B2B

The air track measures 1.2 metres and is made from high strength 56 x 56 mm extruded aluminium. Includes instruction manual and accessory kit which enables investigation of: • Velocity • Force and acceleration • Potential energy • Kinetic energy • Conservation of energy • SHM • Motion on level and inclined planes

Air track blower suitable for use with the compact linear air track FO150710. Please note this blower is not powerful enough for larger air tracks.

A precision machined, metre linear air track, of lightweight yet durable aluminium extrusion construction. The length is drilled with holes, such that when attached to blower, near-frictionless surface is created. The track rests on three adjustable feet, so it can be made perfectly horizontal with respect to gravity. The kit includes set of accessories for wide range of investigations: • 2 sliders • 10 bolt and wing nuts • 4 spring attachments • 4 spring/string attachments • 4 springs • 2 Velcro attachments • 2 pulleys, strings • 4 slotted masses hanger • 8 photogate flags • 2 photogate arms • 1 latching cradle/bumper • 4 masses for the sliders • Assembly instructions experiment guide Air blower FO180615 sold separately.

A blower specifically for the FO180610 air track.

A superb quality air track made from square section aluminium extrusion with supporting ""U"" channel. Linearity is +/- 0.03 mm. Suitable for elastic and inelastic collisions, momentum, speed and acceleration measurement. The track rests on three rubber feet, two of which can be adjusted. Each side has scale graduated in mm. The track is supplied with two carts and a standard accessory set. Additional accessories available on request. Dimensions (L): 2 metres. Standard Accessory Set contains: • Fork with plug connectors (3) • Holder with plate and plug connectors (3) • Holder with needle and plug connector (1) • Tube with wax and plug connector (1) • Holder with hook and plug connections (1) • 25 and 100 mm Apertures with plug connectors (1) • Weights 50 g for carts (4) • Pulley with connectors (1) and carts (2).

Standard Accessory Set contains: • Fork with plug connectors (3) • Holder with plate and plug connectors (3) • Holder with needle and plug connector (1) • Tube with wax and plug connector (1) • Holder with hook and plug connections (1) • 25 and 100 mm Apertures with plug connectors (1) • Weights 50g for carts (4) • Pulley with connectors (1) and carts (2).

Spare cart for the Frederiksen linear air track, TI68740.

Extremely quiet air blower with continuously adjustable speed for use with the premium air track TI68740. Complete with 1.7 metre hose. Mains supply: 220-240 V AC. Mass: 5.7 kg. Dimensions (L x W x H): 280 x 250 x 210 mm.

Economical but good quality slotted mass set made from coated steel alloy. Set comprises 1 x 100g mass hanger plus 9 x 100g masses. Tolerance ±5%.

Economical but good quality slotted masses made from coated steel alloy. Set comprises 5 x 100g masses. Tolerance ±5%. Hanger not included.

Economical but good quality mass hangers made from coated steel alloy. Set comprises 5 x 100g mass hangers.Tolerance ±5%. Masses not included.

Iron, with ring.

Iron, with ring.

Slotted. Circular with hole and slot % tolerance.

Slotted. Circular with hole and slot 1% tolerance.

Slotted. Circular with hole and slot 1% tolerance.

Slotted. Circular with hole and slot % tolerance.

Brass masses made to 1% tolerance.

Brass masses made to 1% tolerance.

Brass masses made to 1% tolerance.

Brass masses made to 1% tolerance.

Brass hangers made to 1% tolerance.

Brass hangers made to 1% tolerance.

Brass hangers made to 1% tolerance.

Brass hangers made to 1% tolerance.

Each hanger will hold up to 17 masses of 1kg.

Iron mass, 1 kg.

Iron mass, 500 g.

Slotted alloy masses. Tolerance ±2 %. Sets comprise masses and hanger of equal mass.

Slotted alloy masses. Tolerance ±2 %. Set comprises masses and hanger of equal mass.

Slotted alloy masses. Tolerance ±2 %. Set comprises masses and hanger of equal mass.

Slotted alloy masses. Tolerance ±2 %. Set comprises masses and hanger of equal mass.

Slotted alloy masses. Tolerance ±2 %. 100 g mass.

Slotted alloy masses. Tolerance ±2 %. 50 g mass.

Slotted alloy masses. Tolerance ±2 %. 10 g mass.

Slotted alloy mass hanger. Tolerance ±2 %. Masses not included.

Slotted alloy mass hanger. Tolerance ±2 %. Masses not included.

50 mm diameter aluminium wheels in metal frames, accurately centred.

50 mm diameter aluminium wheels in metal frames, accurately centred.

50 mm diameter aluminium wheels in metal frames, accurately centred.

Cone bearing pulley mounted in an aluminium boss and clamping screw. Fits all standard retort rods. Pulley Dimensions (Dia.): 50 mm. Boss Dimensions: 100 x 20 x 20 mm (L x W x D)

Pulley mounted in robust frame with two clamping screws for mounting onto bench up to 38 mm thick or standard retort rod. Dimensions (Dia.): 70 mm.

Pulley mounted in metal frame. Suitable for clamping to bench, table etc. up to approx. 30 mm thick. Dimensions (Dia.): 50 mm.

The kit makes use of an empty 1 or 1.5 L plastic bottle. The special cap, nozzle and fins supplies are attached to the bottle. An air tube and adapter are supplied to connect the bottle to cycle pump. The bottle is part filled with water and air pumped into the bottle. The pump connector on the bottle releases at set pressure and the rocket is then launched. The rocket will reach height of approximately 20 metres. The bottle and cycle pump are not supplied, all spares available. Complete with full instructions.

Spare white cap and 'O' ring for Water Rocket Kit RO12950.

Spare red fin (1 only) for Water Rocket Kit RO12950.

Spare black nozzle for Water Rocket Kit RO12950.

Design and make your own realistic rockets and launch them safely to heights of up to 100 metres. The rockets are made by rolling paper around a plastic tube and attaching a plastic nose cone. They are propelled using an electrically-controlled compressed air launcher which gives near-chemical performance but at zero cost per launch. Provides opportunities for exploring basic rocket science enhancing subject teaching in design and technology, science and maths. Contains launcher and key switch 'firing' unit. Uses any cycle or car foot pump (not supplied) and requires alkaline PP3 batteries. Please note: packs of plastic nose cones are available separately.

A pack of assorted coloured soft plastic nose cones to fit rockets made with the 21.5 mm diameter mandrels.

To fit the 21.5 mm diameter launch tube of the Rocket Factory.