480mm 19"" x 2mm (A3+ size) The MasterCut MCA3 has been specifically designed to offer a Premium Quality cutting machine, without the Premium. By utilising many of the components used in the highly regarded Professional M Series the MasterCut range offers Rotatrim quality at a similar price point to many lower quality trimmers. The patented Overload Protection system ensures that it is virtually impossible to overload the machine, even by the most heavy-handed of users, and ensures that the cut is always made in the correct direction*. Designed specifically for amateur and semi-pro photographers, office presentation and classroom use, the MasterCut range is the perfect machine for accurate, consistent quality finishing, where robustness and affordability are key requirements. • Cut control plate eliminates overloading • Highly robust and reliable construction. • Solid laminated MDF gridded baseboard, allowing accurate placement of work. • Clear, self-clamping strip secures the work in place, while offering a clear view of the cut. • Precision side rule and cursor, allowing accurate 90° and measured cuts. • Single square chrome-plated steel guide rail that is highly resistant to cutting head swivel. • Virtually maintenance-free, self-sharpening blades ensure a low cost of ownership and ease of use. • Complete Confidence - Rotatrim 5 Year Guarantee. • Cut Length: 480mm, 19in • Size Guide: A3+ • Overall Length: 665mm • Cut Capacity: 2.0mm

Walleted set of four - line widths of 0.1, 0.3, 0.5 & 0.7mm.

These value packs are ideal for classroom use. 24 each of Black, Red, Blue, Yellow, Green, Orange, Brown, Purple, Light Blue, Grey, Light Green, Pink.

This Compass CR balance provides basic weighing functionality and competitive performance at an economical price. Features such as a slim, stackable design, and an enlarged weighing platform, make the CR series perfect for a variety of portable weighing applications. •Display - Liquid Crystal Display (LCD) •Operation - 3 AA batteries (included) or AC adapter (not included) •Construction - ABS housing and pan, transportation lock, slip-resistant feet •Design Features - Stability indicator, mechanical and software overload/underload protection, auto shut-off.

18cm plastic scoop thermometer

Goal includes net. Provides an introduction to team sport in the pool. Foam supports keep the hoop above water. Easy to assemble.

Aluminium screw cap and rubber liner for McCartney bottles.

This Compass CR balance provides basic weighing functionality and competitive performance at an economical price. Features such as a slim, stackable design, and an enlarged weighing platform, make the CR series perfect for a variety of portable weighing applications. •Display - Liquid Crystal Display (LCD) •Operation - 3 AA batteries (included) or AC adapter (not included) •Construction - ABS housing and pan, transportation lock, slip-resistant feet •Design Features - Stability indicator, mechanical and software overload/underload protection, auto shut-off.

Glass with vinyl teat, plastic interchangeable stopper and glass pipette. Supplied in packs of 10.

Recommended by CLEAPSS' guide GL240, a high-quality burner with refillable gas tank and thumb-operated electric ignition. It provides stable, controllable flame. The housing stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 70 minutes small flame on full tank • Can be refilled with GA130510 • Rekrow model RK4601 • Flame temperature up to 1,250 °C • Output 0.75 kW • 30 g tank capacity • Consumption: 56 g/hour • Base diameter: 79 mm • Width: 127 mm • Height: 75 mm • Weight: 410 g (without fuel) • CE marked

Recommended by CLEAPSS' guide GL240, a high-quality burner with refillable gas tank and thumb-operated electric ignition. It provides stable, controllable flame. The housing stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 70 minutes small flame on full tank • Can be refilled with GA130510 • Rekrow model RK4601 • Flame temperature up to 1,250 °C • Output 0.75 kW • 30 g tank capacity • Consumption: 56 g/hour • Base diameter: 79 mm • Width: 127 mm • Height: 75 mm • Weight: 410 g (without fuel) • CE marked

Recommended by CLEAPSS' guide GL240, a high-quality portable laboratory burner, with refillable gas tank and thumb-operated electric ignition. It provides an adjustable flame, similar to a Bunsen burner. The tank stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 80 minutes small flame on full tank • Can be refilled with GA130510 • Flame temperature up to 1,250 °C • 30 g tank capacity • Width: 115 mm • Height: 96 mm • Weight: 430 g (without fuel)

Recommended by CLEAPSS' guide GL240, a high-quality portable laboratory burner, with refillable gas tank and thumb-operated electric ignition. It provides an adjustable flame, similar to a Bunsen burner. The tank stays cool enough to touch even after sustained use. • Heavy base design for stability • Easy to refill • Electric instant ignition system • Built-in safety pressure release valve • 35 minutes large flame on full tank • 80 minutes small flame on full tank • Can be refilled with GA130510 • Flame temperature up to 1,250 °C • 30 g tank capacity • Width: 115 mm • Height: 96 mm • Weight: 430 g (without fuel)

This safe, reliable power supply is lightweight and robust. It features short-circuit protection, overload protection with automatic reset, and thermal cut-out. Regulated DC with a simple rotating switch to select the voltage, as well as an on/off switch. Output is via colour-coded terminal sockets. The selectable output voltage wheel ranges from 3 V, 4.5 V, 6 V, 7.5 V, 9 V and 12 V. Conforms to CE:EN61010-2010

This safe, reliable power supply is lightweight and robust. It features short-circuit protection, overload protection with automatic reset, and thermal cut-out. Regulated DC with a simple rotating switch to select the voltage, as well as an on/off switch. Output is via colour-coded terminal sockets. The selectable output voltage wheel ranges from 3 V, 4.5 V, 6 V, 7.5 V, 9 V and 12 V. Conforms to CE:EN61010-2010

Made in the UK without acid or chlorine, it's environmentally friendly and FSC certified. Size: A1 Weight: 220gsm Ideal for: Heavyweight drawing paper, printmaking, watercolour, acrylics. Similar to card stock or light poster board.

The model DS has double O ring washers for increased suction. Replaceable nozzle. Lightweight and easy to use.200mm long x 20mm dia.

60/40 Tin/Lead alloys with five cores of non corrosive flux. The 'Savbit' alloy will help prevent corrosion of copper soldering bits.

Spare sponge for ST4 & ST6 soldering iron stands.

Soldering Iron Element CS Iron 240v

The ST6A is an industrially styled bench stand for ANTEX M, C, CS, XS, TCS, TC & SD soldering irons. Ideal for use when a fume extraction tube is used. It is manufactured from high grade materials, suitable for use with soldering iron tip temperatures. It incorporates slip-resistant feet, and a ballast weight for added stability. The innovative design ensures that the soldering iron handle temperature is kept to a minimum when the iron is placed in the stand for long periods.

Supplied fitted with a 3 pin connector for connecting to appropriate service trunking or the Antex power supply (700-190).

60/40 Tin/Lead alloy with low fume, high purity halide free flux core. For use where a minimum of fume and residue are required. 500g reel.

This power supply unit plugs directly in to a standard13A mains socket. Maximum power rating 24W, suitable for use with the 24 volt versions of the Antex C, M, CS or XS irons.

Omega lead-free solder is the ultimate in environmental health management, manufactured in the U.K. from 96% tin, 3.5% silver and 0.5% copper. It is rosin-free, halidefree and has a flux content of 3%. and a melting point of 217 °C. 250g reels.

For general purpose welding and brazing.

Sifbronze No.1 brazing rod for general purpose use. Melting Temp: Between 875 - 895 ºC

• Nominal Power - 18 watts • Supplied with long-life iron plated bit • Antex 1100 bit is fitted to this iron (2.3mm) • An inner ceramic shaft provides near perfect insulation • Burn-proof silicone cable. Ideally suited to educational environments • Supplied complete with 2.3mm bit, 1.5m of cable and full instructions • CE marked Uses 1100 series replacement bits and a range of alternative sized bits are also available. Soldering iron stands are available separately.

Best quality. Sheet size 280 x 230mm. Grade: S2 coarse (40 grit). Note: Colour may vary.

Best quality. Sheet size 280 x 230mm. Grade: F2 100 grit. Note: Colour may vary.

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

• Packs of 25 sheets • Silicone carbide paper sheets. Latex quality • Sheet size 280 x 230mm

Fast flow Hardcore Solder is a flux core contained within a high purity solder wire. It eliminates soldering defects, has no offensive odours and is an assured non-corrosive, no-clean solder. 500g reels.

Soldering Iron Tip for CS Iron 2.3 dia point