B2B

Combined HEPA/Gas filter for BOFA AD1000/iQ

Deep pleat pre-filter for AD1000/iQ

PVA (Polyvinyl Alcohol) is a water soluble support material for multi-extrusion 3D printing. With a good thermal stability, Ultimaker PVA is ideal for printing complex models that require supports for large overhangs, deep internal cavities, and intricate geometries. Designed for a seamless 3D printing experience, our PVA provides good adhesion to both PLA and Nylon. • Good thermal stability resulting in better degradation resistance compared to other PVA filaments • Less moisture sensitive than other PVA filaments • Great adhesion to both PLA and Nylon • Safe dissolution in tap water (no harmful chemicals required) • Biodegradable with no hazardous by-products PVA allows to effortlessly create complex 3D prints by building water soluble support structures. 1. Submerge. Put your 3D print in cold or warm water depending on the build material. 2. Rinse. After PVA supports are dissolved, rinse the 3D print to remove any excess PVA solution. 3. Dry. Let the 3D print dry and apply additional post processing to the build material if necessary. As a water soluble support material, Ultimaker PVA empowers engineers and designers to create highly detailed surfaces and complex moving mechanical parts in just one run. Coupled with the right build materials and our proven material profiles in Cura for Ultimaker 3, our PVA opens up a whole new world of opportunities for intricate designs and versatile applications.

• A constant temperature to prevent warping (detachment of the part) and facilitate 3D prints that require difficult-to-print materials (ABS, PC) • The air is replaced using a professional fan and HEPA filter • No more draughts during printing • The cover can be installed and uninstalled easily without damaging the printer. No screws or drill needed; simply clip on the kit • A latch closes the door and protects prints from any outside access. This latch is particularly useful in an educational context to protect high-temperature parts • No odour or smoke escapes from the printer thanks to the HEPA filter which has a working life of between 600 and 1200 hours depending on the materials and print settings

The Ultimaker S3 is a complete production system you can depend on in the office or studio. With advanced features to ensure a reliable printing experience, it's still simple to use thanks to its award-winning touch interface and seamless software integration. • Dual extrusion with a build volume of 230 x 190 x 200 mm (9 x 7.4 x 7.9 inches) • Down to 20 micron (0.001 inch) layer resolution • Open filament system, compatible with glass and carbon fibre composites • Dual filament flow sensors notify you if material runs out • 4.7-inch touchscreen interface Winner of iF Design Award 2019

For high precision cutting of medium and heavy duty materials.

With snap connectors.

Low cost batteries with a shelf life of 2 years and are suitable for low drain applications. Pack of 2.

4mm black stackable plugs pack of 5

4mm red stackable plugs pack of 5

5mm ultrabright white LED, pack of 10

5mm ultrabright Red LED, pack of 10

Pack of 10 minature LDRs

Simple push to make switch - pack of 10

Lever toggle switch SPST, pack of 10

Pack of 10 buzzers with leads 6V

Carbon film resistors pack 1000

Pack of 10 mains fuses

This heavy duty A3 laminator features a double heating system utilising a hot roller and plate, providing high quality lamination. It also features clear instructions on the front of the product and a digital display for precise settings. With an operating speed of 465mm per minute, this product also features an anti-jam reverse function, helping to keep your workstation running smoothly.

Ideal for use with wood chisels. Size: 115mm

Reduces the standard forming area of the C R Clarke 750 vacuum former from 482 x 432mm to 228 x 216mm.

Pack of 10 assorted diameters, 2 each of 5, 6, 8, 10 and 20mm.

Nine speeds Vee belt drive Head tilts left to right, calibrated to 45° 360° rotation on horizontal axis One shot lubrication system to slideways and leadscrews to ensure prolonged machine life Choice of spindles - R8 or 3MT • Choice of either metric or imperial leadscrews • Traditional design with elevating knee, supported on double dovetail vee ways to ensure positive alignment • Tapered gibs to X, Y and Z axes • Rack and pinion feed and calibrated fine feed to quill • Locks to X, Y and Z axes • Interlock belt guard • Cabinet stand included. •New! LED lighting

The rip fence is aluminium section allowing for two working positions (ripping and angled ripping). It is fixed to a cast iron mounting bracket for rigidity and has integral micro adjustment. A telescopic extension arm is fitted to the cross cut fence for setting the timber stop. The 620mm Cross Cut Table is designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming. It has a maximum depth of cut 105mm @ 90° and 76mm @ 45°, double sided saw guard with dust extraction outlet, enclosed drive mechanism. Supplied with an anti kick saw blade. Thermal overload, no-volt release switch, lock off emergency stop switch and foot operated foot switch are fitted as standard. Fitted with keyswitch.

The hand-wheel is made from an ergonomically designed one piece casting for comfort of use whilst also providing additional weight to the headstock. These models come with 12 speeds making them ideal for drilling metal as well as wood. MT2 arbor No volt release switch Complete with 16mm chuck We strongly recommend footstop switches are added to these machines to comply with BS4163:2007.

It features 140rpm wheel speed, force-fed recirculatory coolant systems and a tool holder that accepts up to 60mm wide blades. The centre swivel arm has fine adjustment control to ensure that the tool edge and grinding wheel remain in perfectly flat contact. Safety features include a no-volt overload pushbutton starter, large foot stop switch and an automatic safety cut-out if the front door is opened whilst the machine is switched on. KEY FEATURES • Controlled 140rpm wheel speed • Force-fed recirculatory coolant system and anti-spill tray • Integral oil reservoir with filter • Tool holder for blades up to 60mm wide • Radius gouge attachment • Centre swivel arm with vernier adjustment

Fixing kit for 7inch vices.

The head itself is counterbalanced by a weight, giving fingertip control to the rise and fall and eliminating the breakages associated with spring type mechanisms. Its 1.1kw industrial fan cooled motor provides ample power for continuous duties and is fitted with a fully guarded adjustable chuck. Unlike a collet type system the chuck holds the auger firmly round its circumference, true to the centre line of the chisel, securing longer tool life and better cutting capability. The table has longitudinal and lateral movement on a single handwheel, not only for ease of operation, but also for more precise positioning: lateral adjustment of the table being better controlled by a central screw. The angled timber clamp is adjustable on a tee slot, to give a maximum timber width of 200mm. Coupled with the height adjustable chisel head which can give a maximum timber height of 255mm underneath the chisel, the Sedgwick 571 has exceptional capability. For repetition work there are longitudinal stops along the front of the table, a marking out rail complete with turnover stop along the rear; and 2 position depth stop for haunching. The switchgear has no volt release, thermal overload protection, and a mushroom headed stop button.

This bench is fitted with a beech top. Standard sizes 1800mm long, 760, 810 or 910mm wide and 810 or 860mm high. A maximum of 4 metalwork vices can be fitted (sold separately).

Replacement filter (spring type set) for the TSUB dust extractor.

Replacement main filter for the TSMB dust extractor.

Replacement after filter for the TSMB dust extractor.

Replacement filter for the TSPL dust extractor.

Replacement filter for the TSHS dust extractor.

Includes filter moitoring system to help identify when filters need replacing. Large dust collection tray and filter shaking mechanism.

Metal framed bench with a beech top and fitted cupboards underneath, a maximum of 4 metalwork vices can be fitted (not included). HxWxD: 860 x 810 x 1800mm.

The 6x 68mm deep drawers provide ample space for A1 size paper and slide on easy-glide runners to ensure smooth action even on when drawers are heavy with paper or card. Modern bow handles, finished in silver, stylishly complement each drawer providing a sturdy grab point on each drawer when sliding them out and back in. Steel legs, powder coated in a deep charcoal black, neatly frame the drawers beautifully and look superb and also match the black finish on the inside of the drawers. Available in grey, light oak or beech.

Suitable for small power tools. • Single motor • Two stage filtration • Supplied with hose

For use with your RICOH SG 3110DN

Black Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 42ml

Cyan Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Magenta Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN Size: 29ml

Yellow Sublijet Ink Cartridge for Printers 3110DN & SG 7100DN. Size: 29ml

Black Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 75ml

Cyan Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Yellow Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Magenta Sublijet Ink Cartridge for RICOH Printer SG7100DN Size: 68ml

Contains: • A4 Virtuoso SG500 Printer for Sublimation • 4 x Sublijet Virtuoso HD Standard Cartridge, Black 42ml, Cyan, Yellow, Magenta 29ml • Adkins HPD A4 Clam Heat Press • 2 packs of sublimation paper • 2 x rolls of Heat Tape The included True Pix paper is suitable for all standard sublimation printables, if you wish to sublimate onto soft plastic sheets such as the special vacuum forming sheets, please use the special sublimation paper available separately (535-114 & 535-115).

Sublijet Virtuoso HD Standard Cartridge 42ml Black

Sublijet Virtuoso HD Standard Cartridge 29ml Cyan