B2B

Clear white glass. 60° 60° 60°.

Clear white glass. 60° 60° 60°.

Clear white glass. 90° 45° 45°.

A ventilated metal lamp house having an open front with extended finned sides and vertical internal grooves. The light source comprises 12 S.B.C. lamp in holder with m of twin flex. Complete with metal plate having single and triple slits, one side matt black, the other white. Takes 45 mm wide accessories.

Slit plate, 3 & 1 narrow slit for ray Box OP11808 (slit only)

Plastic cylindrical lenses, W45 x FL100 mm for Ray Box OP11808.

12 V 21 W SBC lamp axial filament 48 mm length. Suitable for Ray Box OP11808.

This laser optics kit can be used in bright light conditions thanks to the multi-beam red laser light source. The kit comes complete with Plexiglass (Acrylic) optical accessories and the laser is switchable between 1, or beams, which are all parallel to each other. Comes complete with aluminium storage case. Kit components: Laser class II (1 mW): 1, or laser beams Power supply for laser: 6.3 V mains adaptor mat with disc graduated in degrees and rule graduated in mm, 210 x 380 mm, 150 mm diameter graduated disc Flexible mirror (plane, concave or convex) Optical blocks/prisms: rectangular; parallel faced; semi-circular; biconvex; biconcave lens; semi-circular tank; trapezoid.

Spare triple/wide slit plate for OP94740.

Spare single/double slit plate for OP94740.

Clear Glass with ground ends and optically worked faces. 50 x 50 mm. Power Dioptres +10

Spare colour filter set for OP94740.

An economical LED Ray Box, housed in traditional die cast enclosure. The unit is supplied with slit plate and battery pack as power source, which requires 2 x AA batteries (not included). The battery pack plugs into 4 mm sockets mounted on the Ray Box.Please note that when using a power supply, it must be DC and the volatge must not exceed 3 V. A higher voltage will blow the LED and invalidate the warranty. However, the LED assembly can be replaced. Takes 45 mm wide accessories.

Spare battery box for ray box OP130515.

LED assembly for OP130515.

Comprehensive light and optics set which includes a 3 beam ray box (each beam available in dual colours – white or red) and an array of lenses and prisms, teacher’s notes and 9 pupil work cards. The set is an ideal accompaniment to any advanced study of light and optics with experiments to show refraction and reflection through various shaped prisms and lenses, the splitting of light into the rainbow colours, how internal reflection is used in fibre optic cables and the appropriate lenses to use to correct long and short sightedness. Requires 3 x AAA batteries.

Spare single and double slit for OP180740.

A metal ray box with sliding lamp holder. Supplied with single/double wide/triple slit plates, and 12 V 21 W lamp. Captive flying leads with 4 mm plugs for connection to power supply. Takes 50 mm wide accessories.

This comprehensive kit with a ray box and 29 optical components is ideal for performing a large variety of reflection, refraction, and colour mixing experiments. The ray box consists of a 12 V, 24 W halogen lamp producing convergent, divergent or parallel beams. One end contains an adjustable cylindrical convex lens (for parallel beam), and on the other end a triple aperture system for colour mixing experiments (lateral aperture is provided with adjustable hinged mirror). All apertures in the box are provided with vertical channels to hold slit plates and colour filters. •Versatile ray box with hinged mirrors & 29 optical components makes it the most comprehensive kit available for demonstrating geometrical optics and the study of light to physics students •Includes a high-quality ray box with a bright halogen lamp providing divergent and parallel beams and hinged mirrors for colour mixing experiments •Includes a comprehensive instruction guide with 18 activities •Components include: 1 x ray box with hinged mirrors, 1 x lamp holder, 2 x 12 V, 20 W bulbs, 2 x 4 mm banana plug leads, 2 x slit plates, 1 x rectangular prism, 1 x 45/45/90 prism, 1 x Equilateral prism, 1 x 30/60/90 triangular prism, 1 x semi-circular prism, 1 x bi-concave lens, 2 x bi-convex lens, 1 x plane mirror on stand, 1 x parabolic mirror, 1 x semi-circular mirror, 1 x semi-circular dish, 8 x colour filters, 8 x colour cards, 1 x manual •A 12 V DC power supply is required for the ray box. Ruler, protractor, and paper are required for the activities.

Students can carry out wide range of optics experiments with this high quality, robust ray box. Designed with two slots to hold blanking plates, seven grooves for lenses. Supplied with 12 V, 24 W, bulb, holder, slit plates blanking plates made from heat resistant plastic. Takes 50 mm wide accessories.

Spare slit plate, pack of 2, for Premium Ray Box OP94745.

Spare slit plate, single and triple, for Premium Ray Box OP94745.

Collimating Lens, Spare 50 x 50 mm f.l. 75 mm for Ray Box Premium, OP94745

This Spectral lamp house is designed for use with spectral lamps which fit E-27 socket. The spectral lamp must never be connected to the mains, but requires a special control transformer. The Spectral lamp house is equipped with a ventilator ensuring that the surface of the Spectral lamp house does not exceed 60 °C.

Control transformer required to power the Spectral Lamp Holder OP110180. The unit has specialised 3-pin socket for connecting the lamp holders (female switch that fits E27 3-pin special switch). •Current: 1 A max. •Power supply: 230 V AC •Dimensions: (W x H x D): 190 x 117 x 230 mm •Weight: 3.5 kg Note:- Lamp Holder not supplied.

Sodium spectral lamp with E27 screw type fitment. Requires lamp holder (OP110180) and transformer (OP110185).

Mercury spectral lamp with E27 screw type fitment. Requires lamp holder (OP110180) and transformer (OP110185).

For quick and safe setting up of spectral tubes. The spectral tube is mounted from the front in the insulated holders with electrodes, where the lower holder is spring loaded parallel to the tube axis. The holder is provided with power supply that can deliver 6 kV DC at max 2 mA to the electrodes built into the base of the insulated holder. Can be used with spectral tubes OP66582 to OP94616 and with many other types of spectral tubes. For 230 V AC. Dimensions (L x H x W): 78 x 78 x 290 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length x 6 mm diameter. Total length approx 220 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length x 6 mm diameter. Total length approx 220 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length x 6 mm diameter. Total length approx 220 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length x 6 mm diameter. Total length approx 220 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length x 6 mm diameter. Total length approx 220 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length 6 mm diameter. Total length approx 220 mm.

Straight pattern, fitted with 6.5 mm diameter contact cap at each end. For observing line and band spectra from various noble and diatomic gases. The capillary tube measures 80 mm length 6 mm diameter. Total length approx 220 mm.

For rapid examination of spectral composition of white light. Consisting of metal tube with draw out focussing and an adjustable slit fitted with achromatic objective glass and element prism.

This direct vision spectroscope incorporates fine slit in conjunction with an efficient blazed grating, which transmit high proportion of energy into the first and second order spectra, giving very bright and sharp spectra. The third order spectra can also be seen, although not as brightly.

Spectroscopy is an interesting visual subject for students. This spectroscope helps teachers to demonstrate simply and clearly. Uses include; •Fraunhoffer lines •Flame test in chemical analysis •Absorption spectra through liquids •Bright line spectra from discharge tube Features; •Large diameter eyepiece aperture facilitates comfortable viewing of the single, large and bright spectrum which is centrally placed in the field of view •High quality optical components ensure that absorption bands show up clearly – even weak bands that are sometimes difficult to detect •The spectrum is generated by a particularly bright transmission diffraction grating of 600 lines/mm •Fixed construction – no need for adjustment •Robust assembly to withstand years of student handling •Benchtop size: 105 mm x 25 mm •Boxed weight: 115 g •Supplied in a protective rigid box

The performance of this ultra-low cost spectroscope is comparable with instruments costing much more. It uses a CD or DVD as a reflective diffraction grating and clearly shows Fraunhofer lines in the spectrum arising from natural light, distinctive emission bands from artificial sources such as sodium lamps and differences between different types of fluorescent lighting tubes. The spectroscope is made from polypropylene and supplied in flat pack form for quick self-assembly. It comes with free CD but can be used with any CD (or DVD for higher resolution).

An economically priced instrument, which is nevertheless capable of much useful quantitative work. The main structural parts, including the collimator and telescope bodies are heavy castings, other metal parts being bright plated. SCALE: 170 mm dia. divided to 360° 1°, independently rotatable with locking screw. spring-loaded vernier scale attached to the telescope mount provides readings to 0.1° (6 minutes of arc). COLLIMATOR: Mounted on a fixed pillar with axis adjustment. Objective lens 150 mm FL, an aperture of 21 mm and is carried in spiral focusing systems. Unilaterally adjustable slit 6 mm long. TELESCOPE: Mounted on moveable pillar with adjustment, locking screw and axis adjustment. Objective lens has 170mm FL, 21mm aperture and is carried in spiral focussing system. RAMSDEN EYEPIECE: With cross wires and locking ring focus adjustment. PRISM TABLE: The table is provided with three leveling screws and is line marked to assist placement of prism. STANDARD ACCESSORIES SUPPLIED: 1 prism clamp for prisms up to 40 mm high, 1 diffraction grating holder, aperture 25 x 25 mm, 1 small screwdriver, 1 tommy bar for axis adjustment and case.

Exclusive to Timstar, this superb, durable, easy to set-up and use digital spectrometer creates real-time images, graphs and measurements via the exclusive software. Once the software has been downloaded and installed, the spectrometer simply plugs into a USB port and the live-feed camera is selected by clicking on a tab. That's it you are now up and running. The software also includes a reference library of common elements. Suitable for use with: flame emissions from burning salts; spectral (gas) tubes; LED's LED columns; many other types of visible light source. Includes Camera, Tripod, USB lead, Software and Tutorial Videos. For video demonstration: timstar.co/RSPECvideo • Simple to set-up and easy to use. • All students see the same thing via classroom projector and whiteboard. • Camera auto-focuses and adjusts to wide range of light conditions. • Spectral range: 390 to 700 nanometres. • Accuracy: 1% or better. Spectroscopic features as narrow as nanometres can be measured. • Works with any Windows computer (XP or more recent). • Designed for education and research • No tricky calibration or adjustments to make- just plug and play • Comes complete with instructional videos (more than 30 minutes total)

Equal mass diameter cylinders showing the difference in density of metals. Comprises six 100 g, 16 mm diameter cylinders of brass, lead, copper, iron, zinc, and aluminium in wooden holding block.

A set of cubes for density investigations or comparison of different materials, consisting of nine 25 mm sided cubes. Set includes brass, iron, copper, aluminium, hardwood (beech), softwood (pine), nylon, PVC and acrylic. Supplied in wooden box.

This Mole Set contains samples of four different metals and helps students to visualise mole of substance in solid state, as well as developing better understanding of the concept of the mole, mass, molar mass, along with the differing properties of the various metals. The set contains four element specimens: copper, iron, zinc and aluminium, each containing approximately one mole (6.023 1023 atoms) of the element. Comparison of each sample, side-by-side, clearly shows that the same molar amount of different elements have different masses and occupy different volumes, due to each element having different atomic mass and density.

A quality piece of apparatus to demonstrate the relationship between the extension of a spring and the load applied to it. Consists of a moveable 120 mm scale that is mounted on a stand and base. Comes complete with a combined mass hanger/pointer which is connected to the suspended spring to allow easy reference to the scale. Dimensions (H x Dia.): 250 x 100 mm.

Comprising aluminium, brass, copper, iron, lead, zinc and tin. By examining properties such as magnetism, density and appearance, and comparing to known data, students can identify each material. 10 mm dimensions set.

Comprising aluminium, brass, copper, iron, lead, zinc and tin. By examining properties such as magnetism, density and appearance, and comparing to known data, students can identify each material. 20 mm dimensions set.

Set of discs comprising aluminium, brass, bronze, copper, nickel silver, steel, stainless steel, and zinc. The metal name is stamped onto each disc.

Set of metal pieces each stamped with the identifying letter. Comprising: soft aluminium, hard aluminium, magnetic stainless steel, non-magnetic stainless steel, zinc, zinc plate, nickel silver, bronze, galvanised steel, mild steel, copper and brass.

Dimensions, 200 x 12 mm.